Biogas Storage Equipment For Bioenergy Available In Australasia
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The condensate accumulator is used for both the collection of condensate water within the gas system and for drainage. Normally the condensate accumulator is integrated directly into the lowest point of the pipework by means of a flange connection. The condensate water flows into the collection container and is drained either through a ball valve, or automatically with a condensate drainage unit. ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Biogas can contain large quantities of poisonous hydrogen sulphide depending upon the fermentation process and which input materials are used. This gas can cause permanent damage to gas engines or other consumers of the biogas. Depending on concentration, the majority of the hydrogen sulphide gas can be effectively removed by using an ennox active carbon ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The double membrane gasholder is made up of two spherical shaped polymer membranes (other forms are also possible), lying one inside the other. The external membrane is maintained in a stable form with the use of an air blower. The external membrane then serves as protector for the inner membrane against the influence of environmental factors such as wind or snow. The biogas is contained within ...
-
Manufactured by Airranebased in SOUTH KOREA
Biogas, which has recently been attracting attention as a next-generation eco-friendly fuel, is a clean renewable energy source and is recognized as a resource that can replace natural gas in power generation and vehicle fuels. Biogas is generated from food waste, manure, sewage treatment facilities, and landfills. Biogas is generally composed of 60% methane (CH4) and 40% carbon dioxide (CO2). ...
-
Manufactured by Prodevalbased in FRANCE
Depending on its source, biogas contains a variable quantity of different pollutants (VOC, siloxanes, H2S among others) that it is necessary to process before using the biogas. To remove these pollutants, we offer a treatment using activated carbon ...
-
Manufactured by Idro Groupbased in ITALY
Anaerobic digester for biogas and electrical energy production from organic fraction of municipal solid waste (O.F.M.S.W.). The Wastepower plant is based on wet anaerobic digestion of input materials, where organic substances are degraded by microorganisms in the absence of oxygen (anaerobic condition) at a temperature of approx. 35°-37°C (mesophil process) or at 50°-55°C ...
-
Manufactured by ÖKOBIT GmbHbased in GERMANY
With its biogas plants, ÖKOBIT relies on prefabricated tanks made from highest concrete quality or steel. The intelligently prefabricated component parts are extremely resistant to chemical reactions. They are supplied true to size, assembled on site and sealed absolutely ...
-
Manufactured by Ammongas A/Sbased in DENMARK
Ammongas uses the well-known absorber-stripper system with amine for upgrading of biogas. The process has been used for many years in the oil and gas industry for removal of CO2, H2S other acidic gasses, and is known for being a robust and reliable system. Ammongas’ absorption process is so efficient that the methane slip to the atmosphere is less than 0.05%. This means that the ...
-
Manufactured by Sattler Ceno TOP-TEX GmbHbased in GERMANY
The pole-supported double-Shell biogas roof consists of an outer membrane and inner membrane which forms the biogas storage ...
-
Manufactured by Shenzhen Puxin Technology Co. Ltd.based in CHINA
PUXIN Portable Assembly Biogas System-15m3 is a Do It Yourself (DIY) Kit BIOGAS SYSTEM It is surface mounted, there is no need for digging or heavy construction. It can be assembled within 90 minutes by the client itself without any training. High efficient biogas system with hollow sunlight sheet green house and pad for insulation and heating. ...
-
based in AUSTRALIA
The Agenitor is a highly efficient power plant with optimsed gas engine and lower fuel costs. This engine is a result of intensive work by the 2G development team at 2G Drive GmbH. It's improved combustion chamber geometry has made it possible to increase the efficiency of the Agenitor range. ...
-
Manufactured by GGE Power Pvt. Ltd.based in INDIA
GGE introduces latest glass fused coated steel digesters & tanks in various sizes. GGE tanks find a wide range of applications in the field of biogas plant. Digesters, post-digesters and gas storage tanks are the main ...
-
Manufactured by Industrial & Environmental Concepts, Inc. (IEC)based in USA
IEC provides a complete line of gas collection covers for both ponds and tanks. Each cover system is designed with a gas-tight perimeter anchoring design, whereas gases are continuously removed and channeled to perimeter piping where it exits the basin to be flared or used as fuel. Rainwater trenches are created by strategically placing ballast weight of pre-determined size and weight in a ...
-
Manufactured by Biogas Hochreiter GmbHbased in GERMANY
The also patented "standing Steinauer agitator" is designed for smaller containers and containers with changing liquid levels. The large paddle stirs the fermentation substrate on a horizontal plane. Since the paddles are “twisted”, swirling is produced that mixes the substrate vertically. This agitator is also operated by means of a frequency transformer to reduce power consumption. ...
-
Manufactured by Biosling ABbased in SWEDEN
Biogas is formed when oxygen-free decomposition of organic material takes place and is created in anaerobic decomposition facilities. The biogas contains methane and carbon dioxide and the gas can for example be burned and used as vehicular fuel and heating. Before the biogas can be used as a form of vehicular fuel it must be thoroughly cleaned from carbon dioxide so that the methane percentage ...
-
Manufactured by BTS Biogasbased in ITALY
The small plant FARMER is especially designed for the use of manure from agriculture. The plant size is matched to the average quantities produced. For this purpose, the technology in the large plants is as much as possible simplified and transferred to small variants. Therefore, in the 100 – 300 kW range, the FARMER represents an opportunity allowing smaller and average-sized farms to ...
-
Manufactured by Chengdu AMOCO Architecture Technology Companybased in CHINA
AMOCO DANTIAN AMC type double membrane biogas holder (digester membrane roof, digester cover) is similar with the AMB type one, which is installed on the top of the digester tank with conical.membrane ...
-
Manufactured by Biogaz System Depollution Valorisation (BSDV)based in FRANCE
BSDV-puce We developed and put in operation an original system of biogas extraction that combines the deep capture of vertical wells with a horizontal draining. This technique was later applied to a great number of projects. The BSDV capture system allows the draining and the re injection of liquid residue of the landfill according to needs. Our nets are equipped with biogas captivation – ...
-
Manufactured by Biofrigas Sweden ABbased in SWEDEN
Biofrigas' CryoSep family are container-based facilities that enable smaller producers such as agricultural, municipal facilities and food industries to produce liquid biogas from their organic waste streams. As a starting point, CryoSep uses the gas produced in a digester, so-called biogas, which consists mainly of methane and carbon dioxide. In cases where the biogas after the digester has been ...
-
Manufactured by IES Biogas srlbased in ITALY
To profit by becoming energy producers is the tangible proposal that IES BIOGAS makes to small and medium-sized livestock farms. Even yours. Today and right away. You don't need to have huge plants, as biogas plants are more contained, today more than ever, and have high efficiency and greater development. IES BIOGAS has called them MiTO. They range from 100 to 300 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you