Biogas Flowmeter Equipment For Bioenergy In Asia & Middle East
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
-
Manufactured by Agastya Invention Pvt Ltdbased in INDIA
Double Membrane Standalone Biogas Balloon is one of the most prominent and premium products of Agastya. We are an eminent biogas storage balloons manufacturer who makes balloons with the renowned PVC – Coated Fabric and a state-of-art technic that provides an efficient biogas storage balloon. The 3/4th hemispheric design is the most common and traditionally used storage solution for ...
-
Manufactured by Biogasclean A/Sbased in DENMARK
The system with tanks built on-site is used at ethanol distilleries and paper mills. Each gas cleaner is designed to the project specific biogas flow and H2S load and comprise the following 3 main systems: The PTU - Process Technique Unit - is the machine room and contains circulation pumps, air blowers, PLC controller board, etc., installed in a in a customized FRP housing or modified shipping ...
-
Manufactured by Biogasclean A/Sbased in DENMARK
The popular choice. This type is for smaller and larger H2S loads. We manufacture fiberglass tanks in several countries to reduce transportation costs. The PTU – the Process Technique Unit - is the machine room and contains PLC controller board, circulation pump, air blower, valves, flow meters, gas detector system and – if required – also heating system installed in a custom ...
-
Manufactured by Burak Metering Pvt Ltdbased in INDIA
Burak’s BA-Series thermal mass meter works on the thermal dispersion method and uses constant measuring technology. It operates by observing the cooling effect over a heated transducer due to the passage of gas molecules through a closed conduit pipe. Mass flow meter consists of two sensors one is a temperature sensor and the other is a heater sensor. The temperature sensor monitors the ...
-
Manufactured by Biogasclean A/Sbased in DENMARK
For high H2S loads. This type is for large H2S loads at a.o. ethanol distilleries and paper mills. The diameter of the tank is so big that it is not possible to transport from a workshop; therefore the tank is manufactured on site. The PTU – the Process Technique Unit - is the machine room and contains PLC controller board, circulation pump, air blower, valves, flow meters, gas detector ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
BF-3000 Ultrasonic Biogas Flowmeter can be commonly used with various industrial gas streams(biogas, natural gas, air, etc.), but with special design to enable it withstand the wet and corrosive gas conditions in biogas application. The built-in temperature and pressure sensors enable to make real time compensation and reach higher accuracy. The unique CH4 composition reading function requires no ...
-
Manufactured by Jog Waste to Energy Pvt. Ltdbased in INDIA
For the production of high-value Biomethane or BioCNG and clean gas vehicle fuel. Jog Waste To Energy Pvt ltd manufacturer’s biogas upgrading system, biogas purifier, biogas purification plant and biogas upgrading equipment. It runs the production from raw biogas produced from, multiple wastes like municipal waste, sugar crane press mud, cattle dung, vegetables, food waste. There are many ...
-
Manufactured by Jog Waste to Energy Pvt. Ltdbased in INDIA
If you need to move Biogas slurry at a constant rate, the answer could be to use a positive displacement pump. This type of equipment is able to handle viscous Biogas fluids more efficiently than some other types of pump. The Progressing Cavity Pump can also deal with high dry matter content media (up to 10-12 %). With conventional rotary piston pumps this would not be possible (max. 9 % dry ...
-
Manufactured by Process Control Devicesbased in INDIA
The production of biogas is a key part of any operation in most of industrial, commercial and public sector. It is necessary to measure the flow of biogas to ensure facility efficiency using bio gas flow meter. Flow measurement helps operators to know how much biogas deliveries to the gas grid. Measuring technologies associated with biogas applications are challenging. Various technologies are ...
-
based in THAILAND
Biogas is coming out of the anaerobic digesters saturated with water vapor. At the usual digester temperature of mesophilic anaerobic digesters of around 30°C, this means that the biogas contains about 5% water, or about 50 g/Nm³ biogas. If the temperature of the biogas subsequently drops, some of that water will condense into a ...
-
based in THAILAND
All anaerobic plants must be equipped with a biogas flare, for safety reasons. GWE flares are designed to operate at low to medium pressure (<50 mbar), without the need for a biogas fan and for continuous burning in a wide range of biogas flows (5-100 %). This avoids the need for biogas storage systems (e.g. balloons) and keeps the biogas pressure in the reactor more or less ...
-
Manufactured by Biorem Technologies Inc.based in CANADA
Biogas emissions provide a valuable potential source of recoverable energy. However the presence of hydrogen sulfide (H2S) in biogas can restrict its use as it will adversely impact downstream equipment and cause SOx emissions in thermal combustion of the gas. In addition, the presence of H2S can lead to issues with health and safety as well as cause a potential off-site nuisance condition for ...
-
Manufactured by Binder Group GmbHbased in GERMANY
Modern biogas fermentation plants cannot meet commercial and environmental requirements without appropriate measuring and analysis technique. For the economical operation of the fermentation plant it is likewise necessary to consider the gas composition and quantity of the individual digester stages. Therefore usually a biogas flow measurement is installed in the CHP room. Errors by varying gas ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
BF-3000B Ultrasonic Biogas Flowmeter is based on technology combination of pressure differential and ultrasonic transit time differential measurement method. With a bypass structure in the flow meter, gas flow in the main line is inferred by measuring the gas flow in the small bypass line, it can effectively solve the problems such as moisture condensation and core parts corrosion, improve the ...
-
Manufactured by Biogasclean A/Sbased in DENMARK
Most affordable; the costs are kept down as the tank is without grating and not designed for being filled with water and the control center is skid mounted. The PTU – the Process Technique Unit - is the control center with PLC controller board, circulation pump, air blower, valves, flow meters and - if required – also heating system installed on a skid. The scrubber tank is ...
-
Manufactured by Agastya Invention Pvt Ltdbased in INDIA
The 3/4th hemispheric design is the most common and traditionally used storage solution for high-pressure gas storage. It has a double membrane design – the outer membrane gives shape to the gasholder while the inner and floor membrane forms the actual storage space for biogas. A continuous flow of slightly over-pressured air is supplied to the space between the inner and outer ...
-
Manufactured by Inclusive Energy Ltdbased in INDIA
Smart Biogas is a real-time monitoring system for biogas digesters. Providing greater transparency and performance for the biogas sector through intelligent and interactive monitoring, sensing and communications. Smart Biogas enables performance insights, asset management, pay as you go, and more accurate Carbon Credit reporting. Smart Biogas is designed to monitor a large number of biogas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you