Biodiesel Cleaning Articles

  • Maintaining biodiese quality standards - Case study

    A problem that is sometimes encountered with biodiesel blends is inaccurate blend ratios. This article describes a quick analytical method to assess blend ratios and ensure fuel performance According 10 a study' done by the National Renewable Energy Laboratory, the chief problem found with biodiesel blends was inaccurate blend ratios. Retail customers and fleet managers do not typically worry ...


    By Spectro Scientific

  • DC Water Taps Into Biodiesel’s Sustainability Benefits

    Sustainability is more than a buzzword at DC Water. Ingrained throughout the agency, sustainability is in high gear at DC Water’s fleet division where biodiesel fuel powers all 230-diesel vehicles, and emissions are closely monitored. “Biodiesel just makes sense,” said Timothy Fitzgerald, Director Fleet Management for DC Water. “We switched to biodiesel in 2007 ...


    By National Biodiesel Board

  • Value stream mapping based on energy and cost system for biodiesel production

    Organisations have to give more attention to customer demands for survival and also for increasing their market shares. But customers' demands are not stable. The main problem of all organisations is how to cut costs during production process. The solution to this problem is built up with lean–based production systems. Value stream mapping identifies those areas where unwanted productivity is ...


    By Inderscience Publishers

  • Get comparable ASTM/EN data for biodiesel blend while saving time and money

    If you need to verity how much biodiesel is in a diesel fuel, sending a sample off to a laboratory can take several days to get an answer. This can add unnecessary delays if a truck has just been loaded for a delivery, but must wait for the lab result. The best solution is to have an on-site test where the fuel is loaded or delivered. The two most widely used analytical methods for measuring the ...


    By Spectro Scientific

  • Biofuels blend measurements with portable mid-infrared analyzers

    Globally, governments are putting more emphasis on sustainable energy sources and are creating energy policies that promote the production and use of biofuels. With the Renewable Fuels Standard-2 (RFS-2), the United States set biofuels blending volumes to 12.95 billion gallons (49.0 billion liters) for 2010, increasing to 36 billion gallons (136 billion liters) by 2022. With similar mandates or ...


    By Spectro Scientific

  • Maintaining biodiesel quality standards

    A problem that is sometimes encountered with biodiesel blends is inaccurate blend ratios. This article describes a quick analytical method to assess blend ratios and ensure fuel performance. According to a study1 done by the National Renewable Energy Laboratory, the chief problem found with biodiesel blends was inaccurate blend ratios. Retail customers and fleet managers do not typically worry ...


    By Spectro Scientific

  • Meeting the Challenges of Biodiesel Blend Measurements with Portable Mid-Infrared Analyzers - Case study

    In a published paper on biodiesel blend quality submitted by the National Renewable Energy Laboratory1, the chief problem found with biodiesel blends was inaccurate blend ratios. Retail customers and fleet managers do not typically worry about whether the blend ratio is correct until a problem occurs. For fleet managers, an incorrect blend can mean a total shutdown of operations. On the ...


    By Spectro Scientific

  • Putting the brakes on biodiesel

      Come December 31st, the Texas Commission on Environmental Quality (TCEQ) is set to effectively ban biodiesel in the state’s largest markets. The problem, they say, lies with the fuel’s nitrogen oxide (NOx) emissions and their contribution to the formation of ground-level ozone in Texas’ eastern counties. According to the TCEQ, biodiesel does not meet the stricter NOx standards recently ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you