10 products found
E. J. Bowman (Birmingham) Ltd Products
-
Heat Exchangers
-
Marine Heat Exchangers
There are three methods employed for water-cooled marine petrol and diesel engines they are Direct cooling, Heat exchanger cooling and Keel ...
-
Exhaust Gas Heat Exchangers
Bowman Exhaust Gas Heat Exchangers are designed to remove heat from the exhaust gas side of engines and transfer it to the water circuit. These Exhaust Gas units therefore enable waste heat recovery, and can be used on Cogeneration/Combined Heat and Power (CHP) equipment up to 1 ...
-
Header Tank Heat Exchangers
Bowman Header Tank Heat Exchangers were designed originally for marine engines, but they are also widely used for various land based duties, such as engine testing and development work, generator sets, fire pumps and combined heat and power systems (CHP). Our units incorporate a quiet zone header tank with a special de-aeration feature and a pressurised filler cap. The removable tube stack is held in position by ‘O’ rings and is free to expand ...
-
Model EC80-5113-1 - Swimming Pool and Spa Heat Exchangers
E J Bowman is one of the UK’s largest manufacturers of Swimming Pool & Spa Heat Exchangers. There are two ranges of Bowman Swimming Pool Heat Exchangers, one for use with boilers and the other for use with Solar Panels/Heat ...
-
Charge Air Coolers
Bowman Charge Air Coolers are ideal for cooling marine engines as well as various land based engines such as gen-sets, co-generation equipment and fire pumps. They are also suitable for facilitating engine test and development programs. Additional Charge Air Coolers designed for specific engines are also available please contact our sales office for further ...
-
Stainless Steel Heat Exchangers
Bowman Stainless Steel Heat Exchangers are particularly useful in bad water environments caused by pollution or from the chemicals used to counter it. They can also be used to overcome the corrosive nature of some synthetic oils and ...
-
Brazed Plate Heat Exchangers
Our Inline Brazed Plate Heat Exchangers have been designed as a cost effective alternative to our shell and tube types. They consist of numerous 316 stainless steel heat transfer plates, two outer covers and four connections copper vacuum-brazed together to form an integral unit. Unlike other brazed plate heat exchangers, ours have a unique internal flow arrangement, which enables the inlet and outlet connections to be axially inline. This means that they ...
-
Oil Coolers
-
Hydraulic Oil Coolers
Hydraulic Oil Coolers are suitable for heat transfer fluids, lubricating and quenching oils. They are high quality products incorporating the best materials and the latest technical features. The tube bundle is fully floating so that thermal stresses are minimised and can easily be removed should cleaning be necessary. Bowman has added to its range of hydraulic oil coolers with the launch of the new 'RK hydraulic oil cooler' shown ...
-
Hydraulic Marine Oil Coolers
We manufacture a variety of oil coolers, heat exchangers, water cooled manifolds, charge air coolers for use on marine engine cooling. Most Bowman marine products are fitted with bronze covers which are highly corrosion resistant and therefore suitable for use with sea water. Some of the smaller units are fitted with neoprene end covers which can fit directly into the sea water ...
-
Gearbox Oil Coolers
Bowman Gearbox Oil Coolers are designed for use on small marine transmissions. They have the same cupro nickel tubes as our larger EC to PK range of oil coolers and therefore have the same long life expectancy. The sea water connections are neoprene mouldings making them simple and easy to install and should cleaning be necessary, they can be removed using only a ...