Only show results in Virginia? Ok

Bioenergy Applications

  • Premium

    Compressed air, gas and vacuum solutions for biogas/biomethane

    Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Humid, corrosive and malodorous waste gases

    CTP's expertise with different coating systems, and an energy-saving pre-heater, protect the installation from corrosion even when waste gases are humid.

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Respirometry for the biofuels industry

    By Challenge Technology based in Springdale, ARKANSAS (USA).

  • Premium

    Evaporation technology for biogas and biofuels industries

    Combining industrial performance and sustainable development while remaining competitive requires that the biofuels and biogas industry ensure industrial process safety, reduce operational costs, implement solutions providing significant savings and comply with environmental regulations, which ultimately lead to the public’s acceptance of a site.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Premium

    Sensor for Biogas

    Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable nature of Methane (CH4), and the risk of asphyxiation, most plants feature ambient air monitoring to protect personnel from any unplanned accumulation of leaked gas. CH4 is the gas component fuel, which is the intended end product of the anaerobic digestion process. In biogas plants, the concentration of CH4 in a working plant varies between 50%-75%, which is well above the Upper Explosive Limit (UEL).

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high temperature without combustion with controlled amounts of oxygen (O) or steam. The composition of the base material combined with the amount of oxygen and heat used in the process affects the composition of the resultant SynGas, in which the CO can vary between around 20 and 60%. In addition, large amounts of H and CO are also formed. The measurement of CO is therefore an important feature in the production of SynGas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Biofuel Analyzing for the Bioenergy Industry

    AppliTek has already developed the necessary tools to measure and control on-line the production, in case the futur is in favour of biofuels. For biodiesel, the following quality indices should be monitored, on order to comply with international legislation on biofuel QC:

    Free fatty acids - Calcium & Magnesium - Total Phosphorus - Potassium - Moisture (water content)

    By AppliTek NV based in Nazareth, BELGIUM.

  • Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

    Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

    By STELA Laxhuber GmbH based in Massing, GERMANY.

  • Waste shredding for the biomass industry

    Companies engaged in biomass processing are increasingly adopting stationary pre-shredder technology to increase the delivery of consistent, specific carbon-neutral biomass energy products. This selected fuel is attractive to operators of incineration facilities who are keen to reduce their overall carbon emissions.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Industrial filtration & separation solutions for the biodiesel production industry

    Biodiesel Production.

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA).

  • Agitators for Biogas Blants

    Use the SUMA agitators to prevent the formation of floating and sinking substrate layers. Furthermore they ensure that the substrate maintains an equal temperature throughout. The homogeneously distribution of nutrients for the biological process enables more efficient gas flow out of the substrate.

    By SUMA Rührtechnik GmbH based in Sulzberg, GERMANY.

  • Dynamic Settlers for Harvesting Algae

    We are proud to let you know that with the Evodos Dynamic Settlers our customers achieve excellent results in harvesting algae. Today we have over 70 customers worldwide in the algae market. With Evodos, even the smallest algae (Nannochloropsis), fragile algae (Dunaliella and Diatoms) and both fresh and marine water algae are harvested successfully.

    By Evodos B.V. based in Raamsdonksveer, NETHERLANDS.

  • Biomass Burning

    Superior Boilers can be found burning digester methane gas, hydrogen, tallow (animal fats), biodiesel, sanderdust and recovering heat from biomass systems. In addition, Superior Boiler Works, Inc. has partnered with the biomass experts AESI located in Wichita, KS USA. AESI offers turnkey expertly designed biomass sytems and offers burn tests for a diverse array of materials

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Production of Biofuels from Microalgae

    Production of biofuels from certain microalgae and cyanobacteria would appear to be the most promising alternative to current methods, since its yield is very high, sustainable, uses either wastewater, brackish or seawater, does not require the use of agricultural land, does not compete with human food and the cultivation process consumes the CO2noxious gas.

    ALGAENERGY is responsibly paving the way towards making microalgal-based biofuels industrially profitable.  The R&D projects assigned to this task include work on selection and genetic engineering of different microalgae to produce substantial lipid-carriers, some of them patented, as well as the establishment of a suitable and scalable production process.

    By AlgaEnergy, S.A. based in Alcobendas, SPAIN.

  • Agitation and mixing solutions for ethanol / bio diesel

    Ethanol can be produced from a variety of raw materials such as corn, sugar cane, soy beans, switchgrass, corn stover, and cellulosic materials.   Corn can be processed in a dry or wet mill to produce ethanol.  Advances and research in ethanol continues to find new and more energy efficient ways to produce ethanol and biofuels and new raw materials for production.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Biogas Production Optimization

    By Dewaco Ltd based in LAITILA, FINLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you