268 products found
Rotork plc Products
-
Electric Actuators and Control Systems
-
Rotork - Model IQ - Multi-Turn Third Generation Intelligent Electric Actuator
IQ3 Range multi-turn electric actuators can be used for isolation or regulating duties of up to 60 starts per ...
-
Rotork - Model CK - Standard Electric Actuators
CK range actuators are suitable for valves in non-hazardous locations. The modular product range facilitates a number of different control package configurations to meet your application requirements. • Modular design provides an off-the-shelf solution for spares and upgrading • Plug and socket connection for easier field wiring • Continuous valve position indication even during power loss • Non-intrusive setting via infrared or optional Bluetooth with ...
-
Rotork - Model ExMax Range - Part-Turn Explosionproof Actuators
Compact, robust and lightweight electric part-turn valve actuator, designed for use in Ex areas for all gases, mists, vapours and ...
-
Rotork - Master Station
The Rotork Master Station provides the high integrity link from the Distributed Control System (DCS) to the devices in the field. It comes complete with a large touch screen interface to allow operators and engineers to see exactly what is happening to the system and the field devices at any time. A hot standby Rotork Master Station allows for continued availability of the system in the event of a component failure. Host ports allow connection to multiple ...
-
Pakscan - Classic Field Network Add In Module (AIM)
Proven Control System: The Pakscan™ Classic redundant loop network has been the network of choice for actuator control for over 30 years. Using robust current loop technology, up to 20 km loop lengths and 240 field devices are ...
-
Rotork - Model CK Atronik - Electric Actuators
The Atronik control module adds an intermediate level integral solution to the modular CK range. CKA - Atronik isolating duty actuator. CKRA - Atronik modulating duty actuator. It offers modest control and feedback, and optimises the integral starter approach to offer simplified electronics, creating a robust control package for CK ...
-
Rotork - Model Q - Part-Turn Actuators
Small, electro-mechanical part-turn actuator environmentally sealed to ...
-
Rotork - Model IQM - Multi-Turn Modulating Electric Actuators
The modulating version of the IQ 3-phase electric actuator has a solid state reversing starter in place of the electro mechanical contactors. It features fast-response remote control circuits for rapid control. To optimise positional control, the solid state starter also adds an electronic motor ‘brake' ...
-
Rotork - Model ExMax+Lin/ExRun - Linear Explosionproof Actuators
ExRun and ExLin electric linear valve actuators are designed for use in Ex areas for all gases, mists, vapours and dust. Linear conversion for safety applications (Fail-safe function) in combination with ...
-
Rotork - Model IQML - Linear Modulating Electric Actuator
Benefiting from all the features of the IQM 3-phase electric actuator, the IQML has a linear output drive providing seating thrust output of up to 43 kN (9,667 ...
-
Rotork - Model ExCos/ExBin - HVAC Explosionproof Sensors and Switches
ExCos analogue sensors and ExBin binary switches are designed for direct use in hazardous locations. No additional modules in the panel required. No intrinsically safe wiring required. All parameters adjustable on site without additional tools or measuring devices. Sensors and switches for pressure, differential pressure, temperature and humidity available, Explosionproof design for all gases, mists, vapours and ...
-
Rotork - Model ROM - Electric Actuators
ROM actuators provide quiet and reliable operation for all kinds of small ball valves and butterfly valves, as well as dampers and ventilation louvres. They provide local indication and manual override options together with a wide range of ...
-
Rotork - Model CK Centronik Control - Electric Actuators
Comprising all the features of CK Standard actuators with the inclusion of integral starter and controls. CKC - Centronik isolating duty actuator. CKRC - Centronik modulating duty ...
-
Modbus Field Network Add In Module (AIM)
Industry Standard Networking: In addition to the Rotork designed network option, the Rotork Master Station also offers a Modbus® network all the way down to the field devices. The Modbus® RTU network is an RS-485 voltage based network in accordance with the Modbus® serial standard. Network baud rate is selectable up to 115 kbps, distance dependant, and network termination can be achieved within the ...
