Combustor Manufacturers
-
J.U.M. Engineering is an independent privately owned developer and manufacturer of FID based hydrocarbon analyzers since 1973. A complete line of Heated Total Hydrocarbon Analyzers using the Flame Ionization Detector (FID) technology in an array of ...
-
One of the largest suppliers of incinerators globally. Providing award-winning waste solutions across the Medical, Animal and Municipal sectors. Our standard incinerators range from 10kg/hr - 1,000kg/hr capacity. We also offer a bespoke design ...
Bespoke Incinerator Design
INCINER8 have many years experience in the design and supply of waste incinerators. Due to the broad nature of end users we have seen almost all sizes and scales of operation and types of waste that need incinerating. Whether you need the ...
CONTACT SUPPLIER -
ENVEA manufactures high-precision monitoring systems as well as environmental data processing and reporting solutions with extensive knowledge in the development of complete turnkey solutions. We assist entities in complying with applicable ...
-
Solar Turbines Incorporated, headquartered in San Diego, California, is a wholly owned subsidiary of Caterpillar Inc. Solar manufactures the world’s most widely used family of mid-sized industrial gas turbines, ranging from 1 to 39 megawatts. More ...
Gas Turbines
A gas turbine engine is a type of internal combustion engine. Essentially, the engine can be viewed as an energy conversion device that converts energy stored in the fuel to useful mechanical energy in the form of rotational power. The term ...
CONTACT SUPPLIER -
Anguil Environmental Systems, Inc. is an environmental technology supplier headquartered in Milwaukee, WI USA with an extensive global presence, including offices in Asia and Europe. Anguil has been a trusted air and water solutions supplier for ...
Anguil - Model VCU - Vapor Combustor Unit - Enclosed Flare
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology ...
CONTACT SUPPLIER -
C&G has been working since 1971 in the sector of industrial wastewater treatment. The Know-How acquired thanks to the design and construction of over 2000 plants sold in Italy and abroad continues to encourage growth and innovation, in order to ...
-
Continental Controls Corporation (CCC) engineering offers a unique blend of talent in mechanical design, electronic and software design, along with application knowledge for reciprocating gas engines and gas turbines. Using these skills, CCC ...
CCC - Model AGV50 - Gas Turbine DLE Pilot Fuel Valve
The Continental Controls Corporation AGV pilot valve is a critical component of gas turbine engine control systems. It is a compact, lightweight, and easy-to-install device that helps to improve engine performance and reliability. The AGV pilot ...
CONTACT SUPPLIER -
Manufacturerbased in Sundre, ALBERTA (CANADA)
Clear Rush Co. is a privately owned Clean Technology Group of Companies providing proven and reliable clean tech products and services to the Global Energy ...
Model BGR LP 500, 1000, 1500 - Cube Combustor
The BGR Cube is a highly versatile, low cost vapour combustor designed to destruct volatile organic compounds (VOCs) and BTEXs produced from casing gas, pneumatic devices, or storage tanks. The BGR Cube eliminates the need to ...
CONTACT SUPPLIER -
Manufacturerbased in Chattanooga, TENNESSEE (USA)
Our core staff has a combined experience of 40 years in combustion technology, manufacturing and industrial design. We have an open mind towards our customers’ specific needs and wants, and that makes us one of the most reliable businesses to work ...
Thruster - Model V1-20 - Combustors
It's flexibility and long list of features and capabilities provide versatile functionality for a range of ...
CONTACT SUPPLIER -
Manufacturerbased in Hengelo, NETHERLANDS
OPRA Turbines develops, manufactures and services state of-the-art gas turbine systems, and is headquartered in Hengelo, The Netherlands. Our advanced turbine technology has turned the OP16 Gas Turbine into a masterpiece of technology allowing us to ...
OPRA - Model OP16-3C - Gas Turbine Generator
The OP16 Gas Turbine has an all-radial design which provides robustness, reliability, high efficiency, and low emissions. OPRA Turbines advanced combustion systems offer multi-fuel capability giving the OP16 the ability to handle a wide range of ...
CONTACT SUPPLIER -
Manufacturerbased in Chattanooga, TENNESSEE (USA)
ASHCOR is dedicated to manufacturing flares and combustors to meet the unique needs of each customer. Our team of sales representatives, engineers and fabricators work together with each customer to determine the most effective solution for each ...
ASHCOR - Model 100 - Standard Enclosed Combustor
ASHCOR Standard Combustors are made of a stainless steel body and designed to withstand heavy wind, harsh oil and gas environments and other stringent conditions. Built to promote environment and site safety, ASHCOR Standard ...
