voltage-logger Downloads
16 downloads found
The EC-3V has an integral Phase Sequence/Rotation Checker. The voltage levels are stored with dates and times. With the back-up battery, the Electrocorder data logger can continue to record for a year. The Electrocorder range use a constant sampling technique, unlike the single reading of competitors. When the loggers start to record, they sample ...
The EC-1V data logger is widely used to monitor voltage variations on site, allowing voltage problems to be highlighted quickly for further investigation using traditional recorders. When recording the Electrocorder will store the average voltage over the period chosen (1 sec to 60 min), it will also record the highest (max) & lowest (min) cycle values during that period. The Electrocorder ...
The EC-3V is designed to allow electrical engineers to cost effectively monitor single and three phase supplies. Our products allow voltage problems to be highlighted quickly and investigated. Setting up the Electrocorder EC-3V is easy, suitable for nontechnical staff. ...
Electrocorder Model:SL-3VThree phase; 500Vac (L1, L2 & L3 to Neutral) 145x89x45mm (6”x4”x2”) Complete with Electrosoft energy analysis softwareSealed to IP43 as standardSmall size 145x89x46mm, enables voltage problems to be highlighted quickly for further investigationData stored in non-volatile memory Memory capacity of 32,000 (True RMS) values per channel(10bit), up to 300 days ...
The DC-3V-60 data logger is specifically designed to accurately monitor one, two or three DC voltage channels, 1V to 60Vdc. ...
The EC-1V is designed to allow users to cost effectively monitor their voltage issues and is widely used for voltage optimisation (stabilisation) justification, used for pre and post installation analysis. ...
The DC-3V-60 data logger is specifically designed to accurately monitor one, two or three DC voltage channels, 1V to 60Vdc. ...
Electrocorder Model:EC-2VAT : +44 (0)870 225 1790F : +44 (0)870 225 1791E : sales@acksen.comacksen.comPowerfully MeasuredVersion 2.01.12.12One voltage channel300VacOne current channel 300AacComplete with Electrosoft energy analysis softwareSealed to IP65/NEMA 12/4 as standardAllows users to monitor & resolve single-phase voltage and current issuesData stored in ...
Electrocorder Model:EC-3VT : +44 (0)870 225 1790F : +44 (0)870 225 1791E : sales@acksen.comacksen.comPowerfully MeasuredVersion 2.00.12.12Three phase 500VacIntegral phase sequence or rotation checkerComplete with Electrosoft energy analysis softwareSealed to IP43 as standard, available as IP65/NEMA 12/4Allows engineers to quickly and cost effectively monitor & resolve single & 3-phase ...
TRMS three-phase voltage data logger; XL424 is a Data Logger capable of measuring and recording the true root mean square(TRMS) value of AC voltage up to 600V in three-phase 3-wire electric systems for different applications (evaluation of mains voltage, load unbalance, etc.). ...
TRMS three-phase voltage data logger; XL424 is a Data Logger capable of measuring and recording the true root mean square(TRMS) value of AC voltage up to 600V in three-phase 3-wire electric systems for different applications (evaluation of mains voltage, load unbalance, etc.). ...
The Electrocorder range use a constant sampling technique, unlike the single reading of competitors. When the loggers start to record, they sample every channel 16 times per cycle, a cycle is 16ms at 60Hz and 20ms at 50Hz. ...
The DCV-2 is an 8-channel, battery powered, stand alone voltage data logger. The logger records up to 2 million readings of data and stores it in non-volatile flash memory for later retrieval. Input voltage signals can be from sensors, transducers, transmitters or any other common voltage sources. Featuring ...
The Voltage Sensor Logger (VSL) is a stand-alone logging instrument for the measurement of any sensor with an analogue voltage output. The VSL can support up to five differential or up to ten single ended sensors with the same voltage input requirements. The VSL is a fully self-contained unit, only requiring power input from a ...
This single phase data logger is specifically designed to monitor one voltage channel and one current. It allows you to monitor the main voltage supply and the load current, enabling staff to determine whether a voltage problem is load related or not. ...
Electrocorder Model:EC-7VARThree voltage channels 500VacThree current channels 400A, 1kA, 2kA or 3kAacOne Power Factor (Cos) channel; phase angle between L1 and A1Complete with Electrosoft energy analysis softwareSealed to IP43 as standard, available as IP65/NEMA 12/4Records voltage, current, power factor, power and energyRecords voltage up to ...