-
Rotork - Model AH Series - High-Cycle Actuator
The Rotork AH Series high-cycle actuator is ideal for the demanding service found under precipitators on the ash hopper flap gates. The totally-enclose design eliminates the high maintenance cylinder or low-pressure canister ...
-
Rotork - Model CT Series - Linear Damper Drive
The CT Series linear damper drive was designed specifically for fuel air and auxiliary air applications on CE / Alstom / T-fired / Corner-fired boilers. The CT Series provides excellent and efficient control of the Secondary Air within the windbox and will withstand the extreme heat and vibration common in this application. Effective windbox control will reduce NOx and minimise carbon monoxide (CO) associated with poor fuel-air mixing and will maintain ...
-
Rotork - Model CK Modularity - Electric Actuators
The modular design concept enables quick product configuration from stock to customer specification with a short lead time. Module combination enables Rotork to provide the optimal solution for the wide variety of customer applications. This benefits both suppliers and end users of CK range ...
-
Rotork - Model IQS - Multi-Turn Single Phase Electric Actuators
IQS is the 1-phase version of the IQ actuator. Direct torque range from 10 Nm to 450 Nm (7 lbf.ft to 332 lbf.ft). With second stage gearboxes, multi-turn output torque up to 9,700 Nm (7,154 lbf.ft) and part-turn up to 208,000 Nm (153,412 ...
-
Rotork - Model ROMpak - Electric Actuators
The ROM range of actuators can be enhanced with the addition of a self-contained control package to create a ROMpak actuator. This adds local controls, status indication relays, isolated control circuits and support for Rotork control options such as Folomatic, Pakscan™ and other bus ...
-
Rotork - Model ExReg - HVAC Explosionproof Control Systems
The ExReg controller system has been designed for use in Ex areas for all gases, mists, vapours and dust. In combination with Ex-Max actuators it is a closed loop control system for volume flow control (VAV, CAV), pressure, temperature and ...
-
Foundation - Fieldbus For Process Control Systems
Foundation Fieldbus has become widely accepted for use in process control systems. Its primary feature is the ability to distribute control away from the central ...
-
Rotork - Model IQD - Multi-Turn Direct Current Electric Actuators
IQD actuators are direct current powered versions of IQ actuators. Direct torque range 11 Nm to 305 Nm (8 lbf.ft to 225 lbf.ft). Voltage ranges available are 24, 48 and 110 VDC. With the addition of second stage gearboxes, DC multi-turn output torque up to 1,500 Nm (1,106 lbf.ft) and quarter-turn up to 132,000 Nm (97,358 lbf.ft) are ...
-
Rotork - Model CK Base Options - Electric Actuators
Reliable Valve Interfacing. CK actuator mounting flange dimensions are in compliance with ISO 5210 or MSS ...
-
Rotork - Model 400 Series - Electric Actuators
400 Series electric actuators use the reliable Planetary Torque Control System (PTCS), providing a highly efficient ...
-
Rotork - Model CK - Manual Operation Electric Actuators
Simple Engagement. Manual override on CK range actuators utilises the proven Rotork clutch design developed over the past 60 years. Handwheel operation is achieved through a lever mechanism that declutches the motor drive train and engages the geared handwheel drive train. Motor operation will automatically disengage handwheel mode if the lever remains in the rest ...
-
Rotork - Model PAX1 - Actuator Low Voltage Linear Actuators
The PAX1 is a flexible low voltage DC powered linear actuator featuring a 25 mm maximum thrust rod stroke moving at speeds up to 60 mm/min and a maximum thrust of 2,890 N (650 lbf) all in a flameproof ...
-
Rotork - Model IQH - High Speed Electric Actuators
Based on the multi-turn IQ actuator, IQH provides a range of high output speed actuators with integral epicyclic gearing. Gearing is optimised to be irreversible and provide a self-locking function for the valve. IQH actuators have been developed for diverter valves in meter prover applications that require fast operation with positive seating and zero ...
-
Rotork - Fire Protection Systems and Solutions
Rotork has the experience, know-how and product range to deliver virtually any actuation solution. Rotork products have long been chosen for their reliability and performance. Whilst these proven characteristics are certain under normal operating conditions, there are conditions that not even a standard Rotork actuator can operate in ...
