We couldn't find any biomass cogeneration suppliers or service providers located in Virginia
Here is a list of companies serving Virginia
Biomass Cogeneration Manufacturers, Suppliers & Companies Serving Virginia
-
Manufacturerbased in Nalles/Nals (BZ), ITALY
Eric-Son supplies highly efficient biomass boilers for the production of warm water, hot water, low pressure steam and high pressure steam. Eric-Son has been involved for more than 30 years in the design and construction of turnkey biomass fired ...
Eric-Son - Biomass Cogeneration Plants (Steam Turbines)
Eric-Son supplies highly efficient turnkey biomass cogeneration plants with steam turbines for the simultaneous production of power and heat for industrial processes or district heating. Additionally, by using an ...
CONTACT SUPPLIER -
Engineering service providerbased in Saint-Laurent, QUEBEC (CANADA)
Lakson International Development is an engineering company that specializes in the biomass heating system, energy, and environment protection sector. Since its founding in 1998, Lakson has pioneered a number of solutions for: The valorization of ...
Biomass Cogeneration Services
Our heating solutions can be used in a cogeneration process, to produce a combination of heat and electricity from biomass. This type of solution is extremely energy-efficient and is of great benefit to ...
CONTACT SUPPLIER -
Manufacturerbased in Grantorto (PD), ITALY
ESPE was founded in Padua - Italy, in 1974. Since then, our Company has steered a path of continuous growth in the renewable energy sector. ESPE designs and installs reliable green energy systems: wind turbine generators, cogenerators and biomass ...
ESPE - Model CHiP50 - Biomass Cogenerator
The experience gained since 1974 in design and construction of electrical systems and industrial automation has benn essential in building the CHiP50, the cogenerator designed for small and medium sized businesses that need ...
CONTACT SUPPLIER -
Manufacturerbased in Neckarsulm, GERMANY
We develop solar PV inverters in the power class of up to 100 kilowatts at two locations in Germany: at the headquarters in Neckarsulm and also in Kassel. The production for the European market takes place exclusively in Neckarsulm. In that way, not ...
-
Manufacturerbased in Zhangjiagang City, CHINA
DHB Boiler is a manufacturer of A-class boilers (power plant boiler, industrial boiler, HRSG boiler, waste-to-energy boiler, biomass boiler etc.) and correlated pressure parts. We supply boiler design, fabrication, installation, repair, and ...
-
Manufacturerbased in Thimister, BELGIUM
DRYER ONE ™ drying technology can process a wide range of forest and agricultural products. The material to be dried is spread on a rotating disc which is traversed by a flow of hot air. After a complete rotation, the partially dried material is ...
-
Manufacturerbased in Vancouver, BRITISH COLUMBIA (CANADA)
Inproheat Industries Ltd. is a premier industrial energy solutions provider to industry. With over 60 years of experience, we provide a diverse range of top-tier refractory and foundry products to the foundry and steel-making sectors in western ...
-
Service providerbased in Prato, ITALY
Cellini GTC has a 'technologic: base of of planning, management and control of all the processes related to the implementation of big comission orders, from the planning to the testing and maintenance of the works done. Cellini GTC has then found a ...
-
Manufacturerbased in Brooklyn, NEW YORK (USA)
Beltran Technologies is a leader in advanced gas cleaning and air pollution control for a broad spectrum of industrial processes and emissions requirements. Beltran's wet and dry Electrostatic Precipitators represent the leading edge of gas cleaning ...
Beltran - Biomass Gasification Technology
Beltran's biomass gasification technology converts locally-sourced organic wastes into clean, efficient energy and valuable co-products, with dramatic reductions in CO2 and pollutant emissions. The Beltran Biomass ...
CONTACT SUPPLIER -
Technologybased in Regensburg, GERMANY
We develop solutions for sustainable energy supply from biogenic residues for electricity, heating and cooling. We turn innovative trends into sustainable, economical solutions. Our biomass combined heat and power plants (CHP) use solid, renewable ...
-
Manufacturerbased in Tokyo, JAPAN
Shin Nippon Machinery Co., Ltd. will bring a new excitement and an affluent life to people around the world through continuous innovations in technology. World demand for energy is projected to continue its growth, while at the same time rigorous ...
Shin Nippon - Model Type C - Condensing Multistage Steam Turbine
With turbine exhaust pressure a vacuum, the condensing multistage turbine is a high-efficiency, high output model capable of fully converting the thermal energy of steam to velocity, without loss. This series of products are known as 'multistage' ...
CONTACT SUPPLIER -
Software vendorbased in Madison, WISCONSIN (USA)
TRNSYS (pronounced 'tran-sis') is an extremely flexible graphically based software environment used to simulate the behavior of transient systems. While the vast majority of simulations are focused on assessing the performance of thermal and ...
TRNSYS - Transient System Simulation Tool
TRNSYS (pronounced 'tran-sis') is an extremely flexible graphically based software environment used to simulate the behavior of transient systems. While the vast majority of simulations are focused on assessing the performance of thermal and ...
CONTACT SUPPLIER -
Manufacturerbased in Viersen, GERMANY
Young, modern, future-oriented – building on over 70 years of industry experience and in-depth expertise in cast iron and steel. As a sister company of WEGUSTA Holland BV and strategic partner of WEGUSTA GmbH (Westdeutsche Guss- und ...
STEECO - Incineration Plants
The power plants of our world are and will remain the mainstays of our energy production. Above all, however, the focus is increasingly on waste incineration plants as well as biomass cogeneration plants. In order ...
CONTACT SUPPLIER -
Manufacturerbased in Zevio – Frazione Santa Maria, ITALY
BSP is a leading European supplier of storage facilities specialized into all extraction and handling process. B.S.P. Engineering designs, produces and installs, all over the world, silos for solid bulk tanks for liquid, extraction and handling ...
BSP - Heat Storage Tank
Dryer & solutions for the intermediate storage of heat from waste heat or renewable energies. The storage of heat from biogas plants, biomass cogeneration plants or other heat sources is an important ...
CONTACT SUPPLIER -
Service providerbased in Rueil-Malmaison, FRANCE
AIT-STEIN imagines, designs, manufactures and installs turnkey energy optimisation and recovery units. With more than 35,000 solutions installed in 120 countries around the world, AIT-STEIN has become a key European player in energy recovery and ...
Producing Energy and Reducing Services
AIT-STEIN‘s expertise enables it to provide tailor-made energy production solutions for industrial companies and local authorities. It offers a very wide range of heat or steam production systems (solar, biomass, ...
CONTACT SUPPLIER -
Manufacturerbased in Gummersbach, GERMANY
Schroeder Valves is a global specialist in designing and manufacturing protective pump fittings based in Gummersbach, Germany. For more than 60 years we have been producing superior quality valves for refineries and power plants, the chemical ...
Development & Design Services
Schroeder valves have always been energy efficient products – after all, you need no auxiliary power supply – in recent years our fittings have also been used in facilities for sourcing or processing renewable energies, such as solar ...
CONTACT SUPPLIER -
Professional associationbased in Portland, MAINE (USA)
The Biomass Thermal Energy Council (BTEC) advances the sustainable use of wood and agricultural biomass for clean, efficient heat and combined heat and power to meet America's energy needs and strengthen local economies. BTEC is an association of ...
-
Technologybased in Limassol, CYPRUS
A company based in cyprus under the guidance of a team of engineers, economists and lawyers expert in solar and wind energy and generally renewable energy systems. Import, study, construction, maintenance and financial analysis of energy projects. ...
-
Manufacturerbased in Wardenburg, EGYPT
LiPRO Energy is a manufacturer and designer of “turnkey solutions” for biomass power plants. We aim to provide the operators with a holistic concept, from project planning to manufacture and full-service operation of the LiPRO CHP plants. Our aim at ...
LiPRO - Model HKW50 and HKW50+ - Wood-fired Cogeneration Plant (CHP)
The LiPRO wood-fired cogeneration plant (CHP) is a biomass CHP plant. An innovative conversion plant, which is powered by renewable energy. The wood cogeneration plant aims to convert woody ...
CONTACT SUPPLIER -
Manufacturerbased in Barcelona, SPAIN
EQTEC is an engineering company specialized in the design, EPC construction as well as the maintenance and operation of energy plants that apply different technologies based on efficient, reliable and sustainable solutions to achieve its clients' ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you