Bioenergy Equipment In Saskatchewan
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
Biomass drying - necessary pretreatment for further processes. ANDRITZ supplies the complete process, not only for sludge treatment, but also for biomass drying - from wet milling to drying, fine milling and pelleting, all from a single ...
-
Manufactured by Norkem Incbased in CANADA
Corrosion – Steam boilers are vulnerable to corrosion from the dissolved oxygen found in water. This is called oxygen pitting corrosion. Left untreated dissolved oxygen will rapidly corrode or “pit” boiler metal surfaces. This leads to tube or coil failure and costly boiler downtime and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Acme electric hot water boilers are economical units that deliver maximum kilowatts in minimum space requirements. Ideal for new boiler applications or as a replacement unit to upgrade existing applications. This model takes up less floor area and fits through smaller openings than oil or gas-fired units. Easy and economical to install, available in sizes from 9 KW to 2600 KW at all common ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
Manufactured by Fruitland Manufacturingbased in CANADA
Boom Swivel bearings are also referred to as a “Rotating Seal”. Booms are used to load material/liquid from a vacuum tank for different applications. The Boom Swivel design allows the boom to be rotated and effectively used under vacuum or pressure, hence its reference as a rotating seal. Lighter applications may allow the boom to be rotated manually. Heavier applications will require ...
-
Manufactured by Salford Barron & Brothers International (BBI)based in USA
With BBI's patented multi-bin technology, the MagnaSpread3 Pull-Type features three hoppers guided by independent variable-rate technology. MagnaSpread3 offers the most sophisticated multi-nutrient application on the ...
-
Manufactured by Westeel - a brand by Ag Growth International Incbased in CANADA
Available in a multitude of standard and customized sizes, Westeel Fuel-Vault® Horizontal Dual Wall ULC/UL Fuel Tanks are the safest way to store flammable or combustible liquids such as gasoline, diesel, biofuels and oils. Fuel-Vault dual wall tanks are built to CAN/ULC S601 and UL 142, are National and Provincial/State Fire Code compliant and ERCB D55 compliant. Tanks are fabricated by CWB ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you