Combustor Manufacturers, Suppliers & Companies In USA
-
Solar Turbines started as an aircraft company in 1927. The company grew through several wars and the Great Depression. Solar’s growth led the company to develop a wide range of innovative products. Solar Turbines is one of the world's leading ...
Gas Turbines
A gas turbine engine is a type of internal combustion engine. Essentially, the engine can be viewed as an energy conversion device that converts energy stored in the fuel to useful mechanical energy in the form of rotational power. The term ...
CONTACT SUPPLIER -
Anguil Environmental Systems, Inc. is an environmental technology supplier headquartered in Milwaukee, WI USA with an extensive global presence, including offices in Asia and Europe. Anguil has been a trusted air and water solutions supplier for ...
Anguil - Model VCU - Vapor Combustor Unit - Enclosed Flare
Anguil’s Vapor Combustion Unit combines the simplicity of an enclosed flare with the destruction performance of a thermal oxidizer. Whether designed for intermittent use or installed on a continuous emission stream; the Anguil VCU technology ...
CONTACT SUPPLIER -
Continental Controls Corporation (CCC) engineering offers a unique blend of talent in mechanical design, electronic and software design, along with application knowledge for reciprocating gas engines and gas turbines. Using these skills, CCC ...
CCC - Model AGV50 - Gas Turbine DLE Pilot Fuel Valve
The Continental Controls Corporation AGV pilot valve is a critical component of gas turbine engine control systems. It is a compact, lightweight, and easy-to-install device that helps to improve engine performance and reliability. The AGV pilot ...
CONTACT SUPPLIER -
PremiumManufacturerDistributor in Los Angeles, CALIFORNIA (USA)
C&G has been working since 1971 in the sector of industrial wastewater treatment. The Know-How acquired thanks to the design and construction of over 2000 plants sold in Italy and abroad continues to encourage growth and innovation, in order to ...
-
J.U.M. Engineering is an independent privately owned developer and manufacturer of FID based hydrocarbon analyzers since 1973. A complete line of Heated Total Hydrocarbon Analyzers using the Flame Ionization Detector (FID) technology in an array of ...
-
ENVEA manufactures high-precision monitoring systems as well as environmental data processing and reporting solutions with extensive knowledge in the development of complete turnkey solutions. We assist entities in complying with applicable ...
-
Manufacturerbased in Chattanooga, TENNESSEE (USA)
Our core staff has a combined experience of 40 years in combustion technology, manufacturing and industrial design. We have an open mind towards our customers’ specific needs and wants, and that makes us one of the most reliable businesses to work ...
Thruster - Model V1-20 - Combustors
It's flexibility and long list of features and capabilities provide versatile functionality for a range of ...
CONTACT SUPPLIER -
Manufacturerbased in Chattanooga, TENNESSEE (USA)
ASHCOR is dedicated to manufacturing flares and combustors to meet the unique needs of each customer. Our team of sales representatives, engineers and fabricators work together with each customer to determine the most effective solution for each ...
ASHCOR - Model 100 - Standard Enclosed Combustor
ASHCOR Standard Combustors are made of a stainless steel body and designed to withstand heavy wind, harsh oil and gas environments and other stringent conditions. Built to promote environment and site safety, ASHCOR Standard ...
CONTACT SUPPLIER -
ManufacturerOffice in Austin, TEXAS (USA)
OPRA Turbines develops, manufactures and services state of-the-art gas turbine systems, and is headquartered in Hengelo, The Netherlands. Our advanced turbine technology has turned the OP16 Gas Turbine into a masterpiece of technology allowing us to ...
OPRA - Model OP16-3C - Gas Turbine Generator
The OP16 Gas Turbine has an all-radial design which provides robustness, reliability, high efficiency, and low emissions. OPRA Turbines advanced combustion systems offer multi-fuel capability giving the OP16 the ability to handle a wide range of ...
CONTACT SUPPLIER -
Manufacturerbased in Kellyville, OKLAHOMA (USA)
HERO Flare designs, manufactures and services flare systems ranging from our standard 'in stock' flares available for immediate shipment to custom engineered flare systems to meet your specific application. The HERO team is dedicated to providing ...
HeroFlare - Enclosed Vapor Combustors
The Hero Flare Enclosed Vapor Combustors are an effective, efficient and economical alternative to achieving compliance with Guad-0 EPA regulations. As an industry flare/combustor leader Hero offers more Guad-0 EPA ...
CONTACT SUPPLIER -
Manufacturerbased in South Florida, FLORIDA (USA)
We design and build new waste recovery facilities, and help transform existing ones. OUR TECHNOLOGIES are sourced from around the world based on viability, reduced carbon footprint, system flexibility, and simplicity while never losing sight of ...
GEN-H / Waste-To-Heat Combustor - Model GEN-H - Waste-To-Heat Combustor
A containerized, ultra-high temperature, self-fueling proprietary technology to convert post-recycling waste into renewable energy. The Gen-H represents a departure from waste recovery technologies since it is (1) small-scale and mobile, (2) treats ...