-
Rotork - Model IQT - DC Electric Actuators
IQT part-turn 3-phase, 1-phase and DC electric actuators are designed for isolation or regulation duties (S2 & S3/Class A & B) of up to 1,200 starts per hour. Direct torque output range from 50 Nm to 3,000 Nm (37 lbf.ft to 2,214 ...
-
Rotork - Model CK - Switch Mechanism Electric Actuators
Mechanical Switch Mechanism (MSM). Instantaneous position and torque are sensed mechanically and IP67 rated micro switches provide end of travel indication as well as torque trip indication. The end of travel torque trip and position limits for both directions require intrusive mechanical ...
-
Rotork - Model IQT - Part-turn Battery Backup
The IQT Battery Backup actuator provides valve fail-safe operation by utilising power from a battery source during AC supply mains failure. Under normal supply conditions the actuator operates from the site AC electrical supply. On loss of this supply the actuator automatically switches over to receive power from a 24 VDC supply allowing control of the valve to the pre-configured ...
-
Rotork - Model IQTM - Part-Turn Modulating Electric Actuators
The modulating version of the IQT electric actuator is designed for modulating duty up to (S4/Class C). It features fast-response remote control circuits for rapid ...
-
Rotork - Model IQTF - Full-Turn Electric Modulating Actuators
IQTF electric modulating actuators are capable of multi-turn, rising output, linear output and direct rotary output. Includes special fast switching control inputs for hardwired ...
-
Rotork - Remote Hand Station (RHS)
The RHS enables safe and secure local monitoring and control of Rotork IQ3 Range actuators installed in inaccessible ...
-
Fieldbus - Foundation Actuator Control System
Foundation Fieldbus has become widely accepted for use in process control systems. Its primary feature is the ability to distribute control away from the central ...
-
Modbus - Process Communication Protocol Control System
Modbus remains the most popular process communication protocol in use today with the widest acceptance and highest number of applied systems of any automation ...
-
Model IQ 3-Phase - 3-Phase High Speed Electric Actuators
IQ 3-phase electric actuators for isolating, regulating or inching duties (S2 & S3 / Class A & B) of up to 60 starts / hour. Direct torque output range from 10 to 3,000 Nm (7 to 2,200 lbf.ft). With second stage gearboxes, multi-turn output torque up to 44,000 Nm (32,452 lbf.ft) and part-turn up to 826,888 Nm (609,881 ...
-
Model 400 Range - Multi-Turn, Part-Turn and Linear Actuators
400 Series electric actuators use the reliable Planetary Torque Control System (PTCS), providing a highly efficient ...
-
Control Systems
Control component packages are a part of any actuator / valve installation. Rotork has extensive experience in the design and assembly of all types of fluid power control systems to satisfy any customer requirement for on / off, modulating or ESD (emergency shutdown) service. Packages can be mounted on a panel or in a cabinet and mounted either on the actuator or at a remote location. Rotork offers components from all leading industry suppliers as well ...
-
Rotork - RHS - Remote Hand Station
The Remote Hand Station enables duplicated operation, interrogation and configuration of the latest SI actuators. For use when the actuator is located in a hazardous or inaccessible ...
-
Gearboxes and Gear Operators
-
Rotork - Model QTW150 - Manual Quarter-Turn Gear Operators
The QTW150 manual gearbox has been designed with simplicity in mind, resulting in a robust design with manufacturing optimised to deliver reliability and consistent performance. The QTW150’s simple, rugged construction makes it an ideal choice for quarter-turn valve ...
-
Rotork - Model SPI - Smart Position Indicator
The Smart Position Indicator is designed for use in chemical, petro-chemical, oil and gas industries, power plants and water ...
-
Mounting Kits - Ball, Butterfly and Plug Valve Kits
A complete range of precision CNC machined stainless steel or carbon steel mounting kits. With open or closed construction, mounting kits are engineered from certified material, individually bagged and labelled ready for ...
-
Rotork - Multi-Turn Gearboxes
Rotork has a wide range of multi-turn bevel/spur gearboxes which can be used for the most demanding manual and motorised applications for globe valves, gate valves and sluice gates. The output torque ranges up to 46,100 Nm and thrust range up to 4,350 kN. The multi-turn output gearboxes are available in various sizes and combinations with ratios from 1:1 to 360:1 and the majority of them can be used in all types of environment. Various options are ...
