Only show results available in Virginia? Ok

Biodiesel Analysis Applications

  • Premium

    Machine condition monitoring for biofuels

    Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Laboratory instrumentation solutions for the biodiesel research

    As biodiesel is formed through a simple transesterification, it is easily monitored and characterized by NMR Spectroscopy. This analytical technique allows easy, non-destructive evaluation of many of the components regulated in biodiesel standardization (e.g., water, alcohol, phosphorous, and glycerol content). Subsequently, the NMReady could be easily incorporated into characterization to improve workflow. NMR Spectroscopy can be used to quantify the percentage of biodiesel in composite fuel mixture. Click HERE...

    By Nanalysis Corp. based in Calgary, ALBERTA (CANADA).

  • Agitation and mixing solutions for ethanol / bio diesel

    Ethanol can be produced from a variety of raw materials such as corn, sugar cane, soy beans, switchgrass, corn stover, and cellulosic materials. Corn can be processed in a dry or wet mill to produce ethanol. Advances and research in ethanol continues to find new and more energy efficient ways to produce ethanol and biofuels and new raw materials for production.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN DIESEL FUEL OR DOMESTIC HEATING FUEL BY MID-IR SPECTROSCOPY

    Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you