7 products found
GMT Equipment Products
-
GMT Products - Grapple Saws
Do you need to saw trees with less manpower but still work quickly and efficiently? With the grapple saw from GMT Equipment, you can saw, fell, prune and transport trees with one machine. The GMT grapple saws enable smaller sections of a tree to be removed and to be cleared away immediately. Therefore, directly off the tree into a container or chipper without touching the ground and causing damage by falling wood. This means saving up to 60% in man-hours and materials. For over more than 10 years the GMT tree felling equipment is the best solution for safe and efficient pruning and removal of trees within cities and along roads, railways and waterways.
-
GMT - Model 035 - Grapple Saw
Grapple saws GMT035 and GMT050 enable trees to be removed in sections. Flexible, tension-free grasping, sawing and controlled felling. These grapple saws have proven themselves for more than 10 years in a variety of situations. The GMT035 has a relatively low weight, only 245 kg, and is therefore most suitable for a low-weight crane from approximately 5 tons/meter. With this felling head you can cut trees up to a cutting diameter of 14 ...
-
GMT - Model 035 TTC - Grapple Saw
The GMT035 TTC and GMT050 TTC are almost identical to the GMT035 and GMT050, but feature the patent pending TTC system. TTC stands for Total Tree Control and these grapple saws have been specially developed to make it possible to hold tree parts after the moment of sawing. Not only is the tilt cylinder of the grapple blocked, but so is the movement in all directions in the cardanic suspension between rotator and crane. That means: flexible installation ...
-
GMT - Model 050 - Grapple Saw
The GMT050 grapple saw is the ideal tree felling equipment for cranes with approximately 10 tons/meter. With a maximum cutting diameter of 20 inches, you can fell almost any tree. Easy installation of the grapple saw within 2 hours and no additional hydraulic lines or electric control cables are required because of the patented valve ...
-
GMT - Model 050 TTC - Grapple Saw
The GMT035 TTC and GMT050 TTC are almost identical to the GMT035 and GMT050, but feature the patent pending TTC system. TTC stands for Total Tree Control and these grapple saws have been specially developed to make it possible to hold tree parts after the moment of sawing. Not only is the tilt cylinder of the grapple blocked, but so is the movement in all directions in the cardanic suspension between rotator and crane. That means: flexible installation ...
-
GMT Products - Quick Coupler
Want to save time, costs and manpower? For greater flexibility, combine the GMT Equipment grapple saw with the Quick coupler GMT C10. The smart construction means you don’t have to adapt your machine. You are able to easily switch between the grapple saw and other equipment on your crane.
-
GMT - Model C10 - Quick Coupler
The GMT C10 quick coupler allows you to quickly and easily switch between the grapple saw and other equipment on your crane. The GMT quick coupler has a unique, robust design and is mounted between the rotator and ...
-
GMT Products - Fly Jib
With a GMT Fly Jib you can easily install a GMT grapple saw on the knuckleboom crane of your truck or on your telehandler. This crane extension is needed to ensure free movement and the 360 degree rotation of the grapple saw, when the crane is in an upright position. In addition, the jib provides useful extra reach.
-
GMT - Jib for Telehandlers
The GMT Jib for a telehandler makes it easy to install a GMT grapple saw onto your rotating telehandler. The jib has been specially designed for tree work: all hoses and specific components are well protected when moving through the canopy of a ...
-
GMT - Folding Jib
When utilising the GMT035 (without TTC), the GMT Folding Jib might be an interesting option. It allows you to disconnect the grapple saw, rotator and link in one go with a quick connector. The Fly Jib can then easily be retracted into the upper section of the ...