-
Roto Hammer - Model C Series - Chainwheel
Roto Hammer 'C' Series Chainwheels are highly robust and ideal for the heaviest industrial applications and highly corrosive ...
-
Roto Hammer - Chain Bar Wrench
The Roto Hammer Chain Bar Wrench provides an ideal solution for remote actuation of ball, butterfly, plug and other partial turn valves. When ordering, please provide length of chain required and dimensions so the chain bar wrench can be custom fit to your ...
-
Roto Wheel - Model C Series - With RCK Safety Cable Kit
The Roto Wheel combines two critical components for safe and dependable suspended valve operation: our Roto Hammer Chainwheel complete with the addition of a fitted, factory installed retaining cable safety kit (RCK). Simplify the ordering and installation process by purchasing a Roto Wheel (which combines our Chainwheels with the popular RCK safety kits) or buy the Chainwheel and RCK separately and install in the field. The Roto Wheel is available in all ...
-
Mastergear - Model A Series - Large Bevel Gears
'A' Series Bevel Gear Operators have been especially designed to operate valves and sluice gates, both in rising and non-rising stem ...
-
Mastergear - Model H Series - Large Bevel Gears
Product Features: For gate valves and sluice gates with rugged cast iron construction. Stainless Steel housing ...
-
Roto Wheel - Model CL Series - RCK Safety Cable Kit
The Roto Wheel combines two critical components for safe and dependable suspended valve operation: our Roto Hammer Chainwheel complete with the addition of a fitted, factory installed retaining cable safety kit (RCK). Simplify the ordering and installation process by purchasing a Roto Wheel (which combines our Chainwheels with the popular RCK safety kits) or buy the Chainwheel and RCK separately and install in the field. The Roto Wheel is available in all ...
-
Roto Hammer - Chain Storage Bucket
The Chucket Chain Storage Bucket holds overhead chain within easy reach and frees the pathway beneath, eliminating the safety hazard and hassle presented by suspended chain. The Chuckout combines the chain storage and safety features of the Chucket with an added Lockout/Tagout feature to prevent unauthorized access or operation of the ...
-
Roto Hammer - Model CL Series - Chainwheel
The Roto Hammer CL Series Chainwheel can be installed in minutes and provides an easy, inexpensive way to ensure employee safety and effective valve operation. Opening and closing valves becomes as easy as standing at ground level and simply pulling the chain to operate the chainwheel ...
-
Rotork - Direct Mount Chainwheel
Direct Mount Chain Wheels mount directly onto the gearbox input shaft by means of a pin or coupling and are suitable for use with every gearbox range in our product ...
-
Rotork - Model W100 - Shaft Direction Changing Gearbox
The W100 gearbox has been designed primarily to be used on AB and manual duty IW series gearboxes to change the input shaft direction by 90° for underground ...
-
Rotork - Extension Spindles
Remote actuator mounting can be achieved using valve extension spindles or pedestal adaptors. Lengths can be from 500 mm to 8 metres, (20" to 300") in stainless steel or carbon ...
-
Rotork - Model 242 - Quarter Turn Worm Gear Operators
The 242 range has been designed to optimise robustness and durability, whilst minimising non-structural mass and reducing the overall gearbox envelope by using the latest lean engineering principles and analytical design tools. The 242 series is based on the design and quality of the FB series which was designed to meet strict specifications. The 242’s simple, rugged construction makes it the gearbox of choice for low torque manual applications. ...
-
Rotork - Model IB - Multi-Turn Bevel Gearboxes
Rotork Series IB operators are multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for the most demanding motorised ...
-
Rotork - Model FB - Quarter-Turn Fire Protection
Quarter-turn cast iron gearbox suitable for use with fire protection (i.e. sprinkler) systems, includes limit switches to be incorporated into a supervisory electrical circuit. Designed and tested specifically to meet UL1091 specification and FM1112 ...
