18 products found
Synspec BV Products
-
Synspec - Synspec GC955 Series
Synspec GC955 series of gas chromatographs are available for a number of applications e.g. BTEX, ozone precursors and methane/THC monitoring.
-
Synspec - Model GC955 601 - Monitoring of Benzene, Toluene, Ethylbenzene, Xylenes (BTEX) Analyzer
Monitoring of benzene, toluene, ethylbenzene, xylenes (BTEX) and other hydrocarbons in the ambient air. Synspec GC955 601 gas chromatograph (GC) is built specifically for the measurement of BTEX in ambient air. It can be utilised to simultaneously detect and measure up to 40 different components. The settings of the system can be also customised to include specific components that the client needs to ...
-
Synspec - Model GC955 611/811 - Ozone Precursor Hydrocarbon Analyser
Ozone precursors measurement in the ambient air. Synspec GC 955 series 611/811 is a combination of two gas analysers for online continuous monitoring of ozone precursors in the ambient air. GC 955 811 is specifically designed for the measurement of the hydrocarbons from C2 up to C5 and the model 611 for the hydrocarbons from C6 up to C12. With the combination of these two GCs nearly all of the compounds from the US EPA PAMS list can be measured ...
-
Synspec - Model GC955 810 - Mercaptan and Sulfide Analyser
Monitoring of Sulfur Compounds in the Ambient Air. Synspec GC 955 810 gas chromatograph is specifically designed and built for the measurement of sulfur compounds in the ambient air. The two prominent groups of sulfur compounds that can be detected with this GC are mercaptans and sulfides but additional components such as benzene can be added also. The instrument is equipped with a built-in cooled pre-concentration system and PID detector. The analyser ...
-
Synspec - Model GC955 118 - Methane/THC Analyser
Fast mid-range measurements in cities or near industrial areas. The GC955 118 Methane model from Synspec is specifically designed to provide fast mid-range measurements in cities and near industries. It is equipped with a compact oven with a column that separates methane from other hydrocarbons, and features an FID detector resulting in two distinct peaks: one for methane and one for total non-methane hydrocarbons (TNMHC). The GC955 118 model holds a CE ...
-
Synspec Alpha Series
Synspec Alpha series of gas chromatographs are compact analysers developed for mid-range air monitoring measurements in cities or industrial areas.
-
Synspec - Model Alpha 115 - Methane/TNMHC Analyser
Mid-range air measurements in cities or near industrial areas. The Alpha 115 Methane/TNMHC Analyser is a gas chromatograph (GC) specifically designed to measure concentrations of greenhouse gas methane in the ambient air. Simultaneously, the analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that the instrument does not only measure the ...
-
Synspec - Model Alpha 116 - Methane/TNMHC Analyser
High-range stack measurements up to 1000 ppm. Synspec Alpha 116 gas chromatograph (GC) is built for continuous stack monitoring with high-range detection limits, up to 1000 ppm. Alongside the measurement of greenhouse gas methane, the analyser detects and presents the sum of all other hydrocarbons, ensuring precise measurement of the total air pollution. The method utilised ensures that the instrument does not only measure the concentrations of the ...
-
Synspec - Synspec Delta Series
Synspec Delta series of gas chromatographs are compact analysers developed for industrial applications.
-
Synspec - Model Delta 100 & Delta 300 - Toxic Hydrocarbon Analyser
Monitoring single toxic hydrocarbons for the industrial applications. Synspec Delta 100 and Delta 300 analysers are gas chromatographs (GCs) built specifically for the industrial applications to ensure worker safety, emissions and process control. Depending on what component and its concentration you need to measure, our team will develop and install an appropriate detector, columns, sample collection system and application ...
-
Synspec - Model Delta 116 - Continuous Emissions Monitoring System (CEMS)
Continuous emissions monitoring system (CEMS) for high-range stack measurements. Synspec Delta 116 is a continuous emissions monitoring system (CEMS) built specifically for high-range stack measurements according to US EPA 25A. The analyser provides the sum of all other hydrocarbons in the same measurement cycle for better determination of the total air pollution. The method utilised ensures that the instrument does not only measure the concentrations of ...
-
LSE Monitors
LSE Monitors is a sister company from Synspec, specialised in photo-acoustic measurements with quantum cascade and diode lasers. Currently we have applications to specifically measure ammonia (NH3) or nitrous oxide (N2O) in ambient air down to the ppb level.
-
Synspec - Model LSE NH3-1700 - Low PPB Ammonia Monitor for the Measurement of NH3 in Air
Ammonia from animal farms and industrial processes are getting more and more attention from governmental organisations. In higher concentrations the smell becomes a problem. Nowadays regulations are becoming more strict to reduce ammonia emisions. The robust and sensitive ammonia analyser from LSE Monitors is designed for continuos online measurements for ambient air or for measurements in ...
