11 products found
Onslow Engineering Pty Ltd. Products
-
Dispersers
These units are used for the manufacture of paint millbase on a large scale. Sizes range from 2,500 litre - 12,000 litre working capacity. They are extremely efficient because of the configuration of slow speed sweep anchor agitator and twin elevating head dispersers.
-
Model Lab Type 1.5 kW - High Speed Cavitation Disperser
High Speed Cavitation disperser available in either mechanical variable pulley drive to the mixer shaft or inverter variable speed drive. Drive mounted on bridgepiece attached to the machine column and base assembly. Shaft speed infinitely variable between approximately 760 and 7700 rpm. Mixer shaft fitted with 50,75mm or 100mm diameter stainless steel rotor with rotor boss and nut. Variable speed unit complete with speed indicator. Drive pulleys and belt ...
-
Model 7.5 kW - High Speed Cavitation Disperser
Heavy duty construction. Available in both Mechanical and Inverter Variable speed drives motor increased safety for hazardous locations to Class 1 Zone 1 requirements. Typical working Speed range 410-3280 rpm with speed indication. High performance stainless steel 200 or 250mm diameter cavitation rotor with rotor bosses & nut. Disperser head with twin columns supported in cast iron bearings. Counter balanced head with finger-tip manual elevation and ...
-
Model 22 kW - High Speed Cavitation Disperser
Heavy duty construction. Available in both Mechanical and Inverter Variable speed drives motor increased safety for hazardous locations to Class 1 Zone 1 requirements. Typical working Speed range 500-2000 rpm with speed indication. High performance stainless steel 300 or 350mm diameter cavitation rotor with rotor bosses & nut. Disperser head with machined column supported in heavy duty bearings. Elevated by self-contained hydraulic power pack with ...
-
Batch Beadmills
A unique but simple machine which is normally fixed speed and fixed batch size. A range of batch bead mills is available from laboratory size to 450 litre mill base capacity. The mill contains a charge of glass beads which, when agitated with the product, will achieve a fine dispersion on most pigments within 15-30 minutes. The product is then discharged via a specially designed valve incorporating a separator screen to retain glass ...
-
Roto-Scrubber
The Roto-Scrubber is a simple but very effective machine used for the cleaning of mixing tubs from approximately 50 litre drums up to 1700 mm diameter and 1700mm overall height. The pneumatically operated brush head adjusts automatically to the tub size being cleaned. Because of the units effectiveness, a very minimal quantity of solvent is required to clean tubs. Interchangeable brush heads would be required for large ranges of pot ...
-
Hydraulic Emptying Press
Scope: A floor-mounted hydraulic emptying press with optional dosing head and complete with hydraulic powerpack and necessary controls suitable for use in conjunction with special mixing ...
-
Industrial Waste Containers
-
Onslow - Model Portopac - Portable Compactor / container
Portable Compactor / container . 8.5 cubic metre to 25 cubic metre . Suitable for liquids, sludge etc.Option of 240 or 660 cart lifter . Complete with safety guarding and safety ...
-
Stationary Compactor / Container
Container only removed for emptying . 8.5 cubic metre to 25 cubic metre. Suitable for non liquid products. Option of 240 or 660 cart lifters. Complete with safety guarding and safety ...
-
Onslow - Sort-On-The-Move System
Onslow SORT-ON-THE-MOVE systems have been developed especially for the recycling sector. The recycle body matches the recommendations of Southern Sydney Waste Planning and Managment Board's report entitled "Best Practice Focus on Waste Collection". WorkCover inspected and granted an approval for the workstation adaptation. Operators empty the separating compartments by means of pneumatically controlled chute doors. Sorting of the material is efficient ...
-
Dry and Wet Grinding
-
Onslow - Union Process for Dry and Wet Grinding
Union Process manufactures a broad line of wet and dry grinding Attritors and small media mills. They also offer a wide assortment of grinding media and provide toll milling and refurbishing services. Union Process is also the leading manufacturer of Rubber Inks for balloons, swim caps and other rubber ...
-
Paint Filling & Grinding Equipment
-
Model Oliver + Batlle - Paint Filling & Grinding System
More than 45 years manufacturing and developing machinery for the Paint and allied industries have allowed Oliver + Batlle S.A. to offer a wide range of high quality equipment and integral services to the market. Our design and manufacturing method encompasses 4 activities: Agitation, Grinding, Filling and Systems for all kind of products of médium and high viscosity. The study of projects involving production and filling lines including technical ...