Biomass Conversion Equipment For Bioenergy Available In Africa
-
Manufactured by Pyrotech Energybased in AUSTRALIA
Pyroflash technology is unique in simultaneous production of several qualities of bio-crude oil. Normally we distinguish these oils between two qualities: Dry Oil (3w% water content) and Wet oil (20w% water content). The Dry oil has an HHV of 24 MJ/kg and the Wet oil has an HHV OF 17 MJ/kg. The Wet oil is liquid at room temperature, whereas the Dry oil is solid in room temperature. ...
-
Manufactured by Emergent Waste Solutions Inc.based in CANADA
When tires or plastics are processed with the ATS the liquid component is a dark coloured light diesel, equivalent to a #2 Home Heating Oil. This product can be blended as-is with regular diesel, or it can be used without further refinement in diesel engines that do not specify otherwise. It is suitable, without additional processing, for diesel generators and off-road machinery. The Green Diesel ...
-
Manufactured by Algbiobased in TURKEY
Algal biofuels are renewable fuels derived from the conversion of algae biomass into various types of biofuels. These fuels are considered a promising alternative to conventional fossil fuels because they can be sustainably produced, are biodegradable, and have the potential to significantly reduce greenhouse gas ...
-
Manufactured by Novozymes A/Sbased in DENMARK
Cellic® helps plant owners optimize their processes when producing fermentable sugars and ethanol derived from cellulosic ...
-
Manufactured by Diversified Technologies, Inc. (DTI)based in USA
Pulsed Electric Field (PEF) processing uses a high-energy pulsed electric field to break open vegetative cell walls in a process called 'electroporation'. PEF processing can destroy pathogens in liquid food and wastewater; increase yields in starch and sugar extraction from plants such as sugar beets; and aid the dewatering digestion of biomass, enabling its conversion to alternative ...
-
Manufactured by Hybag Automationen AGbased in SWITZERLAND
Oil reserves are decreasing; atomic energy is controversial, but at the same time the demand for energy is increasing all over the world. Accordingly the significance of natural energy produced from sun, wind, water, earth and biogas is ...
-
Manufactured by Emergent Waste Solutions Inc.based in CANADA
All biomass, when processed with the ATS plant, creates a viscous oil that can be captured and used as-is, or further refined to create a higher value product. Approximately 30% of the biomass is converted to bio-oil. The product generated by the ATS has less moisture than that of competing pyrolysis technologies and is a purer product than that created with other methodologies. This product has ...
-
Manufactured by PDC Machines Inc.based in USA
PDC specializes in delivering comprehensive solutions, spanning from compression to dispensing, tailored for alternative energy applications. We proudly hold the top position as the primary supplier of gas compressors for hydrogen fuel-cell-powered automobiles, buses, and material handling markets, boasting over 1,000 compressor installations worldwide and an expanding presence. Drawing from ...
-
based in SWITZERLAND
One touch solution to innovate in nutrition. Best in class in acceleration. How we make a difference: Affordable, higher functionality, traceable and safe. Our catalyst technology valorizes lignocellulosic plant biomass. Our catalyst is fully recoverable for subsequent reuse. Our method is simple, cost efficient and fast to implement. Our products have higher ...
-
Manufactured by Geurts Heatexchangers B.V., part of Heilig Groupbased in NETHERLANDS
Striving for a better environment leads to a growing number plants worldwide producing renewable energy. In the production process of biofuels, for instance, biomass conversion, solid biomass, liquid fuels, and biogasses many heat transfer applications are used to reduce energy consumption and pollution. Geurts engineers and builds biofuel heat transfer equipment for subcooling, dehumidifying ...
-
Manufactured by Organics Group plcbased in UNITED KINGDOM
Biomass gasifiers operate by heating biomass in an oxygen-starved environment until the biomass breaks into its constituent chemical components. The process requires the input of heat energy for the endothermic chemical reaction to proceed that splits the molecules apart. Gasification with air produces a low-Btu gas, with a heating value about one-fifth that of natural gas. Indirectly heated ...
-
Manufactured by PDC Machines Inc.based in USA
PDC Machines is the World’s Leading Hydrogen Gas Compressors Manufacturer for Hydrogen Refueling Stations. PDC specializes in providing complete solutions for alternative energy applications. We are the #1 supplier of gas compressors for automobiles, bus and material handling fueling market with nearly 350 compressor installations worldwide and counting. With decades of experience in ...
-
Manufactured by W. R. Grace & Co.based in USA
Success in the renewable fuels market is critically dependent on overcoming the economic hurdle of biomass conversion which requires ongoing innovation and development of new technologies and solutions. Grace offers several products designed to help overcome biomass conversion and renewable technology challenges. With Grace's customized solutions, biorefining becomes simpler, faster and more ...
-
Manufactured by ETIA S.A.S.based in FRANCE
In the fast-developing world, coal is the largest contributor to the human-made increase of CO2 in the atmosphere. Its environmental impact spreads far across many areas, from air pollution, water, and waste management, up to the increased land uses. In the face of greenhouse gas emissions, industries are seeking a new way to manage their environmental impact and reduce the carbon footprint of ...
-
based in NETHERLANDS
Modern boiler plants have a wide variety of conveying needs. While traditional mechanical conveying methods may be well suited for high capacity tasks like biomass fuel stream transport, lower volume and lighter materials such as ash, dust, and small reclaimed fuel particles are often most efficiently transported using pneumatic conveying ...
-
Manufactured by Anellotech, Inc.based in USA
Anellotech's core technology, Thermal Catalytic Biomass Conversion (Bio-TCat™) was developed to produce chemicals and fuels from renewable, non-food biomass. Based on scientific research initially performed in Professor George Huber's laboratory at the University of Massachusetts-Amherst, the process has subsequently been developed by Anellotech. Bio-TCat is covered under issued patents and ...
-
based in CZECH REPUBLIC
AIR TECHNIC s.r.o. designs and builds complete biomass gasification power plants with IC engines and generators. In the year 2015 AIR TECHNIC s.r.o. successfully completed gasification technology development. Plant and technology’s technical parameters and commercial reliability are proven in continuous operation. Gasifier technology is registered at the Offices of Industrial Ownership of ...
-
based in USA
The development of cost effective “drop-in” transportation fuels is from algae is our key goal. NAABB is developing technologies to convert lipids/hydrocarbons and biomass residues into useful fuels. Our program involves understanding the physical and chemical properties of algal biofuels and the thermophysical and transport properties of biofuels. NAABB is developing lipid conversion ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you