-
Synspec - Model LSE N2O-4405 - Ultra Sensitive N2O Monitor for Ambient Air and Stack Measurements
Nitrous oxide (N2O) is a man-made green house and ozone depletion gas. Emissions from agriculture are the main source, followed by industry and energy plants. Although the concentration of N2O in the atmosphere is relatively high (330 ppbv), the day and night fluctuations are small and so are seasonal differences. Therefore, highly sensitive and stable instrumentation is needed to monitor N2O emissions in the atmosphere. This instrumentation was not ...
-
Auxiliary Equipment
Find below an overview of the auxiliary equipment that is recommended for use in combination with Synspec analysers.
-
Synspec - Water Purge Unit (WPU) for Toxic VOC in Water
Accessory to Measure Volatile Organic Hydrocarbons in Water with a GC. Synspec Water Purge Unit (WPU) has been specifically developed to strip volatile organic hydrocarbons from water, and should be used in combination with a Synspec gas chromatography (GC) system. By using this combination of a WPU with a GC it is possible to determine the concentrations of hydrocarbons in ...
-
Synspec - Sample Conditioning Unit (SCU)
Bring your air samples in the right condition for the analysis by a gas chromatograph (GC). Improve the analytical quality of your gas chromatographic measurements by removing dust and excess humidity from your air samples. The built-in Perma Pure Nafion™ dryer is able to remove water without stripping hydrocarbons. The quality of the dried air sample is continuously monitored with a humidity sensor (optionally an alarm threshold can be communicated ...
-
Synspec - VOC Monitoring Calibrator System
For the accurate and reliable monitoring of VOC concentrations, every analytical instrument needs to be calibrated periodically. Synspec supplies various multi-point calibration stations for the validation of your ...
-
Auxiliary Equipment - Gas Generators
For the reliable operation of your gas chromatograph (GC), the continuous supply of high-quality gasses is essential. Whether it is your carrier gas or detector gas, Synspec can supply proper gas generator for your system. We supply the following gas generators: H2 + Air, H2 + N2 + Air, H2, N2.
-
Synspec Fidstation - Model 50RC-70/2000 - High Purity Hydrogen & Zero Air Generator
Synspec supplies the Fidstation RC product line of High Purity Hydrogen & Zero Air generators with compressor to supply all gases necessary to aliment the FID detector, close to the consumer, in an elegant 19” casing with full color display and touchpad. The FID Station is composed of a High purity Hydrogen generator and an Ultra Zero Air generator with on board Air compressor. Based on the field proven Solid Polymer Electrolyte (PEM) cell ...
-
Synspec - Model GC Station Ultra RC-CAT-70/2000/70 - High Purity Hydrogen Nitrogen & Zero Air Generators With On Board Compressor
Synspec supplies the GCSTATION ULTRA RC product line of High Purity Hydrogen & Zero Air & Nitrogen generators with compressor to supply independently all gases necessary to aliment GC and GC/MS, close to the consumer in 2 elegant 19’’ Rack casing with full color display and touchscreen. The GCSTATION ULTRA RC is composed of an High purity Hydrogen generator and Zero Air and Nitrogen generators and an AIR compressor ...
-
Synspec Nitrostation - Model 50RC-100 - Ultra High Purity Nitrogen Generator, HC Free, With On Board Compressor
Synspec supplies the NITROSTATION50RC product line of Ultra High Purity Nitrogen Generator with integrated Air compressor, to fit almost any type of application which needs independent supply of pure Nitrogen close to the consumer in an elegant 19” casing with full color display and touchpad. Compressed Air is first filtered from particulates down to 5µm and dried by a static dryer. Based on the field proven Pressure Swing Adsorption (PSA) ...
-
Synspec - Model HYDRO50R - High Purity Laboratory Hydrogen Generator
Synspec supplies the HYDRO50R product line of High Purity Hydrogen Generator modules for FID and CARRIER GAS for GC, to fit almost any type of application which needs H2 production close to the consumer. Based on the field proven Solid Polymer Electrolyte (PEM) cell technology, pure Hydrogen is produced at low pressure from electricity and high quality distilled water (ZEROWATER). This process can be started on demand and does not require any caustic ...
-
Synspec - Cooled Sample Conditioning Unit (Cooled-SCU)
The Synspec Cooled Sample Conditioning Unit (Cooled-SCU) is developed for the effective removal of high concentrations of humidity from your sample gas. Heart of the instrument is a cooled loop that removes the humid from the sample gas. All internal tubing of the Cooled-SCU is made of inert materials, making this Cooled-SCU in particular suitable for the analysis of sulphur containing components and all other demanding ...