Biogas Mixing Equipment For Bioenergy In Europe
-
Manufactured by Biogas Hochreiter GmbHbased in GERMANY
The paddle agitator is designed for fermenting containers or repositories with changing liquid levels. The large paddle, with its four-meter span, enables powerful and effective agitation. Because of this stirring power, the fermenter can also be agitated with fixed paddles. The agitator with float is mainly installed in ...
-
Manufactured by Maschinenbau Peters GmbHbased in BELGIUM
This rod mixer is renowned for its ease of dismounting and remounting for maintenance. It is offered with motor ratings from 7.5 kW to 22 kW. Installation is through a mounting frame embedded in the concrete wall. It can be installed quite easily in existing ...
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
The LJM Mixer type OMPG R 160 for Biogas plants is a heavy duty mixer in superior quality that ensures you a problem free biogas ...
-
Manufactured by Biogas Hochreiter GmbHbased in GERMANY
The also patented "standing Steinauer agitator" is designed for smaller containers and containers with changing liquid levels. The large paddle stirs the fermentation substrate on a horizontal plane. Since the paddles are “twisted”, swirling is produced that mixes the substrate vertically. This agitator is also operated by means of a frequency transformer to reduce power consumption. ...
-
Manufactured by streisal GmbHbased in GERMANY
Slow-running large-propeller agitators of the Biobull® type enable large quantities of fluid to be circulated in tanks with largely constant fill levels. They are used above all in biogas generation and in other applications with difficult substrates (fibrous constituents, maximum dry matter contents, etc.). The maximum medium temperature is 60 °C. By means of an external agitator column, ...
-
Manufactured by DODA Costruzione Macchine Agricolebased in ITALY
The BG 80 series Biogas Mixer is completely made of stainless steel and is supplied with an oil bath drive line. This is equipped with a 3 blades propeller with an optimized profile which allows a great mixing power. This machine is set in motion by an electrical motor with a reduction gear. The propeller rotation is about 80 RPM. The mixer can have roof or wall frame mounting. Their mixing ...
-
Manufactured by Bilgeri EnvironTec GmbHbased in AUSTRIA
The FAII biogas flare is an automatic, enclosed gas flare for combustion of biogas and other combustible gases, fully complying with the widely applied German air pollution regulation TA Luft. +500 references in more than 50 countries witness the robustness of our FAII flares! Available in a rage of 20 - 3.000 Nm3/h, at various pressures. Highly customizable for very particular project ...
-
Manufactured by Suma Rührtechnik GmbHbased in GERMANY
Top-mounted energy-efficient agitator for high dry matter content. The FTX shaft agitator for installation on the tank top can be used for dry matter contents of up to 15 %. Substrates with a high solids content can be stirred without any problems due to the high thrust of 6.5 ...
-
Manufactured by Maris Projects B.V.based in NETHERLANDS
We have developed several kind of mixers for the bio digestion industry. Depending on the type of waste you want to mix, we can advise you a type of mixer. We have special made mixers for bio digestors as well as mixers for inside ...
-
Manufactured by Process Engineering Srlbased in ITALY
The 'Bio-Gas Production & Mixing System by PE' is applied in the Primary and Secondary Digestion with the aim to produce Bio-Gas through the Anaerobic Digestion of the Sludge. Thanks to its properties, the Bio-Gas System by PE' performs: a continuous & controlled mixing of sludge, the uniformity of the digestion process inside the digesters, the uniformity of the temperature (T) of the ...
-
Manufactured by Biogas Hochreiter GmbHbased in GERMANY
This slowly rotating paddle agitator for fermenters of 16 meters diameter and 5 metres deep can deal with practically any input material, no matter what the substrate or diameter. Practical tests demonstrate that even fermentation substrates with a dry matter content of 12 percent are reliably mixed. Thanks to the enormous diameter and low speed, agitating power and energy consumption are kept in ...
-
Manufactured by Future Engineering ABbased in SWEDEN
We have successfully implemented “self-learning” vibration sensor systems and heat sensors in biogas-mixers such as other similar industrial applications. The vibration and heat sensors are used to detect measurement values. They can preferable be used in ATEX zones as in the WWTP, biogas, chemical, pharmaceutical and mining ...
-
Manufactured by streisal GmbHbased in GERMANY
High and adjustable stirring performance Great hydraulic thrust which can be adapted to the biological condition of the substrate / mixing task by means of a height adjustment. Unhindered substrate inflow. no shadowing effect from interfering fixtures. The large diamter of the propeller hub and -blade virtually eliminates the build-up of layers in this critical area. ...
-
Manufactured by Lothar Becker Agrartechnik GmbHbased in GERMANY
This biogas agitator was developed for use in fermenters, secondary fermenters and combination storage tanks. Due to v-belt drive the noise development could be reduced. The multi-part driveshaft allows that most of the maintenance work can be carried out from the ...
-
Manufactured by LJM Lind Jensens Maskinfabrikbased in DENMARK
The LJM Mixer type OMPG R 160 for Biogas plants is a heavy duty mixer in superior quality that ensures you a problem free biogas production. OMPG R160 is supplied with AISI 316ti mounting brackets and a type C motor console with rollers for the easy guidance on the ...
-
Manufactured by DODA Costruzione Macchine Agricolebased in ITALY
Similar to BG 80 series, it differs from it mainly for 2 aspects: this mixer can be equipped with electric motor complete with toothed belt or with a 500 RPM hydraulic motor; the drive line is tied up to frame with hydraulic pistons through a double joint which allow both vertical and horizontal ...
-
Manufactured by Landia a/sbased in DENMARK
Landia GasMix is a mixing system that is suitable for all types of digestion tanks and reactor tanks. All mechanical components on GasMix are located outside the tank. Therefore, it is not necessary to open or empty the tank when performing service or repairs on the GasMix system. In addition to the safety aspects, the system also offers financial benefits as biogas production can continue while ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you