20 products found
Datum Electronics Ltd Products
-
Torque Sensors, Meters and Transducers
-
Custom Industrial Torque Sensors
Datum Electronics are able to provide both modular and custom designed torque and rotary strain measurement solutions, which can be complete as one off or as fully integrated OEM solutions. In many cases, it is better to use an existing shaft or test rig and use custom industrial sensors instead. This process reduces the cost of fitting a conventional torque transducer and it improves the torque measurements, taken by maintaining the dynamics of the ...
-
Shaft Torque Sensors & Meters
We also offer rotary power sensors, rotary torque sensors and torque meters that are capable of measurements above our standard range of 20,000NM to meet the needs of our customers within a commercial environment. Our standard torque sensor range incorporates the measurement of torque up to 60,000Nm, these provide solutions to most test and monitoring ...
-
Model FF425 - Non Contact Flange Torque Sensor
Contactless Torque Transducers with flange couplings at either end with measuring ranges from 0-100Nm up to 30kNm as standard (bespoke sensors up to 16MNm) for a variety of in line static and rotary torque measurement applications. The Datum Electronics Series FF425 non contact flange torque sensor and FF410 torque sensors have been designed to fit easily inline with any drive train or test rig using standard DIN size couplings. With Flange ...
-
Model M425 - Rotary Torque Sensor and Rotational Torque Transducer
M425 rotary torque sensor with keyway shafts offers high accuracy of 0.1% and torque measurement range from 0-10Nm up to 60,000Nm as standard. It’s an inline rotation torque transducer, widely used for motor, gearbox and pump torque testing. Using a highly-accurate non-contact technique, the Datum M425 Rotary Torque Transducer and Torque Meter represent an ultimate torque sensor for anyone looking to measure torque, power, and speed with high ...
-
Model RS425 - Contactless Torque Transducer
These contactless Torque Transducers are not limited by operational speeds, can fit any shaft and capable of measuring torque from 1nm and up to 500knm, providing highly accurate and reliable torque measurement in many ...
-
Bolt-on Strain Measurement Sensors
-
Model 460 Series - 2-Hole Bolt-On Strain Gauge Sensor
Our series 460 2-hole bolt-on sensor is not only an essential product for measuring micro-straight, but it can also become an integral part of a strain monitoring system for using in harsh environments. Datum Electronics offers two types of multi-element strain gauge bolt-on strain sensors that have been developed to provide a rugged and robust production sensor with the benefits, associated with a complex strain gauge installation. They have been ...
-
Model 460 Series - 3-Hole Bolt-On Strain Gauge Sensor
The series 460 3-hole bolt-on strain sensor has a unique design, eliminating the temperature effect on bending and strain of the application, and. can work in almost any environment and in any weather. Datum Electronics offers two types of multi-element bolt-on strain sensor that have been developed to provide a rugged and robust production sensor with the benefits associated with a complex strain gauge installation. The bolt-on strain sensors have been ...
-
Custom Bolt-On Strain Sensors
Our custom bolt-on strain gauge sensors are designed and manufactured to your application, based on your drawings and specifications, including all types of output formats. Ideal for dynamic load monitoring, capable of measuring and monitoring axle stress and weight with high accuracy. Do you have an application for strain gauge measurement that requires a quick and simple installation, repeatedly, in multiple locations? Perhaps you need a sensor with ...
-
Shaft Power Measurement Solutions
-
Datum Electronics - Marine Shaft Power Meter System
Datum’s Marine Shaft Power Meter Systems are developed to provide real time and ongoing power monitoring data on propulsion shafts, thrusters and diesel generators. These devices are commonly used for fuel economy monitoring and equipment maintenance planning programs and can be used in conjunction with our
-
Datum Electronics - Model 420 Series - Naval Shaft Power Meter Systems
Series 420 Naval Shaft Power Meter System has passed rigorous MOD and MIL testing programmes and is able to provide an accurate tool to monitor propeller shafts on ships by measuring shaft speed, torque and power. Datum Electronics Series 420 Naval Shaft Power Meter System provides an accurate tool for naval ship performance monitoring. It is able to assess and monitor propeller shafts on naval ships by measuring shaft speed, torque and ...
