We couldn't find any biogas flaring equipment suppliers or service providers located in Michigan
Here is a list of equipment results with suppliers serving Michigan
Biogas Flaring Equipment For Bioenergy Available In Michigan
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The GV2 by Continental Controls Corporation is an electronic fuel control valve designed specifically for small to midsized gas engines. It offers advanced electronic fuel control to allow fuel flow ranges that include LHV/Low BTU flare gas, biogas, and landfill gas. The GV2 features a servo-coil actuator, making it fast and smooth acting with low maintenance and high MTBF. It also offers ...
-
based in UNITED KINGDOM
This range of simple elevated flares is typically used for short term applications (such as gas pumping trials) or those where exhaust gas emissions are not subject to regulation. The combustion process is visible and the combustion temperature is not ...
-
Manufactured by BD Environmental Solutionsbased in USA
High gas flows and difficult access to digesters may cause a need for a deviation from the standard design of biogas flares, which are used to dispose of waste streams coming from landfills, biogas, biomass and wastewater facilities. Enclosed flares are designed to maintain a high destruction ratio within the vertical combustion chamber and a stable combustion necessary for destruction of ...
-
Manufactured by Hofstetter BVbased in NETHERLANDS
Customised HOFGAS-IFL4c biogas gas flaring system is deployed when express regulations on gas emission must be observed. Because of no visible flame, erection of the gas flare is most advantageous even near residential areas. The system is simple to operate and adjust, and starts reliably. The high temperature flare for biogas comes with the latest safety ...
-
based in USA
SOLVING COMPLEX PROBLEMS for global industries is nothing new for John Zink Hamworthy Combustion. Over the years, we’ve led the advancement of flare design and clean flare technologies for upstream, downstream, and biogas flare industries, transforming yesterday’s fired equipment into sophisticated, low-emissions ...
-
Manufactured by Conveco Srlbased in ITALY
Open flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation. The EMR flares family includes units for biogas flows from 10 to 250 Nm3/hr and is characterized by compact dimensions, simplified design, ease of installation. The ST version is an elevated flare and is suitable where the flame outlet must be kept at ...
-
Manufactured by Hero Flare LLCbased in USA
The HERO Low Flow Flare is specifically designed for low flow flare applications, or for those sites located in remote locations and do not have access to electric or pilot fuel gas. The most common application is flaring off low pressure tank vapors and remote ...
-
Manufactured by Flare and Vapor Systems Corpbased in USA
FAV Systems Inc. Has designed and tested the FAV Systems ESD Knockout Drum Combination to prevent the flooding of flare stacks and tanks, which costs many dollars to clean up, and may cause environmental mishaps, grass or crop ...
-
Manufactured by Lone Star Blower, Inc.based in USA
Lone Star specializes in engineering, manufacturing and testing of standard and custom blower systems for any pressure, vacuum, air or gas ...
-
Manufactured by Wuxi Teneng Power Machinery Co., Ltd.based in CHINA
Biomass Storage. Biomass Conveyor.Biomass Gasifier. Cyclone Dust Collector. Air Cooler. Gas Cooler. ESP. Gas Cooler. Gas Dryer . Buffer Tank. Gas Flare. Gas Generator Sets. ...
-
Manufactured by Varec Biogas - Ovivo Incbased in USA
The Varec Biogas 249 Series Enclosed Flare is a flare specifically designed for biogas application. It is primarily used in areas where flare stack emissions are controlled and regulated. The sophisticated design of the 249 Series is a top-of-the-line, full-featured, drop-ship product, where all eventualities have been carefully considered at the design phase. After the product is shipped, our ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the biogas and wastewater industries. Additionally, each ...
-
based in UNITED KINGDOM
The LD range of flares is used for biogas de-gassing applications, typically used with anaerobic digestion plant, synthetic (pyrolysis) gas plant and for landfill gas environmental control. The extracted gas is burnt in an enclosed flare stack in a controlled combustion process which, when required, ensures compliance with the UK Environment Agency exhaust gas emissions limits. Turndown ratios of ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
The Biobulk CSTR technology (Completely Stirred Tank Reactor) is a robust and proven process which treats industrial effluents with significantly high amounts of suspended solids. It is the anaerobic equivalent to the conventional activated sludge digestion ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
BF-3000 Ultrasonic Biogas Flowmeter can be commonly used with various industrial gas streams(biogas, natural gas, air, etc.), but with special design to enable it withstand the wet and corrosive gas conditions in biogas application. The built-in temperature and pressure sensors enable to make real time compensation and reach higher accuracy. The unique CH4 composition reading function requires no ...
-
Manufactured by Conveco Srlbased in ITALY
The T flare is a self-supported elevated flare (open type) complete with a safety ladder and an upper platform that allow access to the nozzle and ignition and flame control equipment. The flame shield is designed to prevent accidental flame extinguishing and provides a chamber lined with fiberceramic for more complete biogas combustion. The flare stack is designed as package unit and is ...
-
Manufactured by Conveco Srlbased in ITALY
Enclosed flares HE and HTE type burn biogas in a cylindric enclosure fitted with a high-resistance fiberceramic insulation lining which ensures high combustion efficiency and limitation of both rumbling and radiation. Design of the burner and of the combustion chamber as well as the selection of construction material and ancillary equipment make these flares suitable for installation in projects ...
-
Manufactured by Prodevalbased in FRANCE
Biométhane-Box process is an economical BioCNG production and distribution unit intended to biogas producers (agricultural, industrial or territorial anaerobic digestions). The unit values in situ or locally the production overage intended to cogeneration, allowing a captive vehicle fleet alimentation (light vehicles, agricultural machines…) in substitution to fossil fuel. The ...
-
Manufactured by International Combustion Equipment Srl (I.C.E.)based in ITALY
ICE’s flare packages provide a broad broad range of elevated and ground ares, with the most common ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
The HT series flares are designed to offer a combustion temperature above 1000 °C and residency time longer than 0,3 s. This is to comply with the widely-applied German norm TA-Luft, in those case in which the flare is not just an emergency element, as well as in case of landfills and other complex and special gases. The HT features heat-resistant ceramic insulation, automatic air intake ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you