Bioenergy Equipment Near USA
-
Manufactured by Bruest Catalytic Heatersbased in USA
Bruest Catalytic Heaters are designed for safety, efficiency, and ease of use in mind. The heaters are offered in multiple sizes, BTU ratings, and configurations to meet varying application requirements. All Bruest Catalytic Heaters are available for installation in Class I, Division 1 or 2, Group D locations. ATEX certifications for Group II, Categories 2 or 3, Hazard G locations are ...
-
Manufactured by Bruest Catalytic Heatersbased in USA
Bruest Catalytic Heaters’ Freez-Fiters pilot gas heaters safely and effectively heat low volumes of gas used by pilot regulators and instruments. The gas travels through the heat exchange coil to be heated by the infrared heat. The heater’s gas train includes all the necessary instruments to operate. Optional temperature controller allows the heater to modulate the heat output to fit ...
-
based in USA
Pollution Control and Prevention. Clean Technology. Consumption Reductions. Energy Efficiency and Waste Reductions: Power or Fuel. Calf. ARB aftermarket Executive Order (D-612). ...
-
Manufactured by CST Industries Incbased in USA
Storing your biomass fuel properly can make a huge difference in energy production. Choose the right tank to optimize your biomass ...
-
Manufactured by CST Industries Incbased in USA
Choosing the right tank for your Biofuels storage requires careful consideration to ensure confidence in your storage ...
-
Manufactured by CST Industries Incbased in USA
BioEnergy Storage Solutions include the industry's best cover options for digester applications. The gas zone of a digester is the most corrosive area and requires appropriate design. Along with this corrosiveness, there are many other factors (environmental, mixer loads, pressure, vacuums, ancillary equipment loads, etc.) that need to be considered in cover selection. CST Storage can design and ...
-
Manufactured by Energy Efficiency Done Right (EEDR)based in USA
The IN'FLECTOR insulating panel is reversible, so the reflective surface can face outward during the seasons when solar gain is a problem, and the carbon PVC surface can face outward during cold seasons to reflect heat back into the building and collect convective sunlight for conversion to radiant heat. The panel is held in place with magnets which form a virtually air tight seal and inhibits ...
-
Manufactured by Energy Efficiency Done Right (EEDR)based in USA
The IN'FLECTOR insulating panel is reversible, so the reflective surface can face outward during the seasons when solar gain is a problem, and the carbon PVC surface can face outward during cold seasons to reflect heat back into the building and collect convective sunlight for conversion to radiant heat. The panel is held in place with magnets which form a virtually air tight seal and inhibits ...
-
Manufactured by ACI Manufacturingbased in USA
Carbon pads are 3/8” thick. Many sizes ...
-
Distributed by Victory Energy Operations, LLCbased in USA
The Victory Energy watertube heat-recovery boiler (patented design) is one of the most flexible, cost effective and technologically advanced units on the market. Our proprietary fintube design allows us to manufacture our boilers with the smallest footprint in the industry which greatly reduces radiant heat loss to contain energy costs. Whether the need is hot water, steam (saturated or ...
-
Manufactured by Braden Groupbased in USA
Innova's catalytic reduction systems destroy carbon monoxide (CO) and volatile organic compounds (VOCs) produced as by-products of incomplete combustion in the gas turbine exhaust ...
-
Manufactured by Salford Barron & Brothers International (BBI)based in USA
With BBI's patented multi-bin technology, the MagnaSpread3 Pull-Type features three hoppers guided by independent variable-rate technology. MagnaSpread3 offers the most sophisticated multi-nutrient application on the ...
-
Manufactured by Kaydon Filtrationbased in USA
Kaydon FC Systems offer the capability to handle substantially higher flow rates than traditional fuel/water separators in the same size ...
-
Manufactured by Kaydon Filtrationbased in USA
TURBO-TOC KL Series can enhance the operation of, and financial returns from, your turbine oil-lubricated equipment. The TURBO-TOC® turbine oil conditioning systems supports long-term turbine operation and significantly reduces the probability of oil related turbine failures or unscheduled maintenance due to contaminated turbine oil. TURBO-TOC provides continuous fluid conditioning service ...
-
based in USA
SOLVING COMPLEX PROBLEMS for global industries is nothing new for John Zink Hamworthy Combustion. Over the years, we’ve led the advancement of flare design and clean flare technologies for upstream, downstream, and biogas flare industries, transforming yesterday’s fired equipment into sophisticated, low-emissions ...
-
Manufactured by Miratechbased in USA
MIRATECH RX Series housing is a high-value catalyst-silencer combo unit for engines in the 200 to 8,000 hp range. The standard silencer housing is constructed with a double wall carbon steel shell and is coated with high temperature black ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
As an alternative to recovery, hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a device known as a combustor can be successfully used as a safe and economical method of controlling vapors from the handling, storage or loading of volatile liquid hydrocarbons or ethanol when recovery of the vapors is not a viable ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Steam assisted flares are flares designed to dispose of heavier hydrocarbon gases which have a tendency to smoke. In order to prevent smoke formation, steam is injected into the waste stream using peripheral steam rings, center stream spargers and/or inner induction tubes. Steam flares are used in applications where high pressure steam is available on site. Steam flares are typically found in ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the biogas and wastewater industries. Additionally, each ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Peacock Burner was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for well testing operations and have been used in applications in the Gulf of Mexico and Arabian Gulf. When only oil is flared, a high pressure air or gas source is required to provide mechanical atomization which ensures the mixture is a fine ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you