Only show results available in Michigan? Ok

Biogas Mixing equipment for Bioenergy

  • Model RW 1031 - Biogas Agitator

    This biogas agitator was developed for use in fermenters, secondary fermenters and combination storage tanks. Due to v-belt drive the noise development could be reduced. The multi-part driveshaft allows that most of the maintenance work can be carried out from the outside.

    By Lothar Becker Agrartechnik GmbH based in Seesen, GERMANY. from Motor Agitators Product line

  • Model 222-350 RPM - High Performance Mixers

    The OMPG is a sturdy agitator suitable for major mixing applications in sludge tanks with relatively high dry matter content. The agitator is extremely efficient for mixing and homogenizing deposits in equalization tanks. For such applications and for applications including periodical homogenizing the OMPG is exceptional, e.g. in inlet tanks or at ...

    By LJM Lind Jensens Maskinfabrik based in Højmark, DENMARK. from Industrial Product line

  • Model BG 500 Series - Biogas Mixers

    Similar to BG 80 series, it differs from it mainly for 2 aspects: this mixer can be equipped with electric motor complete with toothed belt or with a 500 RPM hydraulic motor; the drive line is tied up to frame with hydraulic pistons through a double joint which allow both vertical and horizontal movements;

    By Doda Costruzione Macchine Agricole snc based in Buscoldo, Mantova, ITALY. from Biogas Mixers Product line

  • Grundfos - Standard Biogas Submersible Mixers

    The standard biogas-submersible mixers are especially developed for use in Biogas plants. The mixers have a casted cable entry and a special micro-consistent cable in order to resist the aggressive conditions. There are two versions with only 200 RPM to minimize the abrasion of the propeller and to increase the specific axial thrust.

    By Grundfos Arnold AG based in Schachen, SWITZERLAND.

  • Model Compact Plus - Biogas Plant

    The Compact Plus biogas plant has a unique design; compact, flexible, robust and simple.With the Compact Plus biogas plant, you are capable of processing the widest range of biomasses. Both liquid and solid. To ensure a good financial result – now and in the future – it is important that you are not dependent on only a limited range of ...

    By Biogas Plus BV based in Deurne, NETHERLANDS.

  • Giantmix - Model AMX - Long-axis Biogas Agitator

    Long-axis agitator Giantmix AMX for higher dry matter contents. The new Giantmix AMX was especially developed for biogas and industry plants with higher dry matter content up to 16 %.

    By SUMA Rührtechnik GmbH based in Sulzberg, GERMANY. from Agitators Industry Product line

  • GasMix - Biogas Reactor Tanks

    GasMix is a unique and innovative system for mixing of media in the biogas reactor tanks. It produces a strong stirring effect both vertical and horizontal in the media and therefore achieves optimum homogenization.

    By CombiGas based in Give, DENMARK.

  • Model Bio-Mix - Vertical Mixers

    The Strautmann vertical mixer models offer optimum characteristics for charging biogas plants. The simple and quick mixing procedure of the vertical mixer, the accurate dosing and the low maintenance required emphasise the excellent price-performance ratio. A multitude of different model sizes are available for all needs, offering a wide range of ...

    By B. Strautmann & Söhne GmbH u. Co. KG based in Bad Laer, GERMANY. from Stationary Mixing Technology Product line

  • Biogas Compressors

    Claro high efficiency all-stainless-steel liquid ring compressors are quiet, proven low-maintenance, and delivered on a skid complete with all biogas safety components for quick and easy connection. Due to the absence of wearing parts such as pistons and sliding vanes, liquid ring compressors are known for their simplicity of design and low ...

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Anaerobic Digestion Product line

  • OMPG - Model R 160 - Biogas Plant Submersible Mixers

    The LJM Mixer type OMPG R 160 for Biogas plants is a heavy duty mixer in superior quality that ensures you a problem free biogas production. OMPG R160 is supplied with AISI 316ti mounting brackets and a type C motor console with rollers for the easy guidance on the mast.

