Cogeneration Engine Manufacturers
-
Manufacturerbased in Ostrava–Mariánské Hory, CZECH REPUBLIC
We develop electronic ignition systems, electronic control units, hardware and software on ...
IMF - Cogeneration CHP Engine Management System
Independed ignition up to 12 valves for cogeneration units engines. Fuel mixture management based on data from Lambda controller. Flap controll by actuator or stepper motor. Lambda probe Bosch LSU 4.9 for ...
CONTACT SUPPLIER -
Manufacturerbased in Waltham, MASSACHUSETTS (USA)
The Tecogen name has been synonymous with efficient, reliable and clean combined heat and power systems for on-site energy production for nearly four decades. Tecogen’s proven distributed generation systems provide increased resiliency, lower energy ...
Tecogen InVerde - Model e+ - Clean Natural Gas Engine-Driven Cogeneration System
The InVerde e+ module is the first and only clean natural gas engine-driven cogeneration system able to operate within the extremely low levels of regulated pollutants allowed by the distributed generation ...
CONTACT SUPPLIER -
Manufacturerbased in Herning, DENMARK
Since the outset in 1935, Danstoker has developed into a company whose name is synonymous with high-performance boilers for the international energy sector. Domiciled in Denmark – a country renowned for its far-sighted energy policy – Danstoker’s ...
-
Manufacturerbased in Mühlhausen, GERMANY
The Burkhardt company has been successfully run by a family for several generations. The village smithy in Mühlhausen, located in Upper Palatinate, Bavaria, was first mentioned in 1879 and has developed and grown continually to become a company with ...
Burkhardt - Combined Heat and Power(CHP) Plant
Working on the principle of combined heat and power, cogeneration units produce both electrical power and usable heat. This uses some 90 % of the heat available from the fuel consumed, saving significant amounts of primary energy ...
CONTACT SUPPLIER -
Manufacturerbased in Louvain-La-Neuve, BELGIUM
Leveraging more than 10 years of experience, Xylowatt has developed the NOTAR cutting-edge technology, which efficiently turns biomass or waste into a clean and cold gas fit for powering a cogeneration engine or for replacing fossil fuels in an ...
-
Manufacturerbased in Mannheim, GERMANY
With its two brands, MWM and Cat, Caterpillar Energy Solutions stands for highly-efficient and eco-friendly solutions for distributed power generation, and manufactures gas engines, electricity power plants, as well as CHP plants. Since 1871, we ...
Maintenance and Repair Services
MWM assists its customers during the entire lifecycle of the gas engines, power generators and cogeneration plants. Service Agreements; We consider the relationship with our customers as a long-term, trusting ...
CONTACT SUPPLIER -
Manufacturerbased in Germantown, WISCONSIN (USA)
Cain Industries has dedicated itself to the exclusive production of combustion exhaust heat transfer products. Our successful experience, lowering fuel costs and reducing pollution, makes us the first choice for both the retrofit and OEM client. ...
-
Manufacturerbased in Liverpool, UNITED KINGDOM
Clarke Energy is a multinational specialist in the engineering, installation and maintenance of reciprocating engine based power plants and gas engine compression stations. Our offering ranges from the supply of an engine, through to the turn-key ...
Industrial Combined Heat and Power (CHP) / Cogeneration
Gas engines based cogeneration, or combined heat and power (CHP), offers a range of potential benefits to industrial applications. Gas engine cogeneration systems can provide ...
CONTACT SUPPLIER -
Manufacturerbased in Ruse, BULGARIA
We are pioneers in the production of generators with permanent magnets, used for the produce of energy from renewable sources. Our main focus is wind and hydro energy, geo-thermal sources, and some industrial applications such as cogenerations, ...
-
Manufacturerbased in Barcelona, SPAIN
ERGOS S.A. was established in 1983 , with the main activity being engineering and manufacturing of equipment, mainly waste heat recovery steam boilers. From that time, ERGOS S.A. has pioneered cogeneration boilers. ANINGAS S.A. was established in ...
Aningas Ergos - Thermal Fluid Heater
ANINGAS Thermal fluid heaters from 10.000 kcal/h to 10.000.000 kcal/h. Maximum service temperature up to 410ºC ...
