Flare Ignition Manufacturers, Suppliers & Companies
-
Ennox biogas technology is one of the leading companies in the area of biogas treatment, gas storage technology and gas flaring technology. Our modern gas components cover the entire bandwidth of biogas equipment - starting with digester equipment, ...
Ennox - Model ECO - Manual Gas Flare
mbar is always recommended. The eco gas flare ignites at the press of a button plus simultaneous actuation of the manual flap. To end the ring cycle, the manual flap is closed again. Eco 100 – 400 is supplied ...
CONTACT SUPPLIER -
Manufacturerbased in Zoetermeer, NETHERLANDS
Since 1947 Smitsvonk has been making low-tension high-energy ignition and control systems for industrial combustion processes. These electrical and electronic ignition systems are applied world-wide. They are characterized by a high degree of ...
Smitsvonk - Flare Ignition Systems
Ignition of all kind of flares in the (petro) chemical, oil and gas, steel and biogas ...
CONTACT SUPPLIER -
Manufacturerbased in Plano, TEXAS (USA)
Stackmatch Flare Ignition, Inc. established in 1979, designs and manufactures Flare Pilots, Pilot Ignition Systems, Flame Detection and Controls for the Petrochemical and Oil & Gas industries. We continuously challenge basic concepts of conventional ...
Stackmatch - Hot Rod Flare Pilot
A unique self-aspirated flare pilot dedicated for flares with Stackmatch Flare Ignition, Inc. patented “Micro Flame Front Ignition“ and “Plasma ...
CONTACT SUPPLIER -
Manufacturerbased in Dist. Mehsana, INDIA
Airoil Flaregas Pvt. Ltd. was established in 1984, as a joint venture company with Airoil Flaregas Ltd. of the UK. The British Company was acquired by Hamworthy Combustion Engineering Ltd., UK in 1993. Hamworthy Combustion was acquired by Koch ...
AFG - Flare Pilots (Flare Ignition Systems)
AFG Combustion’s flare pilots are suitable for use on all types of Elevated Flare Tips, Ground flares and Burn Pits, in the worst weather conditions which may exist off-shore or on-shore, from ...
CONTACT SUPPLIER -
Distributorbased in Burnham, UNITED KINGDOM
GBA Flare Systems is an internationally based supplier of flare equipment to the world's Oil and Gas, and Petrochemical Industies. The flare systems we supply include flare tips, flare pilot ignition systems, elevated flare structures and associated ...
Pilots And Ignition Systems
GBA offer a full range of ignition equipment to suit all requirements. We offer the well tried and tested Flame Front Generator (FFG) in both forced draft (uses compressed air) and natural draft (inspirates it's own air) versions ...
CONTACT SUPPLIER -
Manufacturerbased in Moore, OKLAHOMA (USA)
ACL Combustion Inc. is a privately-owned US based company who has been leading the way in safe and reliable industrial burner systems for the Oil and Gas Industry. Through years of experience, ACL has been an innovator in providing safe and reliable ...
-
Manufacturerbased in Ponoka, ALBERTA (CANADA)
Alberta Flares Energy Service Ltd. was established in 1995 by Peter and Charlene Oakes. The 15,500 sq. ft. shop is located in the industrial park of Ponoka, Alberta, Canada with a staff ranging from 12 to 16. Alberta Flares recently custom designed ...
-
Manufacturerbased in Austin, TEXAS (USA)
From a simple beginning to a multi-national leader supplying critical combustion, vapor recovery and emissions control technology to protect the environment, the Encore Combustion team previously founded, owned, and operated one of the top companies ...
Encore Combustion - Model 930 - EverLite FFG Ignited Flare Pilot
Robust flare pilot designed to meet the requirements of API-537. Ignition by ground-based flame front generator (FFG). Pilot ignition monitoring via thermocouples or flame ionization. Stainless ...
CONTACT SUPPLIER -
Manufacturerbased in Xi’an, CHINA
Shaanxi Aipu Solids Control Co., Ltd is a professional manufacturer on drilling mud equipment. Based on national and international standard we provide clients' latest and optimal solutions. Our main products including shale shaker, mud cleaner, ...
Aipu Solids control - Model AFI - Aipu Flare igniter
AFI series ignition device is an environment-friendly electric device for igniting gas discharged from Mud gas separator. 1. Easy to operate and maintain 2. Competitive price give you high cost-efficient ...
CONTACT SUPPLIER -
Manufacturerbased in Kellyville, OKLAHOMA (USA)
HERO Flare designs, manufactures and services flare systems ranging from our standard 'in stock' flares available for immediate shipment to custom engineered flare systems to meet your specific application. The HERO team is dedicated to providing ...
HeroFlare - Flare Pilots & Retractable Systems
The flare ignition system is one of the most critical components on any flare system to ensure the flare gas is ignited under any conditions. HERO offers the best ...
