For the majority of the licensors of sulphuric acid processes represented on the market, CS builds burners and combustion chamber systems for the combustion of liquid sulphur, with or without a downstream waste heat boiler.
Hydrogen is the fuel gas with the highest burning rate and flame temperature and was already a fuel used for energy by industry before the power to fuel trend. Often as a by-product from chlorine gas production or conventional H2 steam reformers, where it is "contaminated" with other hydrocarbons, it is used to heat convection reformers. CS has been supplying burner systems for various concentrations of H2 for all types of hydrogen production plants for over 10 years. Hydrogen has also...
The entire chemical, petrochemical and pharmaceutical industry produces huge amounts of liquid residues that can be thermally recycled. In response to the principle of zero waste emission, these are increasingly being converted into thermal energy directly where they are produced. This is usually done in adiabatic combustion chamber systems with subsequent waste heat utilisation. Industrial parks also have special hazardous waste incineration plants, operated by globally active waste management companies, in...
Hot process gas is required for the start-up or running of many production plants, in the refinery as well as in petrochemical plants and in the minerals industry. CS can offer hot gas generator systems for almost all applications. Many years of experience in the firing sector, as well as tailor-made solutions, which are tested for the most complex applications by using CFD, make it possible to supply optimum complete systems for the customer. No matter whether the process gas has to be provided at 100°C,...
During the combustion of organic fuels with a high nitrogen content, NOx concentrations of up to several thousand mg or ppm are produced during a normal combustion process. The most efficient primary measure for NOx reduction is the staged combustion, where the combustion air is applied in two or more stages, depending on the application.