3 products found
Ennox Biogas Technology GmbH Products
-
Gas Storage
The gas production of biogas plant, sewage or landfill plant can be impacted by volume fluctuations. The same applies for the gas utilization. For compensation and optimization of these peaks the so-called gas storages are used. Depending on the construction and operating mode, a distinction is made between an integrated and external biogas storage respectively between a low,-middle and high pressure storage. Ennox offers two different kind of storage systems, the gas storage without pressure and the double membrane storage. For special applications it is also possible to get a customized solution.
-
Ennox NOXstore - Model DM - Double Membrane Gasholder
The double membrane gasholder is made up of two spherical shaped polymer membranes (other forms are also possible), lying one inside the other. The external membrane is maintained in a stable form with the use of an air blower. The external membrane then serves as protector for the inner membrane against the influence of environmental factors such as wind or snow. The biogas is contained within the inside polymer membrane. The pressure generated by the ...
-
Ennox NOXstore - Low Pressure Gasholder
For the temporary storage of bio or sewage gas in a zero pressure environment conforming to the technical norms (DVGW, ÖWAV, SUVA, safety regulations for agricultural biogas systems SWA…). The gas holders are available in various storage capacities ranging from 10 – 7,500m3. The storage of the biogas/sewage gas is made in a cylindrical gas bag which is freely hung in a building or silo. The silo serves in this case as an effective ...
-
Ennox - Model RAV - Pressure Increase Blower
Digesters and biogas reactors are normally designed and built to cover relatively low system pressures due to cost implications. In order to carry out effective cleaning of the system, operation of a consumer or transfer of the biogas, it is necessary to increase the operating pressure in the ...