Solid Biofuels Equipment For Bioenergy Available In Africa
-
Manufactured by Blackwood Technologybased in NETHERLANDS
Torrefaction is a thermal process used to produce high-grade solid biofuels from various streams of woody biomass or agro residues. The end product is a stable, homogeneous, high quality solid biofuel with far greater energy density and calorific value than the original feedstock, providing significant benefits in logistics, handling and storage, as well as opening up a wide range of potential ...
-
Manufactured by BEA Institut für Bioenergie GmbHbased in AUSTRIA
The riffle divider RT 50 confirms with the ISO 14780 Solid biofuels - Sample preparation. This sample divider is suitable for dividing a wood pellets sample into a representative lab-sub-sample. It comes with 1 stand, 1 sampling head and 3 pans with ...
-
Manufactured by Abellon Clean Energy Limitedbased in INDIA
BioRich -The Solid Biofuel, is Eco-friendly, Carbon Neutral product, which is a refined and densified biomass fuel that allows remarkable consistency and burning efficiency at substantially lower particulate emissions. BioRich is a powerful replacement to conventional solid fuels, widely utilized in boilers, furnaces and kilns across various manufacturing facilities. Produced in our state of the ...
-
Manufactured by AB Akronmaskinerbased in SWEDEN
Akron offers a wide array of solutions for transport of biomass in the form of wood chips and pellets. Augers and belt conveyors offer safe and secure transportation also of wet material. Common for most components is that they are all developed inhouse and optimised for their respective functions. Own development and manufacturing allows special designs for individual ...
-
Manufactured by Biofuel Technology A/Sbased in DENMARK
The BioFuel 2nd generation midsized de-centralized bioenergy plants are particularly well suited for rural areas. Here, cheap input substrates for biofuel production are abundant and readily available at minimum transportation costs. ...
-
Manufactured by Benchmarkbased in USA
Drum Heaters are thin, flexible electrical resistance heaters that may easily be wrapped and secured around drums, pails and tanks. They are made of fiberglass reinforced silicone rubber cloth with an internal resistance wire circuit . This construction provides an even heat transfer, which keeps contents at proper handling or process consistency and limits scorching or degradation of sensitive ...
-
Manufactured by UAB Agregatasbased in LITHUANIA
Wood waste is valuable resource for bio-fuel production. Agregatas technology covers all stages of making wood pellets or briquettes from various kinds of wood raw materials (logs, chips, sawdust ...
-
Manufactured by UAB Agregatasbased in LITHUANIA
Straw is increasingly popular source for bio-fuel production. Agregatas technology covers all stages of making straw pellets or ...
-
Manufactured by UAB Agregatasbased in LITHUANIA
There are various sources of waste suitable for bio-fuel production. Agregatas technology can be successfully applied to most of raw material ...
-
Manufactured by BEA Institut für Bioenergie GmbHbased in AUSTRIA
The "BIG" sampling scoop is particularly suitable for the sampling of coarse bulk materials such as: wood chips, and corresponds exactly to the specifications of ISO 18135 "Biogenic solids - Sampling", which specifies the sampling of solid biofuels. The welded crossbeam allows the sampler to draw a sample from a depth of approx. 20 ...
-
Manufactured by AB Akronmaskinerbased in SWEDEN
Akron’s highly appraised wood chip dryer is available in two sizes; with holding capacities of 16 and 32 m³ respectively. The drying process is based on heated or ambient air being blown through an airsweep floor, after which it passes through an up to 1 200 mm thick layer of wood chips or other material. The wood chips are moved towards the aft of the dryer by an integrated chain ...
-
Manufactured by Antaco UK Ltdbased in UNITED KINGDOM
Hydrothermal carbonisation is a highly efficient process which replicates the natural process of coal generation. The process uses a combination of heat and pressure to chemically transform organic waste into a carbon dense material with similar or better properties as fossil coal. ...
-
Manufactured by ETIA S.A.S.based in FRANCE
In the fast-developing world, coal is the largest contributor to the human-made increase of CO2 in the atmosphere. Its environmental impact spreads far across many areas, from air pollution, water, and waste management, up to the increased land uses. In the face of greenhouse gas emissions, industries are seeking a new way to manage their environmental impact and reduce the carbon footprint of ...
-
Manufactured by BEA Institut für Bioenergie GmbHbased in AUSTRIA
The sampling spear meets the requirements of EN 14778 "Solid biofuels - Sampling" which defines the sampling of solid biofuels. The ALMG F20 is special suitable for the sampling of stationary, free flowing granular biomass with a nominal top size < 25 mm, especially for wood and other biomass pellets and energy grains from containers, storage rooms or ...
-
Manufactured by AB Akronmaskinerbased in SWEDEN
Akron has extensive experience with storage solutions for solid biofuel, e g wood chips and pellets. The solutions for pellets encompass welded and painted silos delivered ready for use as well as galvanised silos for assembly on site. All silos have 60° outlet hoppers and integrated filling arrangement. Larger silos are delivered with explosion relief valves as standard. Over the years, ...
-
Manufactured by Ariterm Service Oybased in FINLAND
BioComp boiler is a new generation automatic bio heating boiler. The fire box of the BioComp has a new round structure which improves heat recovery. The boiler has an excellent efficiency and its flexible structure enables the use of different burner types. Due to its high equipment level the boiler is suitable for almost all solid biofuels. Automatic cleaning of the convection ensures that ...
-
Manufactured by AB Akronmaskinerbased in SWEDEN
The Akron Bio400/Bio400+ solid biofuel heater is a cost effective and environmentally sound alternative to traditional oil- or gas-fired heaters. The heater is primarily developed for grain drying processes, but the compact design and flexible construction allows use in all types of heated air processes. Bio400 has a nominal output of 400 - 650 kW while the Bio400+ offers outputs up to 1MW. Both ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you