head-turbine Downloads
9 downloads found
The Nautilus T Medium Head turbine has been manufactured for over 10 years. Many of these turbines are installed in the U.K. and the United States. The hydraulic design is based on a utility grade Francis turbine that is reduced in size and fitted with a trapezoidal section scroll ...
The regulated CMC Ultra Low Head turbine (CMC-ULH) operates in a similar power range as the 660-ULH in an open flume and produces up to 1500 watts. The CMC offers better part gate regulation and efficiency than the other cylinder gate Nautilus ...
The Nautilus CMC Medium Head (CMC-MH) style turbine has been produced in the U.S. since the early 1900’s. This simple regulated Francis turbine is designed for heads of 3m to 12m and develops a maximum electrical output from 1,900 watts to 9.2 kw, depending on available ...
The T Ultra Low Head turbine (T-ULH) is the most powerful open flume turbine built by Nautilus. This unregulated design produces from 500 watts to 3,300 watts with a head range from 1m to 3.7m. Often two or three units are installed to match streamflow variation or the T-ULH is installed in combination with the Regulated CMC. For large open flume environments, where it is not possible to drain ...
Water turbine designed and developed to generate energy from water resources through the use of natural water pressure jumps, up to 10 m. The innovative electrical power system allows you to adapt the turning speed to changes in flow, for maximum efficiency without the need for adjustable blades. The Hydro Low Head turbine was developed alongside ...
The 660 Ultra Low Head turbine (660-ULH) is a 150mm (6in) diameter Francis turbine with a bronze runner and bronze and stainless steel guide vane and gate assembly. It uses a water lubricated rubber bearing below water and heavy duty spherical roller bearings above water to support the shaft and pulley assembly. The turbine case is fitted with an adjustable cylinder gate to turn the unit off and ...
The DIVE-Turbine is a vertical-axis propeller turbine with electronic regulation. The generator of the DIVE-Turbine is directly on top of the turbine runner and is completely submerged. The generated currency is prepared for grid feed-in by electronic ...
The selection of the best produc-tion configuration is then a difficult task if the hydraulic circuit head losses and the turbine hill-charts non-linearities are also considered. Thus, simple optimization tool can significantly help to improve a power plant annual production.OptiPower: Hydropower Generation Optimization ToolOptiPower is a custom designed software ...
Our modernized kaplan turbine is a a modular, low-head hydroelectric turbine design for projects 75kW to 250kW depending on site needs that can also be combined & scaled to fit much larger site requirements (one sized turbine that can be used with multiple sized generators). The NuTURBINE is ideal for many applications, including: isolated communities, retrofits of existing hydro sites, ...