Energy from Wood Applications available in Grenada
-
Premium
Industrial Boilers Application Note
Industrial boilers are used to produce steam, whicl can be used to turn electrical turbines to generate power or provide heat in an industrial process. In all cases, it is important to monitor and diagnose combustion conditions within the boiler to improve its operation, and safety. Key measurements can support the optimisation of the combustion process and minimise emissions. Monitoring the boiler can also provide important information on the refractory or waterwall condition. AMETEK Land's products support ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Industrial waste solutions for Pelleting of Biomass industry
Possible applications of the KAHL pelleting press: Wood waste, wood shavings, wood chips, sawdust, wood and grinding dust, straw, miscanthus, bagasse and other ...
By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY.
-
Hydronix Sensors for Biomass Materials
Moisture measurement in wood ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
Energy from waste wood
If waste wood is utilized, woody biomass can be a form of renewable energy that complements solar and wind. Furthermore, gasifying the wood to produce electricity is a lot cleaner than disposing via controlled burns, and has a lower carbon footprint than decomposition, since decomposition often produces methane, and reverts all of the carbon to carbon dioxide, whereas with gasification, a portion is sequestered as ...
By All Power Labs based in Berkeley, CALIFORNIA (USA).
-
Hydronix Sensors for Wood Pellets
To monitor and control the feed rate of wood pellets into industrial ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
Pelleting plants for Biomass industry
For the processing of biomass for energy recovery, AMANDUS KAHL offers its customers pelleting plants for two different ...
By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY.
-
Gas Sensing for Gasification
Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high ...
By Edinburgh Sensors Ltd - TECHCOMP Group based in Livingston, UNITED KINGDOM.
-
Industrial shredders for wood/biomass industry
Reduction of volumes (14-02, MK3). Consult us for your installations of treatment: wood waste, falls of manufacture, cases, pallets, ...
By Precimeca based in Toulouse, FRANCE.
-
Biomass Pelleting - Wood Pelleting
By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY.
-
Biomass Pelleting - Wood Pelleting
By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY.
-
Composite silos and tanks solutions for renewable energy industry
On the test point of 1 January 2020, Renewable Energy was already contributing 21.3% to worldwide energy consumption. This market is in flux and Polem is developing with it. Based on almost 50 years years of experience with composite silos and tanks, Polem has a huge advantage in terms of its technical knowledge. For example, do you want to store co-products, glycerine, biodiesel and biomethanol in tanks or biomass, wood pellets and starch in silos? Polem has already developed the proven technology. Polem also has ...
By Polem B.V. based in Lemmer, NETHERLANDS.
-
Air emissions solutions for boilers and burners sector
Measurement Technique for Combustion Applications. Gas burners, Fuel burners, Low NOx burners, FLOX burners, Large-sized combustion plants, Large-sized boilers, Industrial ovens, Biomass firing plants, Wood-firing combustion ...
By Online Safety Services (Europe) Ltd based in Staffordshire, UNITED KINGDOM.
-
Wood pellet stove, wood pellet boiler
Ceramic igniter for wood pellet stove ...
By FKK Corporation based in Kyoto, JAPAN.
-
Catalyst coating technology solution for wood stove sector
Lowest total cost: Our total cost design approach and advanced raw material utilization ensures each application is the most cost effective industry solution without sacrificing emission compliance. Proven performance: OEM and aftermarket product offerings currently utilized for mobile and stationary applications. OEM certified quality: IATF – TS16949 – ISO – Certified. Every product we manufacturer meets or exceeds the highest industry standards. ...
By Synergy Catalyst based in Coppell, TEXAS (USA).
-
Harvester Machines for Energy Wood Harvesting
Neuson machines can make use of their advantages particularly in forests with a great deal of undergrowth (e.g. in spruce forests with hornbeam). Due to their manoeuvrability undergrowth can also be cut, even if these trees are often bent and ...
By Neuson Forest GmbH based in Linz, AUSTRIA.
-
Monitoring Solutions for Biomass
Biomass Power Plants generates power from biomass fuels such as wood pellets, bagasse and hog fuel. This fuels are susceptible to spontaneous combustion since it can occur at any stage of storage, production or transport. Early detection of fire or combustion is important for safety ...
By VisionTIR based in Malaga, SPAIN.
-
Organic Rankine Cycle (ORC) Systems for High Temperature CHP
ST&P, Turboden Steam & Power ORC system, is a new technical solution for Combined Heat & Power (CHP) generation, with a very high overall energy efficiency, directly employed in manufacturing and industrial processes. It allows the production of electricity and a valuable high temperature heat carrier, such as steam, directly exploitable in manufacturing ...
By Turboden S.p.A based in Brescia, ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you