Biomass Treatment Applications

ANDRITZ Feed & Biofuel Technologies is a global leading supplier of technologies, production plants, systems and services for the animal feed, aqua feed, and pet food industries and for the biomass pelleting industry.

By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

Possible applications of the KAHL pelleting press: Wood waste, wood shavings, wood chips, sawdust, wood and grinding dust, straw, miscanthus, bagasse and other biomass.

By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY.

By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY.

By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY.

If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.

By AMETEK Brookfield based in Chandler, ARIZONA (USA).

By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY.

Biomass produces a cleaner, renewable energy, reducing harmful carbon dioxide emissions, all while creating lower operating costs for power plants. Biomass, the by-product of pulp and paper, agriculture, and municipal sludge, is perhaps the oldest source of renewable energy on Earth. Biomass' use in energy production is currently growing worldwide at an exponential rate.

By Vulcan Drying Systems based in Moberly, MISSOURI (USA).

A comprehensive range of power generation technologies with environmental benefits. ANDRITZ technologies and processes for power generation utilize renewable fuels as well as traditional fossil fuels in efficient and environmentally appealing ways. In addition, there are purely environmental technologies in this category to meet the most stringent standards for emissions and effluent quality. From steam generators and hydropower plants, to air pollution control systems and wastewater treatment equipment, ANDRITZ...

By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY.

Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

By STELA Laxhuber GmbH based in Massing, GERMANY.

Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the grid.

By All Power Labs based in Berkeley, CALIFORNIA (USA).

Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally,...

By WEIMA based in Ilsfeld, GERMANY.

Bio-fuel: A Bio-fuel is a fuel that contains energy from geologically recent carbon fixation. These fuels are produced from living organisms. Bio-fuels are made by a biomass conversion from a wide range of natural and organic resources which includes solid biomass, liquid fuel and biogases. Bio-fuels have increased in popularity because of rising oil prices and the need for energy security. The two main bio-fuels are ethanol and bio-diesel; both type of fuel causes less pollution as compared to conventional...

By Proxion Process based in Manchester, UNITED KINGDOM.

You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.

By TerraSource Global based in St. Louis, MISSOURI (USA).

Large Magnets (Usually Electromagnets as shown) are often supplied to remove ferrous contamination from raw feed stock in Power Stations, such as Biomass or Coal.

By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

MDF production requires large amounts of energy. Most of the demand of energy is thermal: steam for the cooking and refining process, hot gas for drying and thermal oil for the continuous press. VYNCKE offers customized energy solutions, burning a wide variety of process fuels and external fuels (all types of biomass). The energy plant can be designed to produce steam in a direct way (through an integrated steam boiler) or in an indirect way via a thermal oil-steam heat exchanger. The system can be adjusted to...

By VYNCKE based in Harelbeke, BELGIUM.

By BMH Technology Oy based in Rauma, FINLAND.

By BMH Technology Oy based in Rauma, FINLAND.