7 products found
E. J. Bowman (Birmingham) Ltd Products
-
Heat Exchangers
-
Marine Heat Exchangers
There are three methods employed for water-cooled marine petrol and diesel engines they are Direct cooling, Heat exchanger cooling and Keel ...
-
Exhaust Gas Heat Exchangers
Bowman Exhaust Gas Heat Exchangers are designed to remove heat from the exhaust gas side of engines and transfer it to the water circuit. These Exhaust Gas units therefore enable waste heat recovery, and can be used on Cogeneration/Combined Heat and Power (CHP) equipment up to 1 ...
-
Header Tank Heat Exchangers
Bowman Header Tank Heat Exchangers were designed originally for marine engines, but they are also widely used for various land based duties, such as engine testing and development work, generator sets, fire pumps and combined heat and power systems (CHP). Our units incorporate a quiet zone header tank with a special de-aeration feature and a pressurised filler cap. The removable tube stack is held in position by ‘O’ rings and is free to ...
-
Model EC80-5113-1 - Swimming Pool and Spa Heat Exchangers
E J Bowman is one of the UK’s largest manufacturers of Swimming Pool & Spa Heat Exchangers. There are two ranges of Bowman Swimming Pool Heat Exchangers, one for use with boilers and the other for use with Solar Panels/Heat ...
-
Charge Air Coolers
Bowman Charge Air Coolers are ideal for cooling marine engines as well as various land based engines such as gen-sets, co-generation equipment and fire pumps. They are also suitable for facilitating engine test and development programs. Additional Charge Air Coolers designed for specific engines are also available please contact our sales office for further ...
-
Stainless Steel Heat Exchangers
Bowman Stainless Steel Heat Exchangers are particularly useful in bad water environments caused by pollution or from the chemicals used to counter it. They can also be used to overcome the corrosive nature of some synthetic oils and ...
-
Brazed Plate Heat Exchangers
Our Inline Brazed Plate Heat Exchangers have been designed as a cost effective alternative to our shell and tube types. They consist of numerous 316 stainless steel heat transfer plates, two outer covers and four connections copper vacuum-brazed together to form an integral unit. Unlike other brazed plate heat exchangers, ours have a unique internal flow arrangement, which enables the inlet and outlet connections to be axially inline. This means that ...