Wood Pellet Storage Equipment For Bioenergy Available In Africa
-
Manufactured by Biomass Silo Systemsbased in IRELAND
Our Fabric Silo Systems are designed mainly for indoor use where room height and assembly space is limited. The fabric used has an extremely high tensile strength and is breathable, allowing dust free deliveries without the need for extraction. Capacities range from 3 – 6 ton with standard footprints of 2m, 2.2m, 2.5m and 3.0m square. The galvanised steel framework is 2m in height but the ...
-
Manufactured by Biomass Silo Systemsbased in IRELAND
Our standard square footprint silos are manufactured from galvanised steel and provide a robust, reliable and cost effective method of storing your wood pellet fuel. Our Square Silo modular design allows them to be delivered to site flat packed for quick and easy assembly. Capacities range from 3 – 20 ton with standard footprints of 2m, 2.4m and 2.8m. Available in both indoor and outdoor ...
-
Manufactured by Linka Energy A/Sbased in DENMARK
With a Linka mobile plant you are ensured a turnkey heating plant, built in a large standard or custom container. A fuel container with a scraper unit is also installed, along with a custom ash container and chimney, all connected to the mobile plants main container. The main container is built in three sizes, depending on boiler size. It consists of a floor made of chequer plates, four sides in ...
-
Manufactured by Linka Energy A/Sbased in DENMARK
Linka’s steam system is largely identical with our hot water system. The difference is the design of the boiler, which is here made to produce steam. A combustion plant based on wood pellets consists of a silo, which are made from either fibreglass for outdoor installations or fibreboard for indoors. The pellets are transported from the base of the silo by an auger to the boiler room, ...
-
Manufactured by Linka Energy A/Sbased in DENMARK
A wood pellet plant consists of a silo, which are made from either fibreglass for outdoor installations or fibreboard for indoors. The pellets are transported from the base of the silo by an auger to the boiler room, directly to a cell sluice and then into the boiler’s combustion hearth. Wood pellets are produced all over Europe and are normally delivered from day to day. We are happy to ...
-
Manufactured by A.B.S. Silo- und Förderanlagen GmbHbased in GERMANY
Flexible storage solutions for pellet heating systems from 50 kW - Flexilo MAXI fabric tanks store large quantities of wood pellets without wasting space.Umweltbewusst heizen und gleichzeitig durch Fördergelder und geringe Betriebskosten Geld sparen. Das macht Pellet-Großanlagen vor allem für kommunale Einrichtungen wie Schulen, Gemeindehäuser und Kindergärten so ...
-
Manufactured by A.B.S. Silo- und Förderanlagen GmbHbased in GERMANY
The Flexilo MODULE is a special space-saving and diverse fabric silo for wood pellets.It is specially designed for spaces with low ceilings starting at 1.80 m in height and offers up to 60% more filling volume with the same floor space as that of a classical silo design. Due to its flexible module arrangement, this fabric tank can be optimally adapted to existing spaces and is thus the perfect ...
-
Manufactured by Henan Sinovo Machinery Engineering Co., Ltd (SIMEC)based in CHINA
Cooling of pellets is an indispensable process of pelletizing section. Temperature of granules from pellet mill can be reduced from 70?~90? to 3? ~5? higher than the room temperature by using the reverse-flow cooler, and to the required moisture(≤10%) for the convenience of pellet transport and ...
-
Manufactured by Twin Heat A/Sbased in DENMARK
The Twin Heat scraper system is designed for fully automatic transport of fuels such as wood shavings, wood chips and sawdust from fuel stock to burner. The scraper system is also well suited for the storage and transport of pellet fuel such as wood pellets etc. The scraper system is connected to the burner with the Twin Heat auger conveyor ...
-
Manufactured by Passat Energy ApSbased in DENMARK
BM flexible wood pellet augers can establish a direct and efficient transport between wood pellet silo and ...
-
Manufactured by A.B.S. Silo- und Förderanlagen GmbHbased in GERMANY
The weather–proof silo for the outdoor area.The Flexilo AUSSEN consists of a breathable, uncoated, high strength High-Tech-fabric.The galvanized steel construction, the jacket cover and ceiling cover which are made of a coated polyester fabric make the silo weather-resistant. In comparison to rigid silos no formation of condensation arises in our Flexilos. The filling line is fixed under ...
-
Manufactured by Linka Energy A/Sbased in DENMARK
A biomass plant based on wood pellets consists of a silo, which are made from either fibreglass for outdoor installations or fibreboard for indoors. The pellets are transported from the base of the silo by an auger to the boiler room, directly to a cell sluice and then into the boiler’s combustion hearth. When the boiler “calls” for fuel the feed procedure is activated, i.e. the ...
-
Manufactured by German Pellets GmbHbased in GERMANY
Pellet heating is in no way inferior to modern gas and oil heating systems. Pellets are delivered by lorry and deposited in a storage tank. From this tank the pellet heating systems are automatically loaded. Once charged into the heating unit, the wood pellets are electronically ignited in the heating chamber, with the burning process being automatically ...
-
Manufactured by ÖkoFEN Forschungs- und Entwicklungs Ges.m.b.H.based in AUSTRIA
The Flexilo Outdoor outdoor tank makes it possible to store pellets outdoors all year round and thus easily solves space problems when storing pellets. Inside, a Flexilo fabric tank stores pellets in a space-saving way, protected from moisture and at the same time cost-effective. On the outside, a waterproof and UV-resistant foil protects the entire construction. The kit comes with a base plate. ...
-
Manufactured by Ulma ABbased in SWEDEN
Air Move 1500 is a fully automatic transportation of pellets with built-in daily storage Now the time is gone with carrying pellet bags from bulky storage rooms in the garden. Now you just press the button and pellets will be put in with careful air feeding. Our vacuum suction apparatus easily handles up to 50 meters from bulk storage to pellet burner. The screw that comes with it is also ...
-
Manufactured by GRANDEGbased in LATVIA
Designed and manufactured by a unified standard, reducing the production costs to a minimum. Specifically suited for the installation and usage of GRANDEG pellet heating boilers, as well as the storage and automatic transportation of pellets. Manufactured industrially, carefully insulated, designed by the detail, equipped with modern systems, heatable buildings, adjusted to the client's needs and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you