Biodiesel Analysis Equipment For Bioenergy Available In Virginia
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 893 Professional Biodiesel Rancimat is an analysis system for easy and safe determination of the oxidation stability of biodiesel (fatty acid methyl ester, FAME) and biodiesel blends in accordance with EN 14112, EN 15751 and EN 16568 standards. With eight measuring positions in two heating blocks. The built-in display shows the status of the instrument and each individual measuring position. ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The 892 Professional Rancimat is an analysis system for the simple and safe determination of the oxidation stability of natural fats and oils with the well-established Rancimat method. With eight measuring positions in two heating blocks. The built-in display shows the status of the instrument and each individual measuring position. Start buttons for every measuring position enable the ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The InfraCal 2 Biodiesel Blend Analyzer for measuring percent biodiesel in diesel is the ideal solution where a quick, accurate, on-site measurement is required and a single, repetitive biodiesel blend analysis is needed. The InfraCal 2 ATR-B is based on proven IR technology, originally developed by Wilks, and used by fuel distributors, blenders, producers and regulatory agencies worldwide. The ...
-
Manufactured by Universal Biofuels Private Limitedbased in INDIA
Biodiesel, or fatty acid methyl ester, is a renewable chemical and fuel commonly produced from vegetable oil or animal fat. This non-petroleum based product can be used as diesel fuel, textile lubricant and industrial heating oil fuel. Biodiesel is an environmentally friendly and bio-degradable. Our biodiesel conforms to ASTM and EN ...
-
Manufactured by Beckettbased in USA
The Beckett models AF & AFG burner are designed to meet the increased demands of modern equipment and changing fuels to meet both performance and carbon reduction challenges. Beckett burners utilize the most technologically advanced components available today and are UL Listed up to 100% biodiesel (B100) and compliant with 100% renewable diesel (R100) to give consumers reliable performance ...
-
Manufactured by REA Resource Recovery Systems, LLCbased in USA
Our FOG-To-Biodiesel system helps municipalities and industrial operators address environmental-stewardship and decarbonization mandates that have become central to public policy and create a new revenue stream from what is currently a cost. By converting waste FOG to biodiesel, WWTP operators can sell production or utilize it to generate power. Municipalities can also utilize it to fuel their ...
-
Distributed by Ayalytical Instruments, Incbased in USA
Eliminate BIAS in Silver Corrosion Ratings. Methods: ASTM D4814, ASTM D7671, IP 611. From qualified practitioner to quintessential professional, designed with the end user in mind. Sensors in modern automotive fuel systems often use silver or silver alloys, which are susceptible to corrosion from sulfur in gasoline. In the past decade, refiners have shifted to producing lower-sulfur gasoline, but ...
-
Manufactured by Cannon Instrument Companybased in USA
The Tanaka apm-100 for CANNON is an automated Pensky-Martens Closed Cup flash point tester with built-in fire containment. Procedures are pre-programmed for homogeneous petroleum liquids, residual fuel oils and other non-homogeneous liquid and biodiesel. Conforms to test methods ASTM D93, JIS K 2265-3, ISO 2719, ISO 15267, and IP ...
-
Manufactured by Continental Refining Company (CRC), LLCbased in USA
If used for tax exempt purposes, fuel required to have enough Solvent Red 164 dye to be visually apparent. Must meet the standard of 3.9 lbs. Solvent Red 26 per thousand barrels product. Dyed Biodiesel contains Solvent Red (ASTM D6258H) minimum 0.1 mg/L and maximum 20 ...
-
Manufactured by Continental Refining Company (CRC), LLCbased in USA
If used for tax exempt purposes, fuel required to have enough Solvent Red 164 dye to be visually apparent. Must meet the standard of 3.9 lbs. Solvent Red 26 per thousand barrels product. Dyed Biodiesel contains Solvent Red (ASTM D6258H) minimum 0.1 mg/L and maximum 20 ...
