Bioenergy Equipment In Oklahoma
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
Manufactured by Apollo Products MFG LLCbased in USA
Apollo straightening vanes conform to the most stringent requirements of AGA, ASME and API standards. Close attention to detail and high standards for craftsmanship ensure that the Apollo AGA Vanes always deliver the best available flow performance. Vanes can be furnished with handles on the inlet end to facilitate easy positioning of the vanes into the pipe spool. Other special features as ...
-
Manufactured by MRW Technologies, Inc.based in USA
An effective method for achieving smokeless flare operation is to use an air-assisted flare where forced air is mixed with the waste gas. MRW has air-assisted flares operating successfully at loading terminals, landfills, ethanol plants, chemical & petrochemical facilities, oil & gas production facilities, gas processing plants, midstream facilities, and biogas/biofuels operations. Our ...
-
Manufactured by Webco Industries, Inc.based in USA
Webco manufacturers and/or stocks North America’s widest range of welded and seamless carbon steel tube products for customers in a variety of industries. Tubing is available in a variety of grades and sizes, standard or adhering to your specifications (including tight tolerances and other unique requirements). Customers in need of reliable carbon steel solutions, delivered when they need ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. These droplets must be removed in order to avoid the ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and can be placed at lower, less visible elevations, allowing for ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility flares therefore, do not require auxiliary gas streams such as steam or air; two fluids normally used to improve smokeless capacity. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The VariMach sonic flare tip features spring-actuated variable sonic nozzles to allow the exit area to vary with pressure, ensuring constant sonic velocity of the exiting waste gas. This industry proven technology guarantees sufficient inspiration of air to ensure 100% smokeless combustion and infinite turndown. Radiation levels are also minimized throughout the entire range of flow, yielding ...
-
Distributed by Victory Energy Operations, LLCbased in USA
The Victory Energy watertube heat-recovery boiler (patented design) is one of the most flexible, cost effective and technologically advanced units on the market. Our proprietary fintube design allows us to manufacture our boilers with the smallest footprint in the industry which greatly reduces radiant heat loss to contain energy costs. Whether the need is hot water, steam (saturated or ...
-
Manufactured by MRW Technologies, Inc.based in USA
Designed for vapors from PRODUCED OIL OR WATER TANKS as well as PRODUCED GAS, MRW Non-Assist Smokeless Flares don't require forced air for smokeless combustion at infinite turndown. Vapors from multiple low-pressure tanks and high pressure sources can be controlled with a single open flame system. Built to meet 40 CFR 60.18 and operate with no visible emissions, MRW Smokeless Tank Battery Flares ...
-
Manufactured by Parnel Biogas, Inc.based in USA
The solution to landfill gas control begins with the selection of a company that specializes in just that! At Parnel Biogas Inc. we are dedicated to providing you with a quality product and prompt response/service from sales thru fabrication, installation, start-up and ...
-
based in USA
SR2O Bio Fuels, LLC has developed a process so as to yield three primary products, natural wood oils, activated carbon and biofuels from our production system, all of which have exceptionally attractive returns. Through the process of proven technologies, we are able to produce products that meet or exceed today’s petroleum standards…and at today’s ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Flame front generators are effective, time proven ignition systems which have been widely used in flaring applications for decades. The inherent reliability, rugged construction, ease of operation, and its economic advantages have allowed the flame front generator (FFG) to remain one of the most popular forms of pilot ignition in the industry. The FFG is easily adaptable to any pilot system which ...
-
Manufactured by Webco Industries, Inc.based in USA
WEBCO manufactures many sizes of carbon ERW, DOM and seamless tubular products. From our manufacturing facilities in Sand Springs, Oklahoma and Oil City, Pennsylvania we serve the entire North American ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare without the use of assist gas or a properly designed flame ring. Flare Industries’ industry-proven Flame Ring Flare Technology is recommended in low-BTU ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Momentum Biogas series of elevated flares is our most economical line of combustion equipment for the biogas sector, offering a cost-effective solution with rapid delivery. Momentum flares utilize a specially designed “burner and shroud” system to manage the intricate mixing with ambient air to provide a high DRE (98%) and high turndown ratio in a simple, yet effective, product. ...
-
Manufactured by Callidus Technologies - part of UOP, a Honeywell Companybased in USA
High stability flame retention system allows the flare to bum during all types of weather conditions. The pipe flare is the most basic type of flare tip. It is sometimes called an “utility flare”. Pipe flares will not smoke when burning low carbon content gases. The UOP Callidus Pipe Flare (CAL-PF) incorporates key design features to help ensure a stable burning flare designed for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you