-
Rotork - Stainless Steel and Powder Coated Handwheels
125 mm to 2000 mm (5" to 80") diameter. Stainless steel or powder coated. Keyed, pinned or square drive. Fabricated or pressed design. Oval or round designs for small valves. Optional open and closed indication marking, locking flange, handle, specials, galvanised finish, rotating handle, flat or ...
-
Roto Hammer - Model E Series - Chainwheel
The Roto Hammer E Series Direct-Mount Chainwheel is designed to provide a truly custom fit. Instead of clamping on to the existing handwheel, the E Series mounts directly to the valve stem and replaces the handwheel. This eliminates the need for multiple clamps and hardware sets and provides a more streamlined, secure fitting of the chainwheel to the valve. The E Series can be bored to customer specifications or shipped solid for machining by the ...
-
Roto Hammer - Handwheels
Replacement handwheels can be ordered blank or custom fitted. If fitted, dimensional information is ...
-
Roto Wheel - Model E Series - RCK Safety Cable Kit
The Roto Wheel combines two critical components for safe and dependable suspended valve operation: our Roto Hammer Chainwheel complete with the addition of a fitted, factory installed retaining cable safety kit (RCK). Simplify the ordering and installation process by purchasing a Roto Wheel (which combines our Chainwheels with the popular RCK safety kits) or buy the Chainwheel and RCK separately and install in the field. The Roto Wheel is available in all ...
-
Mastergear - Stainless Steel Bevel Gear Operators
Heavy-duty stainless steel 316 housing multi-turn gearboxes suitable for the most demanding manual and motorised applications. Suitable for cast and fabricated sluice gates, gate valves, globe and pinch ...
-
Roto Wheel - Model M Series - RCK Safety Cable Kit
The Roto Wheel combines two critical components for safe and dependable suspended valve operation: our Roto Hammer Chainwheel complete with the addition of a fitted, factory installed retaining cable safety kit (RCK). Simplify the ordering and installation process by purchasing a Roto Wheel (which combines our Chainwheels with the popular RCK safety kits) or buy the Chainwheel and RCK separately and install in the field. The Roto Wheel is available in all ...
-
Rotork - Model RCK - Safety Cable Kits
Product Features: Provides an extra level of safety if the chainwheel should come unattached from the valve and fall. 3 sizes to fit the complete line up of Roto Hammer Chainwheels (CL, C, E & M Series) - Unit comes complete with - stainless steel cable, clamps and stainless steel shackle (1/4 and 5/16 only). RCK Safety Cable Kits are sold separately or come factory installed as part of a Roto Safety Wheel ...
-
Roto Hammer - Model M Series - Hammer Blow Impact Actuator Chainwheel
Under certain conditions, manually operated valves can be difficult to open and close. The valve may stick, freeze, or be used so rarely that its internal parts become fused. In addition, large valves are often difficult to operate when using a standard chainwheel. In answer to these problems, Roto Hammer offers the M Series Hammer Blow Impact Actuator. The Hammer Blow mimics the motion of a hammer striking an anvil and delivers a quick, measured blow ...
-
Rotork - Model IB-AWWA C560 and C561 - Multi-Turn Operators
The IB AWWA C560 and C561 series of multi-turn operators are suitable for manual actuation of AWWA C560 cast iron gate valves and C561 fabricated stainless steel gate valves. Designed with AWWA C560 and C561 specifications in mind, they are manufactured from high quality and reliable ...
-
Rotork - Lever Arm Range for Damper Operation
Lever arms for damper operation. Used on dampers to transfer the 90 degree operation from the worm gearbox to the damper spindle. This is an optional feature on all IW and MTW ranges of worm ...
-
Rotork - Model 232LX - Light Duty Cast Aluminium Quarter-Turn Gearboxes
Light duty cast aluminium quarter-turn gearboxes with integrated limit switches for remote position indication suited for fire protection. Torque range up to 500 Nm (366 lbf.ft). 2 sizes. Ratios 37:1 to 45:1. Integrated limit ...