-
Manufactured by Grabner Instruments - AMETEKbased in AUSTRIA
The flash point tester MINIFLASH FP Vision is uniquely designed to determine the flash points of liquids and solids. The analyzer uses Grabner flash point detection method, which is triggered by an energy-controlled electric arc and measures instantaneous pressure increase inside a closed chamber. By heating the test chamber from the top, the analyzer prevents condensation of high volatile ...
-
Manufactured by Grabner Instruments - AMETEKbased in AUSTRIA
The MINISCAN IR VISION is a high speed, compact and robust FTIR fuel analyzer for the comprehensive and automatic measurement of gasoline, jet and diesel fuels. The analyzer is configured to measure more than 100 fuel parameters and components for fuel blending, for quality inspection and to check compliance with fuel specifications directly at the point of ...
-
Manufactured by eralytics GmbHbased in AUSTRIA
ASTM D6450 was the first Continuously Closed Cup Flash Point (CCCFP) and uses 1 ml sample volume only. However, the obtained results didn’t compare well to the well-established ASTM D93 Pensky Martens method. Therefore a modified successor method was ...
-
based in USA
General Biodiesel’s Recycled Content Biodiesel exceeds ASTM quality standards.The EPA’s recently released RFS2 guidelines determined that biodiesel refined from used cooking oil is one of the lowest carbon fuels available with an 85% reduction in lifecycle CO2 emissions over conventional petroleum diesel. Recent studies by the California Air Resource Board, the Washington Department ...
-
Manufactured by Envantage Inc.based in USA
Envantage Biodiesel/FAME in Diesel Analyzer is a rugged, small footprint (2 foot by 2 foot) analyzer that utilizes mid-infrared spectroscopy to determine content of fatty acid methyl esters (FAME) biodiesel in diesel fuel per ASTM D7371. Calibration models have been developed, validated, and tested, and are built into the dedicated QA/QC PC-based software package included with the system. ...
-
Manufactured by Containment Solutions, Inc., (CSI)based in USA
The BTU, Biofuel Tank Upgrade, is a cost-effective solution for upgrading existing fiberglass single-wall and double-wall tanks to meet new regulations. Many of the earliest generation fiberglass tanks were not tested nor were they warranted for either biodiesel or ethanol blends exceeding 10%. Upgrade your tank to full compatibility with green fuel blends like E15, E85 up to ...
-
Manufactured by Continental Refining Company (CRC), LLCbased in USA
If used for tax exempt purposes, fuel required to have enough Solvent Red 164 dye to be visually apparent. Must meet the standard of 3.9 lbs. Solvent Red 26 per thousand barrels product. Dyed Biodiesel contains Solvent Red (ASTM D6258H) minimum 0.1 mg/L and maximum 20 ...
-
Manufactured by eralytics GmbHbased in AUSTRIA
ERASPEC is eralytics industry-proven multi-fuel analyzer with several thousand installations worldwide. It offers measurements of fuel component concentrations and of complex parameters like RON or cetane number for gasoline, diesel fuel, jet fuel and even specialized fuels like ethanol fuels. A single push of a button delivers all results in only 1 ...
-
Distributed by Ayalytical Instruments, Incbased in USA
Automation for Corrosion Determination. Methods: JIS K2510, ASTM D665, ASTM D7548, IP 135, ISO 7120, NACE TM-01-72. Corrosion on steel pipelines and tanks can lead to destructive leaks that can cost millions to fix and cause irreversible environmental damage.As a result, industries spend billions each year to slow down the natural process of corrosion. The National Association of Corrosion ...
-
based in USA
Quality Shield is an integrated tuning fork sensor that will directly and simultaneously measure the viscosity, density, dielectric constant, temperature of fuels. Relying on patented tuning fork technology, the sensor monitors the direct and dynamic relationship between multiple physical properties to determine the quality, condition and contaminant loading of fuels such as diesel biodiesel, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you