13 products found
AEREON, part of Cimarron group Products
-
Custom Flares and VCUs for Onshore & Offshore
From basic utility flares to more complicated steam-assist, multi-point ground, or demountable derrick flares, AEREON offers a wide range of products expertly engineered to address a wide variety of gas-stream and design conditions.
-
AEREON - Utility Flares
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility flares therefore, do not require auxiliary gas streams such as steam or air; two fluids normally used to improve smokeless capacity. These flares are typically accompanied by a Flare Industries ...
-
AEREON - Air-Assist Flares
Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving mixing, and ultimately combustion efficiency. These flares generally dispose of heavier waste gases which have ...
-
AEREON - Gas-Assist Flares
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste gas stream, improves combustion efficiency and smokeless performance. These flares generally dispose of heavier waste gases which have a greater tendency to smoke and are favored in applications where ...
-
AEREON - Steam Assist Flares
Steam assisted flares are flares designed to dispose of heavier hydrocarbon gases which have a tendency to smoke. In order to prevent smoke formation, steam is injected into the waste stream using peripheral steam rings, center stream spargers and/or inner induction tubes. Steam flares are used in applications where high pressure steam is available on site. Steam flares are typically found in downstream applications where high efficiency combustion of ...
-
AEREON - Model Mach-1 - Fixed Orifice Sonic Flares
Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and can be placed at lower, less visible elevations, allowing for a more cost-effective flaring solution. Mach-1 sonic flare ...
-
AEREON VariMach - Variable Orifice Sonic Flare
The VariMach sonic flare tip features spring-actuated variable sonic nozzles to allow the exit area to vary with pressure, ensuring constant sonic velocity of the exiting waste gas. This industry proven technology guarantees sufficient inspiration of air to ensure 100% smokeless combustion and infinite turndown. Radiation levels are also minimized throughout the entire range of flow, yielding shorter stack heights and reducing material costs. ...
-
AEREON - Model MPGF - Multi-Point Ground Flare Systems
When ample real estate is available, multi-point ground flare (MPGF) systems are an economical approach to enclosed (hidden) and smokeless combustion of large amounts of process gas. By inducing gas through a large array of high-pressure burning points/burners, smokeless combustion can be achieved with high turndown, while concealing all radiation within the walls reducing exposure to personnel. MPGF systems provide smokeless capacity and no requirement ...
-
AEREON - Model VCUs - Vapor Combustion Unit
As an alternative to recovery, hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a device known as a combustor can be successfully used as a safe and economical method of controlling vapors from the handling, storage or loading of volatile liquid hydrocarbons or ethanol when recovery of the vapors is not a viable ...
-
AEREON - Model Triton - Water Injected Sonic Flares
Triton sonic flare technology allows for safe, efficient and smokeless flaring at elevated oil and gas production rates by injecting sea water into the flame envelope. High pressure sea water injection reduces flare emissions, helps minimize overall radiation levels from the flame, abates combustion noise, and preserves flame characteristics during high wind events. The Triton sonic flare is best-suited for offshore applications involving high pressure ...
-
AEREON - Flame Ring Flares
Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare without the use of assist gas or a properly designed flame ring. Flare Industries’ industry-proven Flame Ring Flare Technology is recommended in low-BTU applications such as those involving large quantities of CO2 ...
-
AEREON - Chimera Liquid Burner
The Chimera was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for various onshore applications that require high destruction efficiency of liquid hydrocarbons. When oil is flared, a high pressure media such as an air, gas, or steam is required to mechanically atomize the heavy hydrocarbons for proper and stable ...
-
AEREON - Peacock Liquid Burner
The Peacock Burner was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for well testing operations and have been used in applications in the Gulf of Mexico and Arabian Gulf. When only oil is flared, a high pressure air or gas source is required to provide mechanical atomization which ensures the mixture is a fine mist as it exits the burner nozzle. This particular burner ...
-
AEREON - Pit Flares
Pit Flares are generally selected and designed in order to combust a mixture of vapor and liquid from a single source. While most often designed to operate non-smokelessly, through use of Flare Industries’ various Pit Flare technologies, smokeless operation can often be achieved. The flare pit (or “Burn Pit”) is usually constructed of an excavation, lined with a non-combustible lining of rock or refractory material. Often coupled with a ...