10 products found
Chart Industries Products
-
Tuf-Lite- Fans
-
Tuf-Lite - Model I - Fans
Tuf-Lite are hand-laid-up molded fan blades with either epoxy resin or a proprietary vinyl ester resin that is specifically formulated for Hudson. Each blade has a different fiberglass configuration that is as a result of 60+ years of know-how and continuous improvement and innovation. Additionally, Tuf-Lite II and Tuf-Lite III include a UV protective coating and our proprietary Tuf-Edge embedded leading edge protection. Due to this design, Tuf-Lite are ...
-
Tuf-Lite - Model II & III - Fans
Tuf-Lite II was created in 1984 and Tuf-Lite III in 2004. Both blade families are manufactured in Texas. Tuf-Lite II and Tuf-Lite III have their own air-foil designs which provide different performance characteristics. Contact our engineers to determine the best option for your needs. Tuf-Lite II is a two piece fan blade and Tuf-Lite III is a one piece fan blade. Both types are constructed of vinyl ester resin developed specifically for Hudson. Both ...
-
Tuf-Lite - Model III KW - Fans
Tuf-Lite III KW is in a class of its own. The KW is the most versatile and highest performing fan in its class. The KW is a wide chord fan available from 11’-20’ in diameter. Due to its innovative design, it can be used to provide more air flow that is unmatched by any other fan, can be used for lower noise applications, is energy efficient, and is as reliable as all Hudson fans. The KW can be used in any 11’-20’ application ...
-
Fin-Fan- Air-Cooled Heat Exchangers
-
Induced Draft - Air-Cooled Heat Exchangers
The induced draft configuration positions the fans above the exchanger bundle. High velocity hot air exhaust reduces the risk of hot air recirculation, and plenums protect the exchanger bundle from the elements. Induced draft exchangers are well suited for lower process temperatures and for applications where hot air recirculation is a ...
-
Forced Draft - Air-Cooled Heat Exchangers
In the forced draft configuration, fans and mechanical components are positioned below the exchanger bundle. Because the fans are in the cool air stream, horsepower requirements are slightly lower and maintenance personnel are protected from high exit air temperatures. Forced draft exchangers are well suited for high-temperature ...
-
Winterized - Air-Cooled Heat Exchangers
Air-cooled heat exchangers in very cold climates and/or involving viscous or high pour-point fluids may require winterization for freeze protection and process temperature control. To prevent process fluids from freezing and to protect the exchanger, the exchanger is equipped with automatic louvers and recirculation chambers to mix warm exhaust air with cold inlet air and plenum heaters for ...
-
Hudson - Large Fan Field Erected Units
Our large fan field erected units are available in bay sizes up to 70 feet by 54 feet and fan diameters up to 36 feet. Our modular design and construction expertise allows for fast and dependable field erection. Benefits of the large fan design ...
-
Compression Cooling
-
Hudson - Model VCF - Vertical Forced Draft Compression Cooler
Fan diameter from 48” to 168”. Fan placed vertically with vertical air discharge . Typically engine driven but can be modified for electric motor (Sections placed vertically and sloped in center of unit) . Several optional features available . Typical compressor package HP range 100 – ...
-
Hudson - Model VCI - Vertical Induced Draft Compression Cooler
Fan diameter from 48” to 168”. Fan placed vertically with vertical air discharge . Typically engine driven but can be modified for electric motor (Sections placed vertically in front of unit). Several optional features available . Typical compressor package HP range 100 – ...
-
Hudson - Model HF - Forced Draft Engine Drive Compression Cooler
Fan diameter from 60” to 144”. Single or multiple fans. Fans placed vertically with vertical air discharge. Horizontal sections placed on top of unit. Several optional features available. Typical compressor package HP range 100 – ...