CONTACT SUPPLIER -
Manufacturerbased in Renningen, GERMANY
e-flox GmbH is a manufacturer of facilities and FLOX burners in the field of thermal process energy. Our aims are solutions for lowcaloric value (LCV) gases resulting from biogas upgrading plants, landfill sites, and industrial and chemical ...
e-flox - Model LCV - Compact Combustor
The compact design LCV combustor was originally designed to serve PSA digester gas upgrading systems for municipal biogas or sewags sludge fermenters. It is able to burn up to 100 Nm³/h (NCMH) of LCV gas. For methane ...
CONTACT SUPPLIER -
Manufacturerbased in South Florida, FLORIDA (USA)
We design and build new waste recovery facilities, and help transform existing ones. OUR TECHNOLOGIES are sourced from around the world based on viability, reduced carbon footprint, system flexibility, and simplicity while never losing sight of ...
GEN-H / Waste-To-Heat Combustor - Model GEN-H - Waste-To-Heat Combustor
A containerized, ultra-high temperature, self-fueling proprietary technology to convert post-recycling waste into renewable energy. The Gen-H represents a departure from waste recovery technologies since it is (1) small-scale and mobile, (2) treats ...
CONTACT SUPPLIER -
Manufacturerbased in Houston, TEXAS (USA)
Over the past 30 years, Kawasaki Gas Turbines has grown to be a primary player in the power generation market, but our history goes back even further. In 1943, we built the first aircraft gas turbine engine, then went on to become a major service ...
Kawasaki Gas Turbine - Model GPB60/60D - Heavy Duty Single Combustor Gas Turbine
Ideal for reliable on-site base load power generation requiring from 4.5 MW to 5.2 MW for co-generation applications.The GPB60/60D is based on Kawasaki's proven M7A heavy duty industrial gas turbine with over 15 years of commercial experience and ...
CONTACT SUPPLIER -
Manufacturerbased in Kellyville, OKLAHOMA (USA)
HERO Flare designs, manufactures and services flare systems ranging from our standard 'in stock' flares available for immediate shipment to custom engineered flare systems to meet your specific application. The HERO team is dedicated to providing ...
HeroFlare - Enclosed Vapor Combustors
The Hero Flare Enclosed Vapor Combustors are an effective, efficient and economical alternative to achieving compliance with Guad-0 EPA regulations. As an industry flare/combustor leader Hero offers more Guad-0 EPA ...
CONTACT SUPPLIER -
Manufacturerbased in Weatherford, TEXAS (USA)
Vaprox LLC. is your source for vapor control solutions. Headquartered outside of Weatherford, Texas, just west of the Dallas/Fort Worth area. Vaprox caters specifically to the oil and gas industry and understands the dynamics of both the technical ...
Tank Vapor Combustor
Vaprox is committed to top quality, safety, and cost in all of our products. Every product we offer is made and assembled in the United States of America. This means that you are getting a top quality product that just isn’t available from the ...
CONTACT SUPPLIER -
Manufacturerbased in Pasadena, TEXAS (USA)
Hilliard Emission Controls, Inc , dba PURGIT has emission control devices for chemicals. We have a mobile condenser capable of degassing large tanks and making zero emissions. The condenser recovers the VOC as liquid condensate for recycling. We ...
PURGIT - Enclosed Combustors
PURGIT operates a turn-key mobile combustor service for sites all over the United States. Both enclosed combustors and open flares are kept in stock and ready to deploy for applications ranging from above-ground ...
CONTACT SUPPLIER -
Manufacturerbased in North Haven, CONNECTICUT (USA)
Precision Combustion, Inc. (PCI) is a clean energy technology company developing and manufacturing innovative catalytic, electrochemical and sorbent devices and systems for energy sector applications. Precision Combustion, Inc. (PCI) is an energy ...
PCI - Model OXY - Fuel Combustor
led to the development of oxy-fuel combustion in both pulverized coal plants and turbine power cycles for its promise of elimination of nitric oxide (NOx) emissions at the high combustor temperatures required for efficiency. This ...
CONTACT SUPPLIER -
Manufacturerbased in Austin, TEXAS (USA)
AEREON, Headquartered in Austin, Texas, AEREON is a global leader in gas and vapor handling, combustion and recovery technologies and services. AEREON was formed in 2012 when Flare Industries, LLC acquired Jordan Technologies. Under the two brands, ...
AEREON - Model Ghost Series - Enclosed Combustors
With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control ...
CONTACT SUPPLIER -
Manufacturerbased in Boden, SWEDEN
SWEBO Bioenergy AB develops, produces and markets environmentally friendly and carbon neutral Bioenergy systems for larger residential houses, industry facilities, and local shared heating plants. The company specializes in the production and ...
Swebo - Biotherm Combustor
The SWEBO BioTherm is the result of a research and development project lasting many years and, like so many of our other products, it has made a significant impression on the market. Among other fuels, the burner can burn challenging fuels such as ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you