Only show results in Connecticut? Ok

Energy from Biomass Applications

  • Premium

    Solid/liquid separation for feed & biofuel technologies

    ANDRITZ Feed & Biofuel Technologies is a global leading supplier of technologies, production plants, systems and services for the animal feed, aqua feed, and pet food industries and for the biomass pelleting industry.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

  • Premium

    Emission control solutions for biomass and coal combustion sector

    For particulate matter (PM) emission control in high temperature exhaust streams, such as those from biomass or coal boilers and heaters, common dedusters such as cyclones and multicyclones are not able to comply with current emission limits. This is mainly due to their low efficiency, particularly for small particles (less than 10µm). In order to meet emission limits this usually requires an additional investment in a final stage deduster. Bag filters (BF) are very efficient dedusters. They can also be...

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Industrial waste solutions for Pelleting of Biomass industry

    Possible applications of the KAHL pelleting press: Wood waste, wood shavings, wood chips, sawdust, wood and grinding dust, straw, miscanthus, bagasse and other biomass.

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY.

  • Premium

    Process instrumentation and analytics solutions for biofuels industry

    In the field of renewable energy, our comprehensive portfolio of reliable, durable, easy-to-use products for process instrumentation and analytics provides a solid foundation for mastering the complex processes in this industry.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Premium

    Precision moisture analysis instruments for measuring moisture and ash in biomass

    If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.

    By AMETEK Brookfield based in Chandler, ARIZONA (USA).

  • Solutions for the energy sector

    New waste separation techniques are being implemented, and R&D programs focus on much more than waste-technology alone. The importance of biomass is recognized as a potential high-energy source for electricity and biogas. DMT’s ambitious approach is based on the principles of circular economy and cradle to cradle: waste products are in fact very valuable. We constantly investigate new ways in which to approach ‘waste’ from a different perspective.

    By DMT Environmental Technology BV based in Joure (NL), NETHERLANDS.

  • Waste shredding for the biomass industry

    Companies engaged in biomass processing are increasingly adopting stationary pre-shredder technology to increase the delivery of consistent, specific carbon-neutral biomass energy products. This selected fuel is attractive to operators of incineration facilities who are keen to reduce their overall carbon emissions.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Industrial briquette presses for Biomass briquetting

    Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally,...

    By WEIMA based in Ilsfeld, GERMANY.

  • Harvest biomass for renewable energy solutions for paper industry

    Despite the high competition within the paper production industry, fibre crops are developing an increasing presence.

    By Arundo BioEnergy based in Budapest, HUNGARY.

  • Cocoa shells making steam for bean processing

    Cocoa processing plants are often located in remote areas with little or no access to fossil fuels. The cocoa shells represent up to 10 % of the processing capacity of a typical plant, and often have no market value. VYNCKE offers combustion systems to convert the cocoa shells into a reliable supply of steam for the sterilization, roasting and grinding process. Our systems effectively address the challenges of cocoa shells as a boiler fuel, and even allow co-generation (combined heat and power supply).

    By VYNCKE based in Harelbeke, BELGIUM.

  • Industrial butterfly valve solutions for power generation sector

    The power generation sector is an essential service industry that uses technologies ranging from the mature steam turbine to pioneering marine current turbines. Since privatisation in the UK in 1990, the main objective of the sector has been profitability for shareholders, although issues such as health, safety, sustainability and fuel poverty have also become increasingly important on the corporate agenda.

    By Hobbs Valve based in Caerphilly, UNITED KINGDOM.

  • Magnets for the power station industry

    Large Magnets (Usually Electromagnets as shown) are often supplied to remove ferrous contamination from raw feed stock in Power Stations, such as Biomass or Coal.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

    Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

    By STELA Laxhuber GmbH based in Massing, GERMANY.

  • Feed-in tariffs while avoiding low price periods

    Biomass energy from gasification, when done responsibly with waste wood or suitable agricultural waste such as nut shells, is often eligible for feed-in tariffs. However, biomass gasification has the advantage of being on-demand, so you can feed renewable energy onto the grid at times when wind and solar are not abundant, enabling you to avoid times when prices are too low due to an excess of wind or solar power being fed to the grid.

    By All Power Labs based in Berkeley, CALIFORNIA (USA).

  • Organic Rankine Cycle for Biomass Cogeneration

    Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric. Is it suitable for you? Local utilities feeding district heating Large sawmills Pellet manufacturing companies Manufacturers of MDF / OSB panels Greenhouses Wine industries

  • Power plant

    coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

    By Runh Power Co.,Ltd based in Qingdao, CHINA.

  • Biomass Drying

    Biomass produces a cleaner, renewable energy, reducing harmful carbon dioxide emissions, all while creating lower operating costs for power plants. Biomass, the by-product of pulp and paper, agriculture, and municipal sludge, is perhaps the oldest source of renewable energy on Earth. Biomass' use in energy production is currently growing worldwide at an exponential rate.

    By Vulcan Drying Systems based in Moberly, MISSOURI (USA).

  • Multiple fuels in multi media energy plants

    MDF production requires large amounts of energy. Most of the demand of energy is thermal: steam for the cooking and refining process, hot gas for drying and thermal oil for the continuous press. VYNCKE offers customized energy solutions, burning a wide variety of process fuels and external fuels (all types of biomass). The energy plant can be designed to produce steam in a direct way (through an integrated steam boiler) or in an indirect way via a thermal oil-steam heat exchanger. The system can be adjusted to...

    By VYNCKE based in Harelbeke, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you