-
Model IS - Manual Multi-Turn Spur Gearbox
Rotork Gears Series IS operators are Multi-turn (rotary) devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Rotork - Model ABLX Range - Cast Iron Auarter-Turn Manual Gearboxes
Cast iron quarter-turn gearboxes with integrated limit switches for remote position indication suited for fire protection. Torque range up to 1,620 Nm (1,196 lbf.ft). 4 sizes. Ratios from 34:1 to 40:1. Integrated limit ...
-
Roto Hammer - Model M Series - Clamp-On Impact (Hammer Blow) Actuator
Under certain conditions, manually operated valves can be difficult to open and close. The valve may stick, freeze, or be used so rarely that its internal parts become fused. In addition, large valves are often difficult to operate when using a standard chainwheel. In answer to these problems, Roto Hammer offers the M Series Hammer Blow Impact Actuator. The Hammer Blow mimics the motion of a hammer striking an anvil and delivers a quick, measured blow ...
-
Roto Hammer - Replacement Parts
Available replacement parts: Chain Guide. Set Collar. Anvil. CL Series Clamp Set. C Series Clamp Set. M Series Clamp ...
-
Roto Hammer - Right Angle Gearbox
The Roto Hammer Right Angle Gearbox is designed for applications where 90 degree direction change is required, from vertical to horizontal or vice versa. The gearbox can be used in conjunction with Roto Hammer Valve Extensions, Handwheels, and Chainwheels. It is a 1:1 ratio ...
-
Roto Hammer - Model M Series - Direct-Mount Impact (Hammer Blow) Actuator
Under certain conditions, manually operated valves can be difficult to open and close. The valve may stick, freeze, or be used so rarely that its internal parts become fused. In addition, large valves are often difficult to operate when using a standard chainwheel. In answer to these problems, Roto Hammer offers the M Series Hammer Blow Impact Actuator. The Hammer Blow mimics the motion of a hammer striking an anvil and delivers a quick, measured blow ...
-
Rotork - Model BR Series - Quarter-Turn Manual Gearboxes
The BR series gear operators are manufactured from high quality cast aluminium bronze and stainless steel materialsand designed for extended life operation of valves in corrosive man hole and vault steam distribution environments where road salts, standing water and elevated temperatures are ...
-
Rotork - Model DSIR Range - Dual Speed Input Reducer
The Dual Speed Input Reducer is used to reduce the number of input turns required, and therefore the operating time, on manual gearbox applications. It can be used with any manual gearbox which can be fitted with an F14 or FA14 input ...
-
Model DSB Range - Dual/Triple Input Bevel
Complete range of multi-turn bevel gearboxes with two shafts for use with dual stem sluice gates and ...
-
Roto Hammer - Galvanised Chainwheels
Especially harsh operating environments sometimes necessitate an extra level of protection for chainwheels. Many chainwheels are used in the petrochemical industry, where they are exposed to chemicals, extreme temperature or humidity. In such cases, we offer galvanized chainwheels to extend the life of the product in corrosive ...
-
Rotork - Model IW Range - Quarter-Turn Worm Gear Valve Operators
The IW range of quadrant Worm gear valve operators is available in manual and motorised configurations and features a removable sleeve to facilitate bore and keyway machining. This sleeve can be rotated in steps to facilitate mounting to the ...
-
Roto Hammer - Roto Link and Lock Link Chain
The Roto Link is a one piece, stainless steel, universal link designed to connect loose ends of Lock Link Chain when used in conjunction with our Roto Hammer Chainwheel Actuators. This prevents the hassle of cutting and twisting chain to close the loop. Simple installation can be accomplished with either vise-grips or pliers used to close the open ends around the next link of chain. Roto Links are made of T302 annealed stainless steel for its ...
-
Roto Hammer - Valve Stem Extensions
Regardless of the distance between points, elevations, directional flows and space constraints, we can engineer a Roto Hammer valve operation system that will work for you. No company can afford downtime, and with our Custom Solutions for valves, you’ll be back up and running ...
-
Rotork - Model IW - AWWA C504 and C517 - Quarter-Turn Gearboxes
The IW AWWA worm gear operators are suitable for manual actuation of AWWA C504 butterfly and C517 plug ...
