Biomass Drying Equipment For Bioenergy Available In Michigan
-
Manufactured by BUTTNER Energie- und Trocknungstechnik GmbHbased in GERMANY
Gentle drying of bulk material at low temperatures. Belt dryers are applied when different kinds of bulk material are to be dried using residual heat and waste heat from other processes. The main field of application is the wood-based industry as well as the pellet industry, and food industries. They are also suitable for drying biomass and the fuel pre-heating processes in power plants. ...
-
Manufactured by TAIMWESER S.A.based in SPAIN
Biomass is one of the major sources of renewable energy existing in the World, but to date has not been exploited to the full. For this reason we have developed in our own factory, over five years, an innovative in house technology which has produced a gasification plant with a great energy efficiency to produce electrical power and thermal energy from Biomass, and which is now available for the ...
-
based in CZECH REPUBLIC
AIR TECHNIC designs and supplies technological equipment for biomass (wood chips) drying in power engineering. The purpose of the technological equipment is to dry the biomass, respectively reduction of water content in biomass due to an increase in energy value (calorific value). Technological equipment for drying wood chips consists of a separate wood chips dryer and AHU for supplying drying ...
-
Manufactured by Pyrotech Energybased in AUSTRALIA
Mobile PyroFlash plants are standard equipped with a dosing silo on top of the installation. The biochar is removed from the reactor with a screw conveyor, the liquid products are pumped. The syngas can be sent to flare for thermal use or used as a gaseous bio-fuel connected to a gas generator for electricity ...
-
Manufactured by Cyclone Power Technologies, Inc.based in USA
Cyclone’s Waste Heat Engine (WHE, pronounced “we”) recaptures heat from external sources to create steam which powers the engine. The WHE models are designed to run a grid-tied or primary electric power generator while producing ZERO Emissions. All WHE operations are currently run through Cyclone’s subsidiary Cyclone-WHE LLC, which operates under the trade name “WHE ...
-
Manufactured by Syncraft Automation GmbHbased in AUSTRIA
SYNCRAFT is your professional partner for wood-gas power plants. The table below shows the technical data of the SYNCRAFT wood-gas power plant CW700-200. To use the resulting low-temperature heat, a heat pump can be offered optionally. Depending on the design, a thermal power of up to 140 kW is available (at a water temperature of up to 55°C). This temperature can be optimally used for ...
-
Manufactured by Alvan Blanch Development Company Limitedbased in UNITED KINGDOM
The main reason for drying biomass is to increase the combustion efficiency by de-watering the biomass products. The solid biomass system has drawn more attention to utilising waste heat from biomass boilers and CHP engines as a biomass drying process. Further encouraged by various government renewable heat schemes (such as RHI) solid biomass (including solid biomass contained in waste) system ...
-
Manufactured by The Onix Corporationbased in USA
The ONIX Corporation offers a full line of flue-gas-to-air heat exchangers. These heat exchangers recover the energy from a hot flue gas (up to 1800°F) and preheat fresh ambient air to the desired temperature rise. This application is ideal for industrial space heating, air make-up units, indirect drying requirements, and lumber kilns. These exchangers are also employed in pollution control ...
-
Manufactured by ETIA S.A.S.based in FRANCE
We offer continuous flow conveyor system for drying, roasting, and or cooling that offers many auxiliary options for a wide selection of products and ...
-
Manufactured by ETIA S.A.S.based in FRANCE
Termobio is high-efficiency biomass dryer developed and patented by ETIA. Its construction bases on screw conveyor equipped with brushes that ensure the good material transportation along the dryer. The solution is designed to dry biomass from up to 50% down to less 5% and adapted to a variety of wood sawdust, straw, pellets as well as biomass chips. The unique construction of the dryer ...
-
Manufactured by Alvan Blanch Development Company Limitedbased in UNITED KINGDOM
The main reason for drying biomass is to reduce the overall energetic efficiency, prior to the biomass combustion and storage. Further encouraged by various government renewable heat schemes (such as RHI) solid biomass (including solid biomass contained in waste) system has drawn more attention to utilising waste heat from biomass boiler as well as biomass drying process. Alvan Blanch customers ...
-
Manufactured by Groupe Berlie-Falco Inc.based in CANADA
The Bristol Waste Water Treatment Works in Avonmouth, UK, operates since 2008 a belt dryer evaporating approximately 3 tons of water per hour heated with steam that is heated by exhaust gases from generators. The sludge to be dried comes from an advanced anaerobic digestion and its biogas is used in the generators to make electricity. The final dried product is broken down to desired sizes to be ...
-
Manufactured by Radhe Engineering Co.based in INDIA
In the Flash Dryer system, Input Biomass (with Higher Moisture) feed in a screw Conveyor mix with hot air. Hot Air which is generated from furnace passes with wet Biomass in duct line. Due to ID Blower developed negative pressure in full system up to duct line. Moisture liberated from biomass due to more than 100.C Temperature inside system. Due to maximum Contact time and surface area moisture ...
-
Manufactured by USA Sludgebased in USA
We specialize in low temperature biomass dryers that can operate at ambient air temperatures and also have the ability to operate at higher temperatures using heat exchangers to transport hot air with low air speed throughout the system, creating less dust. Biomass is spread evenly over the conveyor belt and is capable of being dried with 70% moisture down to 30% moisture, at a temperature of ...
-
Manufactured by Syncraft Automation GmbHbased in AUSTRIA
SYNCRAFT is your professional partner for wood-gas power plants. The table below shows the technical data of the SYNCRAFT wood-gas power plant CW1200-400. To use the resulting low-temperature heat, a heat pump can be offered optionally. Depending on the design, a thermal power of up to 250 kW is available (at a water temperature of up to 55°C). This temperature can be optimally used for ...
-
Manufactured by AGROMECH Sp. z o.o.based in POLAND
Functioning: material that is to be dried, goes using a conveyer and a chute down by gravity to the drying drum where the process of drying takes place. In the drum, the material is subjected to drying factor which is a composition of hot air and exhaust gases produced in the process of fuel ...
-
by Proxipelbased in SWITZERLAND
The particularity of the Proxipel technology lies in its ability to combine both mobility and drying of biomass. In addition to the assembly of the various usual elements of a pellet production line, we have specifically developed certain components in-house, in particular for everything relating to the drying of ...
-
Manufactured by Ronak Engineeringbased in INDIA
Overview of Sawdust Flash Dryer: Sawdust flash dryer agricultural waster dryer is a new type of biomass material drying hardware solution, which is widely used in wood pellet plants and charcoal briquette processing plants. Called a line dryer, it is an acceptable choice for strong raw materials with high flow capacity. The reasonable moisture content of biomass raw materials used to make wood ...
-
Manufactured by ETIA S.A.S.based in FRANCE
In the fast-developing world, coal is the largest contributor to the human-made increase of CO2 in the atmosphere. Its environmental impact spreads far across many areas, from air pollution, water, and waste management, up to the increased land uses. In the face of greenhouse gas emissions, industries are seeking a new way to manage their environmental impact and reduce the carbon footprint of ...
-
Manufactured by Jiangsu Jingliang New Energy Co.,Ltdbased in CHINA
We can provide professional pellets making solutions according to customer’s actual needs.Wood pellet line capacity ranges from 1T to 20T per ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you