Only show results in Michigan? Ok

Biogas Flaring equipment for Bioenergy

  • Premium

    AirScience - Biogas Flares

    Anaerobic Digester (AD) biogas applications; For AD biogas applications enclosed flame flares are used to burn excess biogas from the process as well as to burn the full biogas production while the downstream biogas valorization system is stopped for maintenance or emergency conditions. The exhaust gas emissions meet the most stringent North ...

    By AirScience Technologies Inc. based in Montreal, QUEBEC (CANADA). from Flares Product line

  • Premium

    Shand & Jurs Biogas - Model 97300M - Waste Gas Burner

    The Shand & Jurs Biogas 97300M is a low cost, basic, Waste Gas Burner designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Waste Gas Burners and Flares Product line

  • Premium

    Shand & Jurs Biogas - Model 97311T - Enclosed Burner with Touch Screen Control Panel

    Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97311T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97311T Enclosed Flare incinerates harmful emissions from waste gas streams. ...

  • Premium

    Shand & Jurs Biogas - Model 97310T - Enclosed Burner with Touch Screen Control Panel

    Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97310T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97310T Enclosed Burner removes harmful emissions from waste gas streams. ...

  • 2Master - Gas Holder

    The constant pressure gasholders are designed to store the biogas made from the anaerobic digestion of the organic waste, sludge and from the landfill sites. The 2MASTER gasholders are made with an external upper membrane, pressurized by an air fan 24 hours a day to give a pneumatic push on the inner biogas chamber, keeping the biogas chamber at a ...

    By Biogasmart based in Gadesco Pieve Delmona, ITALY. from Storage Product line

  • Biogasmart - Model HTS - High Temperature Flare Stack

    HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a controlled environment.

    By Biogasmart based in Gadesco Pieve Delmona, ITALY. from Combustion Product line

  • Biogasmart - Model ST - Elevated Biogas Flare Stack

    The T flare is a self-supported elevated flare (open type) complete with a safety ladder and an upper platform that allow access to the nozzle and ignition and flame control equipment. The flame shield is designed to prevent accidental flame extinguishing and provides a chamber lined with fiberceramic for more complete biogas combustion.

    By Biogasmart based in Gadesco Pieve Delmona, ITALY. from Combustion Product line

  • Biogasmart - Model HE-Type - High Efficiency Biogas Flare Stack

    HE-Type is an enclosed ground flare; combustion takes place within a cylindrical chamber lined with fiberceramic and this causes a higher destruction efficiency of the biogas in comparison to open flares. Enclosed combustion also makes flame and noise less perceptible and for this reason these flares are normally selected for installation in ...

    By Biogasmart based in Gadesco Pieve Delmona, ITALY. from Combustion Product line

  • BIODOME - Biogas Storage and Handling System

    Stortec’s experienced biogas team has been at the forefront of water and waste engineering innovation for more than 30 years. BIODOME’s successful solutions have provided specialist answers to the unique challenges of Biogas handling, storage and utilisation for organisations all over the world. Providing trusted service and asset ...

    By Stortec Engineering Ltd based in Clitheroe, UNITED KINGDOM.

  • Biogas - Model Lo-Cal - High Temperature (HT) Flares

    The innovative Lo-Cal HT flare is designed to provide greater gas control during the latter phases of a landfill site, or gas with a low methane concentration. The Lo-Cal HT flare has enabled LFG migration and odour control on landfill sites where conventional plant and equipment has failed. High temperature combustion of gas with low methane ...

    By Biogas Systems based in Norwood, AUSTRALIA.

  • PBS - Model Flare NTF - Residual Gas Burner

    The PBS POWER EQUIPMENT, s.r.o. manufactures, installs and services atmospheric NTF type Flares used for combustion of residual biogas (resp. other combustible gas) mainly in cases of emergency stops of main consumers (cogeneration units).