-
Roto Hammer - Stainless Steel Chainwheels
Especially harsh operating environments sometimes necessitate an extra level of protection for chainwheels. Many chain wheels are used in the petrochemical industry, where they are exposed to chemicals, extreme temperature or humidity. In such cases, we offer stainless steel chainwheels to extend the life of the product in corrosive ...
-
Rotork - Model HOB/MPR - Bevel Gear Operators
Hand operated bevel gears suited for sluice gates, gate, and globe valves. Torque range up to 8,018 Nm (5,914 lbf.ft). Thrust range up to 1,557 kN (350,028 lbf). 12 sizes. Ratios from 2:1 to ...
-
Rotork - AB - Quarter-Turn Manual Gearbox
The AB range of quarter-turn operators have a cast iron housing and are intended for applications in chemical, power, waterworks, HVAC and most general industrial ...
-
Rotork - Model HOS/MPR - Hand Operated Spur Gear Operators
The HOS/MPR gear operators are manufactured from high quality materials and life tested ensuring that maximum performance, quality and reliability are consistently maintained. Operating temperature normally ranges from -40 ºC to 120 ºC, although other temperature ranges are available on ...
-
Roto Hammer - Custom Painted Chainwheels
Roto Hammer Chainwheels are primed in the trademark Roto Hammer blue colour. However, we understand that some customers prefer a custom colour to match their facilities. In these situations, we are happy to custom paint any of our chainwheels to match a customer specified colour. Please contact us for information on pricing and lead time for custom painted ...
-
Rotork - Model ABAW-AWWA C504 and C517 - Manual Worm Gear
The ABAW AWWA C504 & C517 worm gear operators are suitable for manual actuation of AWWA C504 butterfly valves and C517 plug valves. They are designed to meet or exceed all aspects of AWWA C504 & C517 specifications and are manufactured from high quality and reliable materials. Overload and life tests reports are available upon request. All Rotork Gears actuators are made to ISO 9001 ...
-
Rotork - Model MTW Range - Multi-Turn Worm Gearboxes
Multi-turn worm gearboxes used for applications such as sluice gates and ...
-
Rotork - Model AB-CS - Quarter Turn Continuously Submerged Gears
The Rotork Series AB-CS quarter-turn gear operators are rugged, industrial grade products designed to be continuously submerged in both clean and corrosive ...
-
Rotork - Model AB-SS Range - Quarter Turn Stainless Steel Gearbox
The Rotork Series AB-SS quarter-turn gear operators are rugged, industrial grade products manufactured with stainless steel housing ...
-
Model WG-SS Range - Stainless Steel Part-Turn Gearbox
Heavy-duty stainless steel 316 housing part-turn gearboxes suited for plug, ball and butterfly valves serving the water, gas, chemical and power industries in corrosive ...
-
Rotork - Model ABM Range - Motorised Quarter-Turn Gearboxes
The ABM Series are rugged, industrial grade products manufactured with cast iron housing components, featuring a polyurethane coating and high performance axial ...
-
Rotork - Model IB/AS - Gearbox Combinations
Rotork Gears Series IB/AS Combination operators are Multi-turn devices intended for the operation of gate, globe, sluice and penstock valves. These gearboxes are suitable for manual and motorised ...
-
Rotork - Model WGS Range - Quarter-Turn Subsea Gearboxes
The WGS range of quarter-turn operators are designed for heavy-duty subsea applications at any depth with carefully chosen materials to offer the highest level of reliability required in this very harsh ...
-
Rotork - Model 232 Range - Quarter-Turn Aluminium Valve
The 232 range of quarter-turn operators have a dye cast aluminium housing and are intended for applications in power waterworks and gas pipelines, HVAC, fire protection and most general industrial ...
-
Rotork - Model ILG-D Range - Declutchable Override Quarter-Turn Gearboxes
Complete range of manual declutchable sandwich override quarter-turn gearboxes for double acting pneumatic ...
-
Rotork - Model ILG-S Range - Override Quarter-Turn Gearboxes
Complete range of sandwich manual override quarter-turn gearboxes for spring-return pneumatic ...
-
Rotork - Model MOW Range - Heavy Duty Quarter Turn Modulating Gearboxes
Heavy duty quarter-turn modulating gearboxes suited for control ...