4 products found
PF10 Impianti Industriali Products
-
Vacuum Evaporators and Concentration Units
The vacuum evaporation is the passage of state from liquid to gas that occurs at a temperature lower than boiling point of atmospheric pressure. This technique, that grants energy saving, is used to separate an involatile element from a solution, by obtaining deionized water and a concentrate.
-
PF10 - Model ETV Series - Single Effect Evaporators with Heat Pump
The ETV model is a vacuum evaporator/concentrator with heat exchanger submerged in the fluid to be processed or, on customer’s demand, with an outer shell and tubes exchanger. Moreover, PF10 is the sole manufacturer of exchanger with submerged plates. All PF10 evaporation plants can be manufactured in AISI 316 (std. version), duplex, super duplex, according to the characteristics of the fluid to be ...
-
PF10 - Model EDH Series - Double and Triple Effect Evaporators with Heat Pump
The EDH model is an evaporator of high energy efficiency. The power is supplied through a heat pump that employs a particular freon and exploits the thermal power of the fluid, evaporated during the first stage of evaporation, to supply a second stage of evaporation. This model allows to reduce the electric consumption of 40% than the similar single effect ETV model. The construction materials of this evaporator are the same as those used for the ETV and ...
-
PF10 - Model ETD Series - Heat Pump Evaporator
The ETD model takes advantage of the crystal precipitation when the solute overcomes the solubility limit. In order to obtain these outcomes, the plant has no submerged heat exchanger, but uses jacked exchangers to heat the fluids. The boiling tank is horizontal and the concentrate can reach the consistency of mud. The discharge occurs manually through the opening of the front ...
-
PF10 - Model ETW ME Series - Single Effect Evaporator
The ETW model is a vacuum evaporator/concentrator with heat exchanger submerged in the treated fluid or, at customer’s request, with an outer shell and tubes heat exchanger. Alternatively, PF 10 can install special submerged plates heat exchangers. These vacuum evaporators/concentrators exploit during the evaporation phase the thermal power supplied by hot water or steam and for the condensation phase the one produced by water from closed circuit ...