    By PBS POWER EQUIPMENT, s.r.o. based in Trebíc, CZECH REPUBLIC. from Other Products Product line

  • Elevated Biogas Flares

    Flare for a capacatiy from 50 Nm3/h to 6.000 Nm3/h. Minimum methane concentration as low as 45% without pilot gas. No pilot gas needed.Low pressure, flow direct from reactor, no blower needed. Weather proof ignition system. 10 years waranty on body. 2 years on electronics and ignition system at normal use.

    By DWS BVBA based in Wijnegem, BELGIUM. from Biogas Flares Product line

  • Temperature Control Ground Flares

    Flare for a capacatiy from 50 Nm3/h to 2000 Nm3/h. Temperature controled combustion to fulfill the CDM requirements. Minimum methane concentration as low as 20%, also for landfill. Pilot gas on biogas. Low pressure, flow direct from reactor, no blower needed. Weather proof ignition system. 10 years waranty on body. 2 years on electronics and ...

    By DWS BVBA based in Wijnegem, BELGIUM. from Biogas Flares Product line

  • Biogas Flares

    Utilising waste gas in process heating or power generation (gas engine) is a preferred method of disposal, but sometimes it is impractical due to distance from a suitable site. Flaring gas is the best alternative in this situation. A temporary flare may also be required for co-generation standby systems and during landfill construction.

    By Windsor Engineering based in Porirua, NEW ZEALAND. from Industrial - Combustion Product line

  • Model FA II - Closed-combustion Automatic Biogas Flare

    The FAII biogas flare is an automatic, enclosed gas flare for combustion of biogas and other combustible gases, fully complying with the widely applied German air pollution regulation TA Luft.+500 references in more than 50 countries witness the robustness of our FAII flares!Available in a rage of 20 - 3.000 Nm3/h, at various pressures.Highly ...

    By Bilgeri EnvironTec GmbH based in Nüziders, AUSTRIA. from Biogas Flares Product line

  • Model FA I - Manual / Automatic Open-Combustion Biogas Flare

    The FAI is an open-combustion flare, which can be configured in manual ignition as standard. Optionally, the FAI can be updated to Automatic mode, before or after* purchasing. That makes the New FAI the best and most cost-effective option for locations where no automatic flare is mandatory and open combustion is allowed!Available up to 500 Nm3/h, ...

    By Bilgeri EnvironTec GmbH based in Nüziders, AUSTRIA. from Biogas Flares Product line

  • Model HT - High Temperature Gas Flare

    The HT series flares are designed to offer a combustion temperature above 1000 °C and residency time longer than 0,3 s. This is to comply with the widely-applied German norm TA-Luft, in those case in which the flare is not just an emergency element, as well as in case of landfills and other complex and special gases.The HT features heat-resistant ...

    By Bilgeri EnvironTec GmbH based in Nüziders, AUSTRIA. from Biogas Flares Product line

  • ennox - Model ECO - Manual Gas Flare

    THE robust and maintenance free flare suitable for small biogas systems, special installations or when an automatic gas flare is not specified. The ECO flare is manufactured entirely from stainless steel and equipped with high quality components (i.e., ATEX certified flashback prevention, DVGW certified manual flap...).

    By ennox biogas technology GmbH based in Hard, AUSTRIA. from Gas Flares - Usage Product line

  • Hofstetter - Biogas Plant

    Biogas, after proper treatment, can be converted into electricity and upgraded to biomethane. Biogas technology is the conversion of organic substances to methane as fuel and valuable fertilizer from available resources that otherwise would go unused.

    By Hofstetter Gastechnik AG based in Hindelbank, SWITZERLAND.

  • Biogas Flares / Sludge Gas Flares

    The LAMBDA biogas and sludge gas flare serves as an inspection and safety device at biogas and sludge gas plants for the thermal treatment of excess gas. Since the continuous process of gas production in these plants can only be influenced to a slight extent in the event of a failure of the utilisation plant, the LAMBDA flare safely disposes of ...

    By LAMBDA Gesellschaft für Gastechnik mbH based in Herten, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you