combustor Downloads
-
Premium
Anguil - Vapor Combustor - Enclosed Flare - Brochure
Thermal flaring technologies used for the destruction of Hydrocarbons, Volatile Organic Compounds (VOCs) or Hazardous Air Pollutants (HAPs) are designed in two basic configurations; open and enclosed flame burners. Recent regulations on visible emissions, vapor radiation, Greenhouse Gases (GHGs) and noise pollution have driven industry away from open flaring and towards the enclosed vapor ...
-
Paradigm Brochure
Paradigm Precision, established in 2011 is a privately owned enterprise formed by the acquisition of Turbo Combustor Technology, Paradigm Precision Holdings, and Unison Engine Components (3 locations). The Company operates on a global basis and is sponsored by the Carlyle Group and ...
-
Plantec - Vertical Combustor Brochure
Turning waste into fuel for perfect combustion. SLA Combustion Method – Turning waste into dried solid residues and combustible gas. The Vertical Combustor employs ‘SLA Combustion Method’ invented by Plantec Inc., parent company of Plantec Argonaut Pte. ...
-
ASHCOR - Model 100 - Standard Enclosed Combustor - Datasheet
ASHCOR Standard Combustors are made of a stainless steel body and designed to withstand heavy wind, harsh oil and gas environments and other stringent conditions. Built to promote environment and site safety, ASHCOR Standard Combustors have distinct features such as minimal noise pollution and reduced radiant heat. Enclosed Flares are equipped with ASHCOR flame arresters and Flame Smart burner ...
By ASHCOR
-
Udimet - Model 188 - High Performance Alloys Brochure
UDIMET alloy 188 (UNS R30188) is a cobalt-base alloy with excellent high-temperature strength and good oxidation resistance to 2000°F (1093°C). The high chromium level coupled with small additions of lanthanum produce an extremely tenacious and protective scale. The alloy also has good sulfidation resistance and excellent metallurgical stability as displayed by its good ductility after ...
-
ASHCOR - Model 20 - Standard Enclosed Combustor - Datasheet
ASHCOR Standard Combustors are made of a stainless steel body and designed to withstand heavy wind, harsh oil and gas environments and other stringent conditions. Built to promote environment and site safety, ASHCOR Standard Combustors have distinct features such as minimal noise pollution and reduced radiant heat. Enclosed Flares are equipped with ASHCOR flame arresters and Flame Smart burner ...
By ASHCOR
-
ASHCOR - Model 200 - Standard Enclosed Combustor - Datasheet
ASHCOR Standard Combustors are made of a stainless steel body and designed to withstand heavy wind, harsh oil and gas environments and other stringent conditions. Built to promote environment and site safety, ASHCOR Standard Combustors have distinct features such as minimal noise pollution and reduced radiant heat. Enclosed Flares are equipped with ASHCOR flame arresters and Flame Smart burner ...
By ASHCOR
-
EnviCat LongLife - Catalytic Combustors for Wood Stoves Brochure
Captures More Heat Between 5% and 30% of the energy content of wood escapes up the chimney as smoke. At Clariant (and predecessor company Süd-Chemie) we‘ve been studying the problem of wood heating efficiency for more than thirty years. Clariant EnviCat LongLife Plus Combustors provide economical and environmental solutions for the burning of wood as a source of heat. These catalytic ...
-
MoistTech - Model CFB - Boiler Thermocouple Assemblies - Datasheet
TTEC CFB Boiler Assemblies are specially designed to withstand the highly erosive conditions found in Circulating Fluidized Bed Boilers. These rugged assemblies are installed throughout the Combustor Section, Cyclone Inlets, Cyclone Outlets and in the Coal/Ash Feed Lines. They provide critical temperature inputs to the Fluidized Bed Supervisory System for indication, control & safety. TTEC ...
-
Swebo - Biotherm Combustor Brochure
The SWEBO BioTherm is the result of a research and development project lasting many years and, like so many of our other products, it has made a significant impression on the market. Among other fuels, the burner can burn challenging fuels such as horse and chicken manure, extremely moist chips (with a moisture content of up to 61%), offal, etc. In other words, it is a genuine ...
-
FLOX - LCV Gas Utilization at Biogas Upgrading Plants - Brochure
SGV 700 combustor downstream a biogas upgrading plant (PSA) with heat recovery boiler, peak load boiler, and heat storage ...
By e-flox GmbH
-
e-flox - Model LCV - Compact Combustor - Brochure
The compact design LCV combustor was originally designed to serve PSA digester gas upgrading systems for municipal biogas or sewags sludge fermenters. It is able to burn up to 100 Nm³/h (NCMH) of LCV gas. For methane concentrations in the LCV gas of 7 Vol% it can burn the gas without auxiliary fuel. Up to 15 Vol% is possible. The detailed design is adopted by varying the size of the ...
By e-flox GmbH
-
PURGIT - Mobile Flare Systems - Brochure
Enclosed Combustors and open flares available for all environmental permitting requirementsGas assisted and air assisted flares availableFittings and hoses for all applicationsAll flares fitted with automatic pilotsystems and multiple layers of safetyCompliant with all state, federal, and Coast Guard ...
-
Infratech - Vent Gas Combustors - Brochure
Infratech’s combustion group offers sweet waste/vent gas combustors, designed to meet or exceed industry standards and applicable environmental regulations. Infratech waste/vent gas combustors are a cost-effective means of disposing of your volatile organic compounds. Only sweet gas with sufficient heating value to maintain stable combustion on its own may be burned in a combustor. ...
-
AEREON - Model Q-DEC - Quad O Designed Enclosed Combustor - Datasheet
AEREON has taken on some of its customers’ largest challenges in waste gas emissions, especially in the shale plays and AEREON’s Q-DEC product is the answer to one of those challenges. Q-DEC was designed to meet Quad O emissions requirements with an unprecedented “zero utility” smokeless burner. The Q-DEC uses a proprietary flame-spreading burner to ensure excellent ...
-
Kawasaki - GPB30/30D - Heavy Duty Single Combustor Gas Turbine Brochure
Co-Generation system GPB30DElectric Power 2.9MWe, Steam 10.2t/h, Dry Low Emissions15(104)kWe kJ/kW-hr % %°C (°F) x103kg/hr 2,190 17,475 9.7 20.6 82.52,950 15,290 9.6 23.5 75.702,850 15,510 10.2 23.2 79.340(32)(59)Electric Output Steam OutputHeat RateTotal Thermal EfficiencyElectrical EfficiencyAmb.temp. Elevation : 0 m Inlet Air Temperature : 15 °CInlet Air ...
-
Kawasaki - GPB17/17D - Heavy Duty Single Combustor Gas Turbine Brochure
Co-Generation system GPB17DElectric Power 1.7MWe, Steam 5.0t/h, Dry Low Emissions15(104)kWe kJ/kWe-hr % %°C (°F) x103kg/hr 1,200 15,910 4.8 22.6 83.61,910 13,160 5.2 27.4 77.801,630 13,870 5.0 26.0 80.140(32)(59)Electric Output Steam OutputHeat RateTotal Thermal EfficiencyElectrical EfficiencyAmb.temp. Elevation : 0 m Inlet Air Temperature : 15 °CInlet Air ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you