biogas biological desulfurization Downloads
-
BIDOX Biological Desulphurization of Gas Streams Brochure
One of the most efficient systems for the biological removal of sulphides from biogas is the BIDOX (BIological Desulphurization by OXidation). No chemicals are needed to operate the BIDOX system. The installation requires limited maintenance, is equipped with little process control and manages to reduce the amount of H2S in biogas to levels below 50 ppm. These features have a significant positive ...
-
dBiox - Bioscrubber for Biological Desulfurization of Biogas - Brochure
dBiOX Bioscrubber comprises a biological system in two stages that facilitates the immediate absorption and transformation of contaminants in an alkaline medium, obtaining transfer efficiencies greater than 99% and thus achieving emissions of undiluted biogas free of ...
-
Model ECO - Automated Gas Cleaning Systems Brochure
Easy to ship worldwide; the gas cleaner can be shipped on a truck or in one 40 feet container. The PTU – the Process Technique Unit - is the machine room and contains PLC controller board, circulation pump, air blower, valves, flow meters and – if required – also gas detector system and heating system installed in a small custom built fiberglass container. The scrubber tank is ...
-
BioGasClean - On-Site Tank for Biological Removal of High H2S Loads - Brochure
BioGasclean supplies a full range of biological H2S removal systems. The system with tanks built on-site is used at ethanol distilleries and paper mills. Each BiogasCleaner is designed to the project specific biogas flow and H2S load and comprise the following 3 main systems: The PTU - Process Technique Unit - is the machine room and contains circulation pumps, air blowers, PLC controller board, ...
-
Chillers System - Brochure
After H2S removal the gas is fully saturated with water; the relative humidity (RH) is 100%. If water droplets should reach the cylinder heads and combustion chambers the water will destroy the oil film. This will lead to increased wear of moving parts as well as substantial reduction of the lifetime of the engine oil. Therefore, it is necessary to dry the gas to avoid condensation in the pipe ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you