Biomass Cogeneration Equipment For Bioenergy
-
Manufactured by Energimizer - a brand by Hevac Ltd.based in UNITED KINGDOM
Manufactured by the Italian company, ESPE, the ESPE 50 KWE provides a renewable solution for small-to-medium sized businesses when it comes to heating and power production. This micro-cogeneration system utilises virgin wood chips as biomass fuel for gasification. The subsequent gas fuel produced is then used to power the unit, enabling the production of both electricity and thermal energy for ...
-
Manufactured by Air Industrie Thermique España, S.L. (AITESA)based in SPAIN
Recover waste heat from the WHRB exhaust gas steam and Fired Heaters. The three heat transfer mechanisms are: conduction, convection and radiation. Recover residual heat from a hot current with a high content of potential energy and putting that energy into use increases the total efficiency of the process. Using this improvement, energy consumption in plants can decrease with consequential ...
-
based in NETHERLANDS
Biomass boilers are in great demand as an excellent way to reduce heating costs. Connecting these boilers requires extra attention. We have already successfully installed many of these systems, and will be pleased to advise you on the choice of capacity, manufacturer, type of fuel, ...
-
Manufactured by Eric-Sonbased in ITALY
Eric-Son supplies highly efficient turnkey biomass cogeneration plants with steam turbines for the simultaneous production of power and heat for industrial processes or district heating. Additionally, by using an absorption chiller it is also possible to generate cooling energy. Numerous industrial processes relating to organic products create large quantities of residual substances that can be ...
-
Manufactured by Environ LTDbased in UNITED KINGDOM
The drying oven can be modified for different material throughput. No need for separate drying areas. Electrical Control Unit Set multiple parameters to control drying operation; Enables different parameters to be established to dry different ...
-
Manufactured by BSP Engineering S.r.l.based in ITALY
Dryer & solutions for the intermediate storage of heat from waste heat or renewable energies. The storage of heat from biogas plants, biomass cogeneration plants or other heat sources is an important prerequisite for eective use. BSP buer tank systems are economic system solutions for the storage and supply of thermal energy and can be easily integrated into customized solutions for local ...
-
based in FINLAND
We can use waste wood with higher moisture content up to 40% (Our plants do not need a dryers before gasification), Waste wood can be low-quality waste wood = lower fuel cost to produce electricity, Our gas cleaning system is water based cleaning system = cleaner gas and lower OPEX costs when engine gets clean gas, Our pricing is competitive with around three year payback time, Delivery will be ...
-
based in USA
TRNSYS (pronounced 'tran-sis') is an extremely flexible graphically based software environment used to simulate the behavior of transient systems. While the vast majority of simulations are focused on assessing the performance of thermal and electrical energy systems, TRNSYS can equally well be used to model other dynamic systems such as traffic flow, or biological ...
-
Distributed by Flex Technologies Limitedbased in UNITED KINGDOM
WBP series power/CHP plants operate on wood chips and briquettes, as well as briquettes made of straw, corn cob, sunflower hulls, olive pomace and ...
-
based in IRELAND
Clearpower are highly experienced in district heating systems comprising fossil fuel, chp and biomass ...
-
Manufactured by Enertimebased in FRANCE
The ORCHID range is intended for ORC machines from 300 kWe to 3MWe using innovative working fluids such as HFC, HFO, HFE refrigerants and for temperatures above 90 ° ...
-
Manufactured by Shin Nippon Machinery Co., Ltd.based in JAPAN
With turbine exhaust pressure a vacuum, the condensing multistage turbine is a high-efficiency, high output model capable of fully converting the thermal energy of steam to velocity, without loss. This series of products are known as 'multistage' steam turbines and are characterized by two or more rotor discs mounted on the shaft. The number of stages and the average pitch circle diameter (PCD) ...
-
Manufactured by USA Sludgebased in USA
Waste heat is created by the use of combined heat power systems or waste heat generated by existing boiler use. This is an innovative way to increase drying efficiency. Waste heat lowers greenhouse gas emissions (GHG) and utility costs. We use state of the art systems that are environmentally friendly. USA Sludge’s open air dryer in Kingman, Arizona dries biomass material using a ...
-
based in GERMANY
We are specialists in the area of planning, financing, constructing and operating biomass cogeneration plants and respectively biomass heating stations. The plants are designed based upon the heat requirements of supplied company. Our client’s individual needs determine the used technology. Wood chips from fresh wood or waste wood from wood processing companies are combusted in a special ...
-
Manufactured by Wright Tech Systems Inc.based in CANADA
Biomass is considered a renewable energy resource that can be used to provide the necessary fuel for heating, steam or power applications at various commercial, governmental, institutional and industrial facilities. For example, bio-power (biomass-to-electricity power generation) is a proven electricity-generating option. The majority of capacity is produced in Combined Heat and Power (CHP) ...
-
Manufactured by Aalborg Energie Technik a/s (AET)based in DENMARK
AET designs and supplies turnkey biomass cogeneration (CHP) plants with excellent and well-documented performance and ...
-
Manufactured by Eric-Sonbased in ITALY
Eric-Son supplies supply highly efficient turnkey biomass cogeneration plants with Organic Rankine Cycle turbines for the simultaneous production of power and heat for both industrial processes and district heating. Additionally, by using an absorption chiller, the system implemented by Eric-Son is also able to generate cooling ...
-
Manufactured by Dunphy Combustion Ltd.based in UNITED KINGDOM
Dunphy bespoke or standard burners are key components of high efficiency, low emission waste to energy bio gas systems. Our burners are ideal for standard incineration, bio gas and bio fuel heat and steam generation. We have international experience in designing and customising axial air flow, box and utility burners to match specific site conditions and the individual characteristics of waste ...
-
Manufactured by Beltran Technologies, Inc.based in USA
Beltran's biomass gasification technology converts locally-sourced organic wastes into clean, efficient energy and valuable co-products, with dramatic reductions in CO2 and pollutant emissions. The Beltran Biomass Cogeneration System is an integrated, three-stage process that converts biomass and other organic wastes into powerful, clean-burning synthesis gas that can be used to generate energy ...
-
Manufactured by Ashwell Biomass Ltdbased in UNITED KINGDOM
Produce Electricity & Generate Heat with a Biomass Boiler CHP solution. Ashwell Biomass along with leading Organic Rankine Cycle (ORC) specialists Enogia to offer low maintenance, cost effective and proven biomass Combined Heat and Power (CHP) solutions. Already got a biomass boiler but want to explore CHP? A key benefit of the Ashwell/Enogia solution is that it is compatible with most ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you