air-heat-exchanger Downloads
56 downloads found
Premium
ANGUILSYSTEM INFORMATIONREPORTED VALUESCOMBUSTION AIR hours/daySCFM days/weekF weeks/yearPROCESS AIR EXHAUST AIRSCFM SCFMF FCOST OF FUEL /MM BTUPROJECTED VALUES WITH ENERGY RECOVERY SYSTEMAVAIL. HEATEDCOMBUSTION AIR RETURN AIRSCFM SCFMF FPROCESS AIR EXHAUST AIRSCFM SCFMF FFRESH AIRSCFMFTOTAL ENERGY RECOVERED MM BTU/HRADJUSTMENT ...
Premium
Energy Recovery Opportunity ...
Premium
Some of the same strategies we’vedeveloped to drive down the operating cost of pollution control equipment canbe applied throughout your plant to improve your bottom line.One example of this is Anguil’s Shell & Tube Heat Exchanger. For over 25years Anguil’s Shell & Tube Heat Exchanger has played a major role inhelping customers ...
This catalogue contains description and basic technical data of three-phase high-voltage slipring induction motors with air - air heat ...
Premium
ANGUIL Committed to Energy Recovery. Heat & Power Products: Plate Heat Exchanger ANGUIL ENVIRONMENTAL SYSTEMS, ...
Deep Series 33 W/°C air to air heat exchangers for 12″ deep ...
(972) 580-0200 or (888) 580-0202 • www.thermal-edge.com • thermalinfo@thermal-edge.com AIR TO AIR HEAT EXCHANGERS HEAT PIPE TECHNOLOGY CLOSED LOOP DESIGN AVAILABLE IN 120, 230, 24VDC & 48VDC NEMA TYPE 12, 4 AND 4X UL LISTED FOR STANDARD AND HAZARDOUS LOCATIONS (972) 580-0200 or (888) 580-0202 • ...
Eclipse Cross-Flow Recuperators are compact tubular air-to-air heat exchangers designed to recover the waste heat in industrial exhaust gases. The recovered heat is used to preheat the combustion air for the system’s burners, thereby increasing the thermal efficiency. To ...
The product´s main feature, however, is the significantly increased yield, especially in the partial-load range.The use of high-quality permanent magnets instead of electrical excitation power results in higher energy yield.The generator and the air-to-air heat exchanger cooling system are fully enclosed, dispensing with the need ...
The Ultra Low Dew Point Dryers include an air-air heat exchanger to lower incoming air temperature with the out going chilled air. The Ultra Low Dew Point Chillers include an air to refrigerant Pre-Cooler (in lieu of air-air ...
The particular configuration of the cooling pipesincrease the turbulence of the fluid consequently of the exchange capacity; moreover, the presence of specialjets on the cooler finning further improves the totaltransmission coefficient.The result is a very small, light and robusttechnologically advanced product.The air-oil ...
Output categories 375 – 5,000 W. For use in tough environments. Convenient mounting options and flexible water connection options. Partial or full internal mounting ...
Air-cooled heat exchangers may be applied when water is not available or required heat removal can be achieved with an air-cooled heat exchanger. Air-cooled heat exchangers are available in a range of finned tube designs, including electrically driven air blast ...
The AquaVent AVI is a reliable, low-maintenance, air-cooled heat exchanger. The AVI is widely used to cool closed-loop processes where the fluid temperature is close to ambient. It also offers a lower-cost solution for free-cooling applications, compared to expensive refrigerant chillers. ...
Dispensing with a gearbox means lower repair and maintenance costs and a higher yield.High-quality permanent magnets pre-vent electrical excitation losses, which additionally increases the energy yield.The generator cooling system with air-to-air heat exchangers is fully en-capsulated, protecting it from salty air, humidity, dust and dirt.The blade pitch system with a toothed belt drive is ...
VENA Optima recuperators: compact air handling unit with a counter flow heat exchanger, adjusted air exchange and heat recovery from ventilation with 75-90% efficiency, capacity: 350 – 1200 m3/h, energy ...
We Dispensing with a gearbox means lower repair and maintenance costs and a higher yield.High-quality permanent magnets pre-vent electrical excitation losses, which additionally increases the energy yield.The generator cooling system with air-to-air heat exchangers is fully en-capsulated, protecting it from salty air, humidity, dust and dirt.The blade pitch system with a toothed belt drive is ...
Lower repair and maintenance costs through high-quality and durable components. Fully encapsulated generator cooling system with air-to-air heat exchangers. High-quality permanent magnets for a higher energy yield.Low-wear and low-maintenance blade pitch system with toothed belt ...
Unique counterflow aluminum core for high-efficiency and high-performance heat transfer, except for the XR20 and XR29-08 which use a modified heat pipe core. Models for 115 and 230 VAC power input. UL Listed or Recognized to save customers time and money with agency approvals. Operating temperature range from -20 F/-29 C to 140 F/60 C. Streamlined aesthetics with no visible mounting rails; Slim ...