CONTACT SUPPLIER -
Manufacturerbased in Houston, TEXAS (USA)
Over the past 30 years, Kawasaki Gas Turbines has grown to be a primary player in the power generation market, but our history goes back even further. In 1943, we built the first aircraft gas turbine engine, then went on to become a major service ...
Kawasaki Gas Turbine - Model GPB60/60D - Heavy Duty Single Combustor Gas Turbine
Ideal for reliable on-site base load power generation requiring from 4.5 MW to 5.2 MW for co-generation applications.The GPB60/60D is based on Kawasaki's proven M7A heavy duty industrial gas turbine with over 15 years of commercial experience and ...
CONTACT SUPPLIER -
Manufacturerbased in North Haven, CONNECTICUT (USA)
Precision Combustion, Inc. (PCI) is a clean energy technology company developing and manufacturing innovative catalytic, electrochemical and sorbent devices and systems for energy sector applications. Precision Combustion, Inc. (PCI) is an energy ...
PCI - Model OXY - Fuel Combustor
led to the development of oxy-fuel combustion in both pulverized coal plants and turbine power cycles for its promise of elimination of nitric oxide (NOx) emissions at the high combustor temperatures required for efficiency. This ...
CONTACT SUPPLIER -
Manufacturerbased in Weatherford, TEXAS (USA)
Vaprox LLC. is your source for vapor control solutions. Headquartered outside of Weatherford, Texas, just west of the Dallas/Fort Worth area. Vaprox caters specifically to the oil and gas industry and understands the dynamics of both the technical ...
Tank Vapor Combustor
Vaprox is committed to top quality, safety, and cost in all of our products. Every product we offer is made and assembled in the United States of America. This means that you are getting a top quality product that just isn’t available from the ...
CONTACT SUPPLIER -
Manufacturerbased in Pasadena, TEXAS (USA)
Hilliard Emission Controls, Inc , dba PURGIT has emission control devices for chemicals. We have a mobile condenser capable of degassing large tanks and making zero emissions. The condenser recovers the VOC as liquid condensate for recycling. We ...
PURGIT - Enclosed Combustors
PURGIT operates a turn-key mobile combustor service for sites all over the United States. Both enclosed combustors and open flares are kept in stock and ready to deploy for applications ranging from above-ground ...
CONTACT SUPPLIER -
ManufacturerDistributor in Palm Beach Gardens, FLORIDA (USA)
AEREON, Headquartered in Austin, Texas, AEREON is a global leader in gas and vapor handling, combustion and recovery technologies and services. AEREON was formed in 2012 when Flare Industries, LLC acquired Jordan Technologies. Under the two brands, ...
AEREON - Model Ghost Series - Enclosed Combustors
With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control ...
CONTACT SUPPLIER -
Manufacturerbased in Glenpool, OKLAHOMA (USA)
Founded in Tulsa, Oklahoma in 1992, MRW's flare, oxidizer, and burner designs are based on over 30 years combustion and pollution control equipment experience by each of our principals. MRW is a specialist in custom solutions and consultative ...
MRW - Enclosed Combustors System
With hundreds of units in operation across Texas, Oklahoma, Colorado, Utah, New Mexico, Louisiana, Ohio, Pennsylvania, West Virginia, and North Dakota MRW enclosed combustors, often called vapor combustors, are ...
CONTACT SUPPLIER -
Manufacturerbased in Rancho Cordova, CALIFORNIA (USA)
Clean Energy Systems has developed game-changing technology that is revolutionizing the power industry by eliminating the traditional Exhaust stack and making zero-emission power a Reality . Based on proven rocket technology, CES oxy-fuel combustion ...
CES - Reheat Combustors
The Clean Energy Systems reheat combustor, or reheater, dramatically improves the efficiency of combined steam and gas turbine power cycles by boosting the drive gas to turbine inlet temperatures typically associated with gas ...
CONTACT SUPPLIER -
Manufacturerbased in Moore, OKLAHOMA (USA)
ACL Combustion Inc. is a privately-owned US based company who has been leading the way in safe and reliable industrial burner systems for the Oil and Gas Industry. Through years of experience, ACL has been an innovator in providing safe and reliable ...
ACL - Combustors
ACL combustors are a patented high volume combustion device with up to 1,800,000 scf/d (high pressure) or 100,000 scf/d (low pressure) flow rate capacity for destroying fugitive emissions: tank, casing, or vent gas vapors. Higher ...
CONTACT SUPPLIER -
Manufacturerbased in St. Helens, OREGON (USA)
Unlike most of the newer companies on the pellet fuel energy scene for commercial and light industrial applications SolaGen has its roots in heavy industrial wood fuels applications, wood fuel preparation and pellet manufacturing facility design. ...
ReciproTherm - Model 10-200 MM BTU/Hr - Biomass Energy Systems
This proven reciprocating grate combustor is ideal for use with difficult to burn biomass fuels. Fully capable of using fuels with moisture contents as high as 55% this combustor features high chrome grate bars, ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you