Biogas Roofs Equipment For Bioenergy
-
based in GERMANY
The single-shell biogas container roof systems can be delivered in "gas-tight" or "odour-tight" versions. The material used for the single-shell roof system is a PVC-coated polyester fabric, which has been especially developed and produced for use with biogas tanks. The material is very flame-retardant according to DIN 4102 B1 and UV-resistant. Materials with a weight of 800 g/m² to 1,500 ...
-
Manufactured by Henze-Harvestore GmbHbased in GERMANY
This design makes possible the storage of fermentation substrate and biogas in one tank. The tank walls are produced out of steel, stainless steel or enamelled steel. These different materials are also distinguished by their high resistance to the corrosion usually caused by fermentation substrate and biogas. For roof construction, gas depots made from PVC and/or EPDM foil are used – ...
-
Manufactured by AgriCompact Technologies GmbHbased in GERMANY
This COMPACT HAY DRYER with air recirculation dries 56 bales of forage, and accommodates either round and/or square bales. The plant in metallic construction is arranged in 4 rows and can be loaded and unloaded from both sides with a telescoping loader. This COMPACT HAY DRYER is equipped with an elelctric motor which powers the fan. This model uses hot water at 80° C (176° F) from the ...
-
Manufactured by Albers Alligatorbased in NETHERLANDS
High demands are placed on gas storage systems. Gas-tightness, service life and environmental aspects play a major role. Therefore, the material of the Biogas roof must be easy to process, have good kink resistance, meet many mechanical requirements and have good chemical stability. We have all the expertise in-house. Albers Alligator obviously uses its own experienced employees to install the ...
-
based in EGYPT
"For round silos made from concrete, steel or wood. Large storage capacity due to its shape. Especially suitable for covering fermenters at pressures up to 15 mbar. Used at many water treatment plants, landfills and agricultural biogas plants. Double-layered gas storage system. Reliable and maintenance-friendly storage ...
-
Manufactured by Sattler Ceno TOP-TEX GmbHbased in GERMANY
The pole-supported double-Shell biogas roof consists of an outer membrane and inner membrane which forms the biogas storage ...
-
Manufactured by Chengdu AMOCO Architecture Technology Companybased in CHINA
AMOCO DANTIAN AMC type double membrane biogas holder (digester membrane roof, digester cover) is similar with the AMB type one, which is installed on the top of the digester tank with conical.membrane ...
-
Manufactured by SiGa-Tech Sp. z o.obased in POLAND
Biogas dome is first technological element of biogas network. Domes are mounted at digester/anaerobic reactor roof. Biogas dome is equipped with two cut-off valves used to direct biogas flow to biogas network or to atmosphere through outlet chimney. Biogas dome is also equipped with pressure gauge and connector pipes for biogas measurement. Biogas dome can be additionally equipped with filter bed ...
-
Manufactured by A Consult Ltd.based in UNITED KINGDOM
Manufactured from biaxel reinforced fabrics with a high grade chemically resistant PVC coating. Operational pressures varying from 0 to 5mbar, offering maximum levels of gas storage with domes available to accommodate tank structures up to 40m diameter. Available in Quarter Dome option, offering all the benefits of a standard double membrane roof but with a lower dome height to assist with ...
-
Manufactured by Flexxolutions BVbased in NETHERLANDS
The Flexxodomer – DOuble MEmbrane Roof and thus DOMER – is a double layer or double membrane biogas roof that is often used in the biogas industry. The biogas roof is extremely suitable for silos where biogas is stored and/or where sustainable energy is generated. This double membrane roof can be used for biogas installations with a gas motor as well as a gas cleaning installation. ...
-
Manufactured by Chengdu AMOCO Architecture Technology Companybased in CHINA
Dantian AMB double membrane biogas holder{ digester membrane roof, digester cover) by AMOCO is normally installed on top of digester tank, apprearance is usually small hemisphere, belong to the common shape of double membrane ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you