CHP cogeneration Downloads
-
InteliSys- BaseBox - Model NT - Complex Parallel and Cogeneration (CHP) Genset Controller Brochure
InteliSys NT is a premium control product, which is designed for complex generator (standby and parallel) and cogeneration (CHP) applications involving single and multiple gen-sets. The model features a built in synchronizer, load sharing, built-in PLC functions and extensive communication with electronic engines using J1939 and CAN ...
By ComAp a.s.
-
R Schmitt Enertec - CHP Cogeneration Units- Brochure
The Gas Engines of the M Series of R Schmitt Enertec are the base of our compact ENERGIN CHP units. ENERGIN® CHP are easy to install and save on space because all components as the drive unit, heat exchangers, pumps, silencers, controls and switchgear are mounted on a common frame and are ready piped and cabled. The optional sound enclosure is mounted on the same frame and reduces the sound ...
-
Agricultural Biogas and CHP / Cogeneration - Brochure
The farming industry offers a range of potential applications for agricultural biogas systems. Arable land can be used to grow crops which are fed into dedicated digestion systems. Alternatively waste products from the farm can be harnessed to provide renewable energy. Agricultural digestion systems are typically sized between 0.5 and 3.0MW electrical output. The heat produced by the engines is ...
-
Cogeneration (CHP), Trigeneration, Quadgeneration - Brochure
Through on-going investment in research and development, GE's gas engines are highly efficient at the conversion of the energy within gas into electrical energy. Electrical generation plants come in two main forms: Stable base load (continuous) generation, Electricity ...
-
Biogas from Organic Waste and CHP / Cogeneration - Brochure
Disposal and treatment of biological waste represent a major challenge for the waste industry. For a wide range of organic substances from agriculture, foodstuff of feed industries, anaerobic digestion is a superior alternative to composting. Biogas - a mixture of both methane and carbon dioxide - is created during anaerobic digestion and serves as a high-energy renewable fuel that can be used as ...
-
Burkhardt - Model CHP ECO EG - Cogeneration Units with Natural Gas Brochure
As standard, we offer six different cogeneration classes from 135 to 355 kWe. The range of power levels means that we have just the cogeneration unit for you ...
-
Hospital Cogeneration (CHP) - Brochure
There is increasing pressure on the hospitals and healthcare sectors to improve efficiency. With respect to energy this takes three key forms: Making limited financial resources go further, Improving energy efficiency, Reducing carbon emissions. Using a combined heat and power (CHP) plant in a hospital is an ideal way of achieving each of these three targets. Natural gas is a clean-burning low ...
-
Greenhouse Cogeneration (CHP) - Brochure
Gas engines are highly efficient at providing the stimulus for the growth of plants, whilst in parallel providing a flexible supply of electrical power. Heat, light and carbon dioxide (CO2) all promote plant growth. Gas engines provide electrical power at the alternator and when in a cogeneration configuration can also recover useful heat. Carbon dioxide is released in the exhaust gases of the ...
-
4-Pole DG Generator Brochure
The 4-Pole DG generator range, driven by gas or steam turbine, outputs from 10 MVA - 65 MVA. Globally, 600 units operate in public utility, cogeneration, CHP, industrial and offshore applications. Designed, assembled and tested in Holland at an ISO accredited site, the range is built on 130 years of consultative generator expertise offering customers bespoke turnkey products with comprehensive ...
By Brush Group
-
Brush - 2-Pole Generators Brochure
BRUSH DAX cylindrical rotor, air cooled generators are extensively used in public utility, cogeneration, CHP, industrial and offshore applications. These generators are designed to be driven by both steam turbines and gas turbines, with extensive operational experience of both applications. BRUSH has more experience of the use of gas turbines than any other generator manufacturer in the world and ...
By Brush Group
-
GE - Model 6F - Gas Turbine -Brochure
GE’s 6F gas turbines offer the superior performance, reliability, and flexibility typically associated with larger power plants. The 6F models, including the 6F.01 and the 6F.03 gas turbines, pack a lot of power into a small package, offering durability and flexibility for harsh, remote, or floating power environments. Whether it be for 50 or 60 Hz, the 6F gas turbines maintain ...
By GE Power
-
Combined Heat and Power Systems (CHPS) - Brochure
Senergie CHP units not only produce energy, they convert up to 95% of the used primary energy into power and heat. Through our cogenerated heat and power units, much higher rate of fuel utilization can be reached than through separate electricity and heat production. Here substantial amounts of energy and thus emissions can be saved. Since natural and propane gas have the lowest CO2 and particle ...
-
Natural Gas Brochure
cogeneration plants (CHP) highly efficient. Power generation in a natural gas CHP plant from 2G can ...
By 2G Energy AG
-
EC Power - Model XRGI 25 - Combined Heat and Power Plant - Brochure
The XRGI® is a combined heat and power plant (CHP) that works on the principle of cogeneration. An XRGI® system consists of three main components: the Power Unit, Q-Heat Distributor and the iQ-Control Panel. In addition, you can also extend your XRGI® system with a storage tank with a capacity of 500, 800 or 1,000 litres for optimum ...
By EC Power A/S
-
Model Flux-i 15 kW_e - Woodchip Power Generator Brochure
Making baseload heat and power. To use grid tie or offgrid 15.000 Watt_electrical power. Heat production 30.000 Watts_thermal power. Woodconsumption 140-160 tons / year @ 8.000 hours/year. Works without any grid, offgrid usage any time. Can be used for any (all) kinds of ...
-
Model Flux-i 29 kW_e - Woodchip Power Generator Brochure
Making baseload heat and power. To use grid tie or offgrid 29.000 Watt_electrical power. Heat production 60.000 Watts_thermal power. Biomassconsumption 290-300 tons / year @ 8.000 hours/year. Works without any grid, offgrid usage any time. Can be used for any (all) kinds of ...
-
Model Flux-i 10 kW - Woodchip Power Generator Brochure
Making baseload heat and power. To use grid tie or offgrid 10.000 Watt_electrical power. Heat production 10.000 Watts_thermal power. Woodconsumption 80-100 tons / year @ 8.000 hours/year. Works without any grid, offgrid usage any time. Can be used for any (all) kinds of ...
-
Model Flux-i 15 kW_e - Biomass Generator with Cooling Power Brochure
Making baseload cold and power. To use grid tie or offgrid 15.000 Watt_electrical power. Heat production 20.000 Watts_cooling power. Biomassconsumption 100...120 tons / year @ 8.000 hours/year. Works without any grid, offgrid usage any time. Can be used for any (all) kinds of ...
-
Model Flux-i 29 kW_e - Biomass Generator with Cooling Power Brochure
Making baseload cold and power. To use grid tie or offgrid 29.000 Watt_electrical power. Heat production 40.000 Watts_cooling power. Waste Biomasss consumption 200...250 tons / year @ 8.000 hours/year. Works without any grid, offgrid usage any time. Can be used for any (all) kinds of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you