10 products found
KREISEL GmbH & Co. KG Products
-
Other Products
-
KREISEL - Slide Gate
Slide gates are used as locking, metering and safety components below dosing and in process engineering systems of the bulk material technology. Our slide gate series(engineered at Kreisel) is made for extreme and complicated operating conditions. The specific design of the KREISEL slide gates is based on the system-specific operating conditions and bulk material properties. KREISEL slide gates are designed as knifegate valves with rectangular or rounded ...
-
KREISEL - Double Flap Gate
Double flap gates are used to seal vacuum chambers with simultaneous discharging of dust-based and flowing material. KREISEL double flap gates are particularly suitable for discharging of highly abrasive bulk materials at the basic industry as well as the chemical industry: minerals, nature stone, ash, cement, ceramics and coal. The operating principle of the flap gate valve is that two flap gates in a fixed housing open and close alternately. The ...
-
KREISEL - Dome Valve
The KREISEL DOME VALVE® is an shut-off valve. It is used at high differential pressures up to 16bar. The benefits arise from the cross-sectionbeing available to 100% in the opening condition. It is useable at the pneumatic conveying asa conveying line diverter. In this case there will fitted a Y-pipe with two KREISEL DOME VALVES®. Even so they have been seals against high differential pressures. The field of main application is the pressure vessel ...
-
KREISEL - Conveying Line Diverter
If using a pneumatic conveying system either two or more receiving points, such as silos orreactors are feeded, the Conveying line divertercan be used. In addition to the compact design, the crossover is characterized by its low pressure drop. The diverter is designed so that the mainflow direction of the inlet and the outlet is in the same axis. The seal is realized by a valve disk. The structural design ensures that caking cannot lead to blocking of the ...
-
KREISEL - Two Way Distributor
KREISEL two-way distributors are used as control components below (located under) containers, as well as in process engineering systems of the bulk material technology. The design of the KREISEL two-way distributors is based on the system-specific operating conditions and bulk material properties. Depending on the practical requirements of the bulk material flow direction, the distributor can be operated by means of actuating drive, pneumatic or hydraulic ...
-
Tubular Screw Feeder
Tubular screw feeders and trough screw feeders are used for high flow rates and also to bridge differences in height. They can be employed in just about any kind of production plant. Screw heat exchangers not only convey the product but also heat/cool it in the process. Screw activators are used to discharge large amounts of bulk material with difficult or poor flow properties. Because several screw spirals are installed next to each other in a housing, ...
-
Rotary Valves
-
Rotary Valves
The rotating rotor takes up bulk material under the inlet opening and filling his cells. By the rotational movement the bulk material have been conveyed to the outlet. Due to the gravitational force the material fall out at the followed plant area. Thus arised a continuous volumetrically conveying. The output is depend from the volume of the cells and the rotation speed of the ...
-
Self-Cleaning Rotary Valves
Selfcleaning-rotary-valves are used to discharge of bulk materials who are bad fluent, humid, pasty and sticky - with constant volume flowrate or to volumetrically dosing out of containers in the following plant. Different design sizes for flow rates up to 750 t/h, are proved in many process plants of different industries. KREISEL selfcleaning rotary valves, manufactured explosion pressure resistant, are certificated for an explosion surge up to 10 bar. ...
-
Ceramic Rotary Valves
KREISEL Ceramic Rotary Feeders are the latest state of the art rotary feeders. Their highly wearresistant lining with ceramic elements reduces the wear to conventional rotary feeders by amultiple. Depending on requirement profile different wear protection systems (Wear ProtectA-F) are available. Ceramic places with a Mohshardness of 8.5 - 9.0 (for comparison: Diamond has the highest known hardness of a naturally occurring mineral with Mohs 10) the optimum ...
-
Pneumatic Conveyance
-
KREISEL - Pneumatic Conveyance
KREISEL pneumatic conveying systems are best adepted for conveying every kinds of bulk materials. Conveyor distances over 1,000 meter and conveying rates more than 100 t/h can be realized. Every conveying system will be customised for the special kinds of customer requirements and with an optimum energetic efficiency level. As loading or feed-in componentsare usable: rotary valve, pressure vessel, jet conveyor or screwconveyor comes from the KREISEL ...