CONTACT SUPPLIER -
Manufacturerbased in Austin, TEXAS (USA)
AEREON, Headquartered in Austin, Texas, AEREON is a global leader in gas and vapor handling, combustion and recovery technologies and services. AEREON was formed in 2012 when Flare Industries, LLC acquired Jordan Technologies. Under the two brands, ...
AEREON - Knockout Drums
. These droplets must be removed in order to avoid the phenomenon known as flaming rain, which occurs when liquid droplets are blown out the top of a flare stack along with ignited process gases. These vessels can ...
CONTACT SUPPLIER -
Manufacturerbased in Mantova, ITALY
TCD Italia works across the entire oil and gas supply chain to provide complete combustion and recovery solutions that enable its customers to meet stringent air quality and safety regulations. TCD Italia is managed by professionals with many years ...
Retrofit Flare Tip Services
TCD Italia offers replacement flare tips of any size. If you have an old flare package that is in need of a new ignition system and/or flare tip, we will be able to find the ...
CONTACT SUPPLIER -
Manufacturerbased in MD of Rocky View, ALBERTA (CANADA)
TORNADO Combustion Technologies is a recognized leader in the design and manufacturing of combustion systems for energy producers and engineering firms worldwide. Tornado works closely with our customers to innovate new products that provide simple ...
Tornado - Purge Gas & Reduction Systems
Purge gas (or "purge flow") is required to prevent air impingement in the process header where there is little or no process flow going to the flare (as in the case of a dedicated intermittent or ESD flare). If air ...
CONTACT SUPPLIER -
Manufacturerbased in Glenpool, OKLAHOMA (USA)
Founded in Tulsa, Oklahoma in 1992, MRW's flare, oxidizer, and burner designs are based on over 30 years combustion and pollution control equipment experience by each of our principals. MRW is a specialist in custom solutions and consultative ...
Upgrades/Retrofits Services
MRW specializes in upgrades, retrofits, and refurbishments due to our vast experience and familiarity with a variety of technologies, designs, and manufacturers. MRW has replaced and refurbished flare tips, retrofitted ...
CONTACT SUPPLIER -
Manufacturerbased in Kiel, GERMANY
c-deg provides customized solutions for ecologically friendly treatment of all greenhouse gases, worldwide. Gases released from industrial and biological processes that cannot be used for other purposes, require flaring according to the state of the ...
-
Manufacturerbased in Korneuburg, AUSTRIA
The company Gastechnik Himmel GmbH will make available existing resources under the best possible use of the latest technologies and will make a significant contribution to accelerate the energy transition. We are specialized in the design and ...
GT-Himmel - Model HTF Series - HighTemperature Flare
The series HTF is designed as a works flare (according to TA-Luft) with automatic exhaust temperature control at 1000°C and a dwell of at least 0.3 seconds. ...
CONTACT SUPPLIER -
Manufacturerbased in Philadelphia, PENNSYLVANIA (USA)
NAO provides design, manufacturing, and testing operations with our Pennsylvania / Texas facilities and worldwide engineering/service along with specially trained local sales representatives. NAO is a leader in combustion, environmental and safety ...
NAO - Portable Ignitors for Burners
NAO also has permanent mounted backup ignitors for burners & ...
CONTACT SUPPLIER -
Manufacturerbased in Wijnegem, BELGIUM
Companies looking for highly effective biogas processing and use technologies will find a perfect partner in DWS. As the world focuses on improving the air quality and decarbonization of the energy sources, DWS offers its knowledge and services to ...
Elevated Flare
sparking. In addition to our standard self-supporting free standing flare stack, flame arrester, instrumentation, and control panel, every elevated flare is equipped with DWS’s: high retention ...
CONTACT SUPPLIER -
Manufacturerbased in Brownsville, TEXAS (USA)
FAV Systems Corp. is a young company formed by people who have been in the oil and gas industry for over 30 years, making us true connoisseurs of the needs of our customers, especially in extreme climates like Canada. Our products are manufactured ...
FAV Systems - Silicon Nitride Gas Pilot Nozzle
FAV Systems has incorporated this cutting edge technology into newly engineered Silicon Nitride pilot nozzles for flare ignition pilots. This new breakthrough will ensure long lasting and more dependable ...
CONTACT SUPPLIER -
Original equipment manufacturer (OEM)based in Forestburg, ALBERTA (CANADA)
Prism is an oilfield equipment manufacturing company that manufactures and services a wide variety of products used in all steps of the production process. Prism is a company that prides itself on being a step ahead and being located in Canada has ...
Premier Pilots
The true fail-safe design of the Prism Premier Pilot is dependable and consistent under the harshest of environments, the Auto Relight is used to relight the pilot in the rare case where flame failure may ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you