Biogas Mixing Equipment For Bioenergy Available In Connecticut
-
Manufactured by Suma Rührtechnik GmbHbased in GERMANY
Top-mounted energy-efficient agitator for high dry matter content. The FTX shaft agitator for installation on the tank top can be used for dry matter contents of up to 15 %. Substrates with a high solids content can be stirred without any problems due to the high thrust of 6.5 ...
-
Manufactured by DODA Costruzione Macchine Agricolebased in ITALY
The BG 80 series Biogas Mixer is completely made of stainless steel and is supplied with an oil bath drive line. This is equipped with a 3 blades propeller with an optimized profile which allows a great mixing power. This machine is set in motion by an electrical motor with a reduction gear. The propeller rotation is about 80 RPM. The mixer can have roof or wall frame mounting. Their mixing ...
-
Manufactured by Process Engineering Srlbased in ITALY
The 'Bio-Gas Production & Mixing System by PE' is applied in the Primary and Secondary Digestion with the aim to produce Bio-Gas through the Anaerobic Digestion of the Sludge. Thanks to its properties, the Bio-Gas System by PE' performs: a continuous & controlled mixing of sludge, the uniformity of the digestion process inside the digesters, the uniformity of the temperature (T) of the ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
The FAII biogas flare is an automatic, enclosed gas flare for combustion of biogas and other combustible gases, fully complying with the widely applied German air pollution regulation TA Luft. +500 references in more than 50 countries witness the robustness of our FAII flares! Available in a rage of 20 - 3.000 Nm3/h, at various pressures. Highly customizable for very particular project ...
-
Manufactured by Biogas Hochreiter GmbHbased in GERMANY
The paddle agitator is designed for fermenting containers or repositories with changing liquid levels. The large paddle, with its four-meter span, enables powerful and effective agitation. Because of this stirring power, the fermenter can also be agitated with fixed paddles. The agitator with float is mainly installed in ...
-
Manufactured by Biogas Hochreiter GmbHbased in GERMANY
The also patented "standing Steinauer agitator" is designed for smaller containers and containers with changing liquid levels. The large paddle stirs the fermentation substrate on a horizontal plane. Since the paddles are “twisted”, swirling is produced that mixes the substrate vertically. This agitator is also operated by means of a frequency transformer to reduce power consumption. ...
-
Manufactured by streisal GmbHbased in GERMANY
Slow-running large-propeller agitators of the Biobull® type enable large quantities of fluid to be circulated in tanks with largely constant fill levels. They are used above all in biogas generation and in other applications with difficult substrates (fibrous constituents, maximum dry matter contents, etc.). The maximum medium temperature is 60 °C. By means of an external agitator column, ...
-
Distributed by BIOFermâ„¢ Energy Systemsbased in USA
Biomethane gas is an attractive alternative to fossil fuels. Its production is environmentally responsible, efficient and renewable. It can be mixed with natural gas and injected into the conventional gas pipeline. Supplies of fossil fuels such as coal, crude oil and natural gas are getting shorter all the time – effects of this phenomenon can already be seen in ever increasing energy ...
-
Manufactured by Biogas Hochreiter GmbHbased in GERMANY
This slowly rotating paddle agitator for fermenters of 16 meters diameter and 5 metres deep can deal with practically any input material, no matter what the substrate or diameter. Practical tests demonstrate that even fermentation substrates with a dry matter content of 12 percent are reliably mixed. Thanks to the enormous diameter and low speed, agitating power and energy consumption are kept in ...
-
Manufactured by streisal GmbHbased in GERMANY
High and adjustable stirring performance Great hydraulic thrust which can be adapted to the biological condition of the substrate / mixing task by means of a height adjustment. Unhindered substrate inflow. no shadowing effect from interfering fixtures. The large diamter of the propeller hub and -blade virtually eliminates the build-up of layers in this critical area. ...
-
Manufactured by DODA Costruzione Macchine Agricolebased in ITALY
Similar to BG 80 series, it differs from it mainly for 2 aspects: this mixer can be equipped with electric motor complete with toothed belt or with a 500 RPM hydraulic motor; the drive line is tied up to frame with hydraulic pistons through a double joint which allow both vertical and horizontal ...
-
Manufactured by Landia a/sbased in DENMARK
Landia GasMix is a mixing system that is suitable for all types of digestion tanks and reactor tanks. All mechanical components on GasMix are located outside the tank. Therefore, it is not necessary to open or empty the tank when performing service or repairs on the GasMix system. In addition to the safety aspects, the system also offers financial benefits as biogas production can continue while ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you