-
Model SPMK - Shaft Power Measurement Kits
SPMK Systems are undergoing improvements to match our Type Approved Shaft Power Meter System (SPM) and have a longer readiness date, please discuss with sales. Shaft Power Measurement Kits are available in two formats, the standard and the compact kit. The compact kit is ideal for single day trials, while the standard one is used for long duration trials of between 30-60 days. Datum Shaft Power Measurement Kits open the opportunity to collect torque, ...
-
Wind Turbine Efficiency, Condition & Vibration Monitoring System
Monitoring Wind Turbine Efficiency: Datum’s Wind Turbine Condition Monitoring System is suitable for both offshore and onshire wind turbines. It is designed monitor turbine efficiency, detect and prevent failures of generators, gearboxes and rotor bearings through highly accurate real-time condition and vibration monitoring. Attached to the driveline of a wind turbine, e.g. between gearbox and generator, our dynamic torque, shaft bending and power ...
-
Datum Hawk AI-Enabled Condition Monitoring
The Datum Hawk project, developed by Datum Electronics in partnership with Strathclyde University’s renowned Marine Engineering department, represents a change in the way that marine vessels will operate planned maintenance across engine rooms across engine rooms, helping improve vessel efficiency and optimisation. Datum Hawk empowers engineers to adopt condition-based maintenance ...
-
PTO Shaft Power Monitoring System
-
Tractor PTO Shaft Monitoring System
Farm Smarter with Agricultural Equipment Monitoring. Our Power Take Off Shaft Torque & Power Monitoring System, part of Datum’s Smart Farming Solutions, will monitor and log the torque, shaft speed and transmitted power accurately when testing new systems driven from all standard PTO Shafts. Datum Electronics Series 425 ConnectTractor PTO Drive Shaft Torque and Power Monitoring System will monitor and log the torque, shaft speed and transmitted ...
-
Helical Screw Pile Torque Monitoring System
-
Auger Hawk - Model C441 - Helical Screw Pile Torque Sensor
A wireless completely contactless highly accurate torque sensor. Confidently measure and verify heavy duty torque for insertion of helical screw piles. The Auger Hawk C441 helical screw pile torque, thrust, angle rpm measurement system is a wireless completely contactless highly accurate torque sensor for those who need to confidently measure and verify heavy duty torque for insertion of helical screw piles. For 8 years now, The C441 Helical Screw Pile ...
-
Load Cell Amplifiers 4-20mA / 0-10V / mV/V
-
Model Type 131 0-10V - Analogue Load Cell Bolt-on Amplifier Signal Conditioner
4-20mA Load Cell Amplifier. The Type 131 Load Cell Amplifier is designed to interface to a full bridge strain gauge based bolt-on load cell or similar sensor, allowing use of the resultant data in a more efficient and productive way. This model load cell amplifier, Type 131, can be calibrated to provide a 4-20mA output for a fixed load range from the ...
-
Model Type 132 0-10V - Analogue Load Cell Bolt-on Amplifier Signal Conditioner
0-10V Load Cell Amplifier: The Type 132 Load Cell Amplifier is designed to interface to a full bridge strain gauge based bolt-on load cell or similar sensor, allowing use of the resultant data in a more efficient and productive way. This model load cell amplifier, Type 132, can be calibrated toprovide a 0-10V output for afixed load range from the ...
-
Model Type 133 - Bipolar Output Load Cell Amplifier
The Type 133 Load Cell Amplifier is designed to allow the customer to configure and amplify analogue outputs to several combinations of input ranges and on current (mA) or voltage (VDC) outputs. Use with Datum’s bolt-on sensors to amplify their signals.
Others
Datum - Model DUI - Universal Torque Sensor Interface
Datum Electronics specifically designed the Universal Torque Sensor Interface which accepts serial data, displaying the output data and a wide range of additional analogue and digital outputs, s 4-20mA, +/-5Vdc, 0-5Vdc, +/-10Vdc, 0-10Vdc as well as RS232/485 serial data. The Datum Universal Interface (DUI) interfaces with all our rotary, static, reaction, digital torque sensors and torque transducers, as well as shaft power measurement solutions. The ...
EEXI Monitoring
EEXI - Model SHaPoLi - Shaft Power System
We have developed a shaft power limitation (SHaPoLi) EEXI Shaft Power System, providing the necessary features and functionality to comply with the MARPOL Annex VI, MEPC.335(76) EEXI regulations. Our system uses a Shaft Power Acquisition Module to constantly display, monitor and record propulsion shaft power to ensure compliance ...