Energy Management Articles

  • How to reduce Triad energy charges

    The winter Triad season is, once again, upon us and affecting business electricity bills.  It is important for organisations to carefully manage electricity consumption through the Triad season, which can help to dramatically decrease electricity costs. What are 'Triads' and what is the 'Triad' season? ...


    By Inprova Energy

  • Clean Growth Strategy: Anesco welcomes positive developments

    The Government today launched its highly anticipated Clean Growth Strategy. The 165-page document sets out proposals for decarbonising all sectors of the UK economy and explains how the country can benefit from low carbon opportunities, while meeting national and international commitments to tackle climate change. According to leading renewables developer Anesco, the strategy has finally provided ...


    By Anesco Ltd

  • Free guide to the ISO 50001 international energy management standard

    Inprova Energy eGuide explains everything you need to know about ISO 50001 and how it can benefit your organisation.  In this eGuide you'll learn... What ISO 50001 is and why organisations implement it. The benefits of ISO 50001. How to gain ISO 50001 accreditation. The benefits of using a Lead Auditor. ...


    By Inprova Energy

  • Clayhill – the UK’s first subsidy-free solar farm

    Project Outline: Clayhill solar farm, located in Milton Keynes, was officially opened on 26 September 2017 by Claire Perry MP, the UK Minister for Climate Change & Industry. It took 12 weeks to complete and combines the latest in solar and energy storage technology, with 10MW of solar PV co-located with 5 energy storage units totalling 6MW. Anesco’s team ...


    By Anesco Ltd

  • With the Right Policies, Wind Could Provide 30% of Europe’s Power by 2030

    Wind energy has the potential to provide up to 30% of Europe’s power by 2030 according to figures released today by WindEurope in its Outlook to 2020 and Scenarios for 2030 reports. According to WindEurope’s projections, Europe could be on course for an average ...


    By Smart Grid Observer

  • What is energy recovery?

    Processes like incineration and anaerobic digestion not only provide sources of energy, but they also reduce waste volume The term “energy recovery” often is applied only to a narrow number of methods for converting wastes into energy, when in fact it applies to a broad range of technologies used to create heat, electricity, or fuel. Energy recovery gives ...


    By Fluence Corporation

  • Renewable fuel and energy production solutions reduce your total cost of ownership – Case Study

    Biomass represents a fastgrowing solution for renewable fuel, which can help reduce the need for foreign oil and provide an environmentally-friendly alternative for energy production. Typical biomass sources include switchgrass, hemp, wheat straw, corn stover, woody materials, and sugarcane tops. It is no wonder why biomass is capturing so much market interest as a replacement for coal in energy ...

  • Emerging Asian Economies Drive the Increase in World Energy Use from 2015 to 2040

    World energy consumption is projected to increase by 28% by 2040, according to the International Energy Outlook 2017 (IEO2017), released today by the U.S. Energy Information Administration (EIA). Most of the world's growth in energy demand is projected to take place in countries outside of the Organization for Economic Cooperation and Development (OECD). China and ...


    By Smart Grid Observer

  • How to Manage risk in volatile energy markets

    In the last year wholesale power prices swung by around 45%, which is twice as volatile as the previous five years.  Those who fixed their electric bill for the next three years at the height of this market could  end up paying thousands of pounds more than others, who may have pursued a more calculated and less risky approach. Fixed vs. ...


    By Inprova Energy

  • Firebricks offer low-cost storage for carbon-free energy

    Original story at MIT News Ancient technology could be used to level electricity prices for renewables. Firebricks, designed to withstand high heat, have been part of our technological arsenal for at least three millennia, since the era of the Hittites. ...

  • Energy consumption in production of concrete

    Concrete is the most common construction material used in building industry. On average approximately 1 ton of concrete is produced each year for every human being in the world. Because of its abundance in the world market, understanding the environmental implications of concrete manufacturing is becoming increasingly important. The production of 1 m³ of concrete requires 2,775 ...


    By Geoplast US Corp.

  • Get more Bang for your Buck with Solar Thermal!

    The relative efficiency of renewable energy technologies – i.e. their ability to transform solar or wind energy into electricity and heat – is a key element in calculating the likely effectiveness and expected ROI of renewable installations. Recently published research shows that solar thermal technology is more efficient than any other renewable system. According to the latest ...


    By Kingspan Environmental Ltd

  • DESMI Automation has its eye on energy efficiencies

    Industrial pump and energy optimisation provider DESMI aims to be the go-to source for customers and companies that hope to solve energy optimisation problems smarter and more cost-effectively via automation. It’s hard not to be caught up in the enthusiasm of Brian Enevoldsen when he says: “We’re just scratching the surface of what automation technologies ...


    By DESMI A/S

  • ´We save 75% of Energy´ Japfa and MagFan - Case Story

    Investing for the future PT Japfa Comfeed Indonesia, one of Southeast Asia’s leading and most progressive integrators, decided to invest in MagFan for their new PS breeder farm in Central Java, The testing “The Danes told us a lot about the energy efficiency of these fans but we told them we wanted to test for ourselves before putting our name on a statement”, ...


    By DACS A/S

  • How to generate an accurate load profile for CHP

    If you fail to accurately work out your site's energy demands, you'll give rise to a cogeneration system that underwhelms when served up to your customer. That's why load profiling is the key ingredient in successfully specifying your cogeneration project and ensuring that you meet your clients' expectations. Generating an accurate ...


    By ENER-G

  • CHP Sizing: why Goldilocks style guesswork isn`t enough

    In storyworld, Goldilocks would stroll into the plant room and state "this CHP's too big", "this CHP's too small", "ahh ... this CHP is just right" – happy ever after. The end. But in the real word, the tricky issue of CHP sizing isn't quite so straightforward. This can be a tough lesson for some ...


    By ENER-G

  • What The AD Industry Can Learn From Solar Standardization

    Applying a proven project finance model to the anaerobic digestion industry is the best way to ensure projects get built and operate profitably over the long-term. THE U.S. anaerobic digestion (AD) market represents an attractive, multibillion dollar investment opportunity. However, structural industry obstacles must be overcome before the market can realize its full potential. As a ...


    By BioCycle Magazine

  • Fly Ash & the Lightweight Aggregate Market

    In 2015, the global fly ash market was estimated to be valued at 40 billion USD. A recent industry analysis by Research Nester anticipates the market will reach an estimated 70 billion USD by the end of 2023 – a 7.1% CAGR owing to increasing ...


    By FEECO International, Inc.

  • ComEd Energy Efficiency Program - Case Study

    311 South Wacker Drive Project Summary The illuminated crown at the top of 311 South Wacker is prominently featured in the Chicago night skyline. The 1.3 million square-foot Class A commercial office building was built in 1990 and acquired by Zeller Realty Group in 2014.The new owner significantly upgraded the infrastructure and amenities to provide an ...


    By Cypress Envirosystems

  • Case study - Building energy generation & usage

    A Scottish council looking to make financial savings due to recent budget cuts needed to make decisions on whether renewable energy could improve the efficiency of their existing buildings. They wanted a time saving system that would allow them to get instant live data whenever they needed it and which would store the data in an easy to read format so that they didn’t have to spend ...


    By Logic Energy Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you