    By LJM Lind Jensens Maskinfabrik based in Højmark, DENMARK. from Biogas Product line

  • Model BG 80 Series - Biogas Mixers

    The BG 80 series Biogas Mixer is completely made of stainless steel and is supplied with an oil bath drive line. This  is equipped with a 3 blades propeller with an optimized profile which allows a great mixing power. This machine is set in motion by  an electrical motor with a reduction gear. The propeller rotation is about   ...

    By Doda Costruzione Macchine Agricole snc based in Buscoldo, Mantova, ITALY. from Biogas Mixers Product line

  • Fermento - Model FER - Rod Mixer

    This rod mixer is renowned for its ease of dismounting and remounting for maintenance. It is offered with motor ratings from 7.5 kW to 22 kW. Installation is through a mounting frame embedded in the concrete wall. It can be installed quite easily in existing digesters.

    By Maschinenbau Peters GmbH based in Eupen, BELGIUM. from Biogas Product line

  • Biogas Plant Mixer

    We offer complete dosing systems for biogas plants from one source. Solid substrates such as whole plant silage, grass silage, solid manure and poultry droppings are stockpiled, processed and fed into in the fermenter in solid form below the liquid level. A biomixer combined with our biomass screws allows for the uniform feed of a biogas ...

    By Konrad Pumpe GmbH based in Sendenhorst, GERMANY. from Biogas Technology Product line

  • Tecon - Top-Mounted Biogas Storage Systems

    The tank mounted TECON Double Membrane Gas Storage System consists essentially of an outer membrane, an inner membrane and an optional brace system with a center pole. The actual gas storage function is done by the inner membrane, which in conjunction with the supporting air blower, provides a constant operating pressure. The operating pressure is ...

    By Tecon – textile constructions GmbH based in Ilz, AUSTRIA. from Gas Holders Product line

  • LJM - Model Type OMPG R 160 - Biogas Plant Submersible Mixer

    The LJM Mixer type OMPG R 160 for Biogas plants is a heavy duty mixer in superior quality that ensures you a problem free biogas production.

    By LJM Lind Jensens Maskinfabrik based in Højmark, DENMARK. from Biogas Product line

  • Zorg - Biogas Reactor Inclined Mixer

    Inclined mixers are specially designed to work in the aggressive environment of biogas reactors. Mixer propellers are manufactured with the help of special tools that ensure millimetre angle accuracy blade after blade.

    By Zorg Biogas AG based in Zurich, SWITZERLAND.

  • Stamo - Side Mounted Agitator

    Stamo’s side mounted agitators are particularly useful when the tank’s design only allows access from the side. The side mounted agitators are also used to establish extra powerful agitation in the bottom area of the tank when it is needed.

    By Stamo Maskin AB based in Västerås, SWEDEN. from Biogas Product line

  • Standard / ATEX - Three Blade Propeller Agitator

    Since 20 years ago 'AT-MIX' only with two blade now with even more efficient three blade propeller. Rapid homogenization of manure and biogas substrate. Noise and maintenance friendly

    By Lothar Becker Agrartechnik GmbH based in Seesen, GERMANY. from Agitators for Biogas Product line

  • QuickMix - Model II - Biogas Plants Turbocharger

    A uniform mixture of solid and liquid input materials and the avoidance of clumping are important preconditions for optimal fermentation. To do this, Vogelsang has combined two tried-and-tested components in the QuickMix II: the Vogelsang rotary lobe pump and the twin-shaft auger. The compact unit combines the advantages of both components making ...

    By Vogelsang USA based in Canby, OHIO (USA). from Reliable Digester Feeding Product line

  • Stamo - Top Mounted Agitators

    Stamo’s top mounted agitators are individually designed and manufactured to meet the customer’s process requirements. A wide range of configuration alternatives cover all types of agitator needs.

    By Stamo Maskin AB based in Västerås, SWEDEN. from Biogas Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you