5 products found
AEREON, part of Cimarron group Products
-
Standard Flares for O&G Production
With the rapid growth of oil and gas production in the North American shale plays and other areas, AEREON has answered the call with a series of 40CFR60.18 and QuadOa compliant standard flares and combustors that deliver the high performance and rapid delivery you need at very economical price points.
-
AEREON - Model Utility Series - Flare Systems
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility flares therefore, do not require auxiliary gas streams or assist air; two mediums normally used to improve smokeless capacity. These flares are typically ...
-
AEREON - Model Cyclone Series - Air-Assist Flares
AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own secondary riser and is distributed at the flare tip through a proprietary AEREON Starfire burner tip. Upon mixing at the flare tip, the high-pressure air flow causes turbulence in the ...
-
AEREON - Model Inferno Series - Gas-Assist Flares
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. Gas-assist flares are typically utilized when you have a ...
-
AEREON - Model Momentum Series - Non-Assisted Flares System
AEREON's Momentum Series of non-assist flares provide smokeless performance without the need of additional air-blowers or assist gas for both high pressure and low pressure gas streams. Leveraging the increased momentum of gas that is passed through a simple nozzle or restricted opening, the waste gas intimately mixes with the ambient air and provides for smokeless operation while meeting all Quad O and 40 CFR 60.18 ...
-
AEREON - Model Ghost Series - Enclosed Combustors
With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or VRUs. When enclosed flames and smokeless combustion are required for low pressure tank vapors, or other VOC destruction applications, AEREON's ...