Energy from Wood Applications in Europe
-
Premium
Industrial Boilers Application Note
Industrial boilers are used to produce steam, whicl can be used to turn electrical turbines to generate power or provide heat in an industrial process. In all cases, it is important to monitor and diagnose combustion conditions within the boiler to improve its operation, and safety. Key measurements can support the optimisation of the combustion process and minimise emissions. Monitoring the boiler can also provide important information on the refractory or waterwall condition. AMETEK Land's products support ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Hydronix Sensors for Wood Pellets
To monitor and control the feed rate of wood pellets into industrial ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
Pelleting plants for Biomass industry
For the processing of biomass for energy recovery, AMANDUS KAHL offers its customers pelleting plants for two different ...
By Amandus Kahl GmbH & Co. KG Distributor in Essex, UNITED KINGDOM.
-
Waste wood and contaminated wood WID Compliant biomass solutions
Tidy Planet supply 200kw up to 25Mw WID Compliant biomass boilers for the UK market, capable of treating 0-10mm fines of grade C Waste wood without pelletising, or further refining the material to remove contamination / plastics. The WID Plants can be specified with high efficiency ORC electricity generation and come with the very highest level pollution and emissions control. The plant can also be used for other waste materials such as AD Digestate and AD screened contamination and compost oversize. ...
By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM.
-
Measurement solution for Biomass combustion research
The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new ...
By Protea Limited based in Middlewich, UNITED KINGDOM.
-
Gas Sensing for Gasification
Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high ...
By Edinburgh Sensors Ltd - TECHCOMP Group based in Livingston, UNITED KINGDOM.
-
Industrial waste solutions for Pelleting of Biomass industry
Possible applications of the KAHL pelleting press: Wood waste, wood shavings, wood chips, sawdust, wood and grinding dust, straw, miscanthus, bagasse and other ...
By Amandus Kahl GmbH & Co. KG Distributor in Essex, UNITED KINGDOM.
-
Hydronix Sensors for Biomass Materials
Moisture measurement in wood ...
By Hydronix based in Normandy, UNITED KINGDOM.
-
Industrial shredders for wood/biomass industry
Reduction of volumes (14-02, MK3). Consult us for your installations of treatment: wood waste, falls of manufacture, cases, pallets, ...
By Precimeca based in Toulouse, FRANCE.
-
Biomass Pelleting - Wood Pelleting
By Amandus Kahl GmbH & Co. KG Distributor in Essex, UNITED KINGDOM.
-
Biomass Pelleting - Wood Pelleting
By Amandus Kahl GmbH & Co. KG Distributor in Essex, UNITED KINGDOM.
-
Catalyst coating technology solution for wood stove sector
Lowest total cost: Our total cost design approach and advanced raw material utilization ensures each application is the most cost effective industry solution without sacrificing emission compliance. Proven performance: OEM and aftermarket product offerings currently utilized for mobile and stationary applications. OEM certified quality: IATF – TS16949 – ISO – Certified. Every product we manufacturer meets or exceeds the highest industry standards. ...
By Synergy Catalyst Office in UNITED KINGDOM.
-
Monitoring Solutions for Biomass
Biomass Power Plants generates power from biomass fuels such as wood pellets, bagasse and hog fuel. This fuels are susceptible to spontaneous combustion since it can occur at any stage of storage, production or transport. Early detection of fire or combustion is important for safety ...
By VisionTIR based in Malaga, SPAIN.
-
Harvester Machines for Energy Wood Harvesting
Neuson machines can make use of their advantages particularly in forests with a great deal of undergrowth (e.g. in spruce forests with hornbeam). Due to their manoeuvrability undergrowth can also be cut, even if these trees are often bent and ...
By Neuson Forest GmbH based in Linz, AUSTRIA.
-
Composite silos and tanks solutions for renewable energy industry
On the test point of 1 January 2020, Renewable Energy was already contributing 21.3% to worldwide energy consumption. This market is in flux and Polem is developing with it. Based on almost 50 years years of experience with composite silos and tanks, Polem has a huge advantage in terms of its technical knowledge. For example, do you want to store co-products, glycerine, biodiesel and biomethanol in tanks or biomass, wood pellets and starch in silos? Polem has already developed the proven technology. Polem also has ...
By Polem B.V. based in Lemmer, NETHERLANDS.
-
Continuous Gas Analyzer for Combined Heat and Power Unit or Block-Type Thermal Power Station
The power units use the energy of fuel in two ways. The fuel which is burned in a motor, as the mechanical energy, is used to generate electricity. The heat is used for heating purposes. The result is high efficiency, 80-90% of the fuels primary energy are used. In cogeneration units the plug end of the fuel energy is used particularly efficiently. The fuel is burned in a motor, the mechanical energy is used to generate electricity. At the same time the by-product heat is also used for heating ...
By Agimas UG based in Frankfurt, GERMANY.
-
Air emissions solutions for boilers and burners sector
Measurement Technique for Combustion Applications. Gas burners, Fuel burners, Low NOx burners, FLOX burners, Large-sized combustion plants, Large-sized boilers, Industrial ovens, Biomass firing plants, Wood-firing combustion ...
By Online Safety Services (Europe) Ltd based in Staffordshire, UNITED KINGDOM.
-
Wood Chip for Fired Boilers
There are several, different technologies for the combustion of wood chips. Wood chip-fired boilers are usually operating in a high performance area (for example underfeed stokers are available from lOkW to 2.5MW and grate furnaces are available up to 60MW). Therefore wood chip-fired boilers are often used in industrial applications. However, also farmers and/or forest owners operate these boilers either in communities or ...
By Energy Pellets Moerdijk b.v. based in Moerdijk, NETHERLANDS.
-
Organic Rankine Cycle (ORC) Systems for High Temperature CHP
ST&P, Turboden Steam & Power ORC system, is a new technical solution for Combined Heat & Power (CHP) generation, with a very high overall energy efficiency, directly employed in manufacturing and industrial processes. It allows the production of electricity and a valuable high temperature heat carrier, such as steam, directly exploitable in manufacturing ...
By Turboden S.p.A based in Brescia, ITALY.
-
Organic Rankine Cycle Systems (ORC) for Heating Plants
If you have an exisiting heating plant with a hot water or steam boiler we can upgrade your plant to a combined heat and power plant. With your own electricity production you reduce your energy bills and contribute to a greener and more weather-independent energy system. For examples of our installations, please see ...
By Againity AB based in Norrköping, SWEDEN.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you