CONTACT SUPPLIER -
Manufacturerbased in Mendig, GERMANY
R Schmitt Enertec GmbH, short RSE, is one just about a dozen gas engine manufacturers worldwide. The factory with R&D, Sales, service and manufacturing is located in Mendig, Germany. What does that mean? Is RSE really producing engines? Yes. Our ...
R Schmitt Enertec - Model M Series - Gas Engines
The ENERGIN M series Gas engines form the base for a range of efficient power generation products. Depending on your projects requirement you can choose the best fit from our wide range of generator sets with and without heat ...
CONTACT SUPPLIER -
Manufacturerbased in Årsta, SWEDEN
For more than 30 years, we have delivered innovative products for gas management to municipalities and companies. We are now also investing in local production of biogas, where food producers and agriculture around the country are given the ...
-
Manufacturerbased in Bargeshagen, GERMANY
INTEC GMK is one of the leading Organic Rankine Cycle-system developers and manufacturers in Europe. INTEC GMK offers the planning, production, realization and service of complete Organic Rankine Cycle Modules for the generation of electricity from ...
-
Manufacturerbased in Andelfingen, SWITZERLAND
UT99 AG - Your filter specialist and oil mist separator manufacturer for internal combustion engines, power stations and industry. UT99 AG stands for quality in environmental technology. We have successfully concerned ourselves with the filtration ...
-
Manufacturerbased in Madrid, SPAIN
AITESA, with over 30 years of experience, high efficiency products, top innovations within the Engineering sector and an excellent customer service, is the best warranty to develop satisfactory solutions for your company including projects and ...
AITESA - Waste Heat Recovery Boilers / Heat Recovery Steam Generators and HTF Recovery Boilers
Allow steam generation (saturated or superheated) and superheated water from flue of furnaces, gas turbines, waste liquid incinerators (HCL, H2SO4) or waste gas incinerators (Off-gas, biogas, SH2…), fuel-oil engines (2 stroke ...
CONTACT SUPPLIER -
Manufacturerbased in Havlíckuv Brod, CZECH REPUBLIC
Since 2011, the company B:POWER, a.s. has started cooperating closely with leading world producers of technologies for the production of electric energy - the ORC systems. It has expanded gradually from the Czech Republic further to Slovakia, ...
Durr Cyplan - Organic Rankine Cycle (ORC) Systems
The German technology from the company DURR has the biggest offer of products at all. It is possible to use small ORC units DURR CYPLAN from 40kW of electric output up to large 500kW generators. They are divided into two types – direct ...
CONTACT SUPPLIER -
Manufacturerbased in Frazione Campagnola di Zevio, ITALY
Specialists in the design and production of complete high-tech thermal systems. Our long experience has allowed us to create highly qualified services that can meet any need related to the management, monitoring and maintenance of energy systems ...
ICI-Caldaie - Model WH - Waste Heat Recovery Boilers
The waste-heat boilers of the WH range recover energy from hot flue gases as heat source without any supplementary combustion. These boilers are of the monobloc type, with fully automatic operation and are provided with all accessories required for ...
CONTACT SUPPLIER -
Manufacturerbased in Desio (MB), ITALY
Tempco designs and develops solutions for thermal energy management in any kind of industrial sector and application field, helping the customer choosing the most suitable thermal machine fitting the needs of any kind of productive process, offering ...
T Start Engine
Skid package units for fuel preheating in engines and cogenerating plants. Possible execution with electric heaters Working temperature ...
CONTACT SUPPLIER -
Manufacturerbased in Celle, GERMANY
Our main activities include the development, construction and distribution of innovative heating and electricity-generation devices (heat pumps, combined heat and power, cogeneration, etc). These products are designed to have an extremely low energy ...
Model EN-Power - Modern Combined Heat ad Power (CHP) System
Gas or diesel engine-driven cogeneration system with a built-in hot water tank, for heating & decentral power generation at your home or small ...
CONTACT SUPPLIER -
Manufacturerbased in Newton Abbot, UNITED KINGDOM
Centrax Limited is a privately owned company based in Newton Abbot, Devon in the South West of England. The company was founded in 1946 by Richard H H Barr OBE and the late Geoffrey R White after both worked with Sir Frank Whittle in the Power Jets ...
Model CX501-KB5 (3.9 MW) - Gas Turbine-Powered Electrical Generator Sets
The 501-KB5 aeroderivative gas turbine engine shares commonality with the other single-shaft 501-K engines. Its low mass flow and high exhaust temperature makes the KB